HATOR Hyperpunk Truedots (HTA-410)

Product Overview

The HATOR Hyperpunk Truedots are TWS wireless earbuds. The product overview image displays the charging case in both open and closed states, along with the earbuds themselves. Key components are identified by labels:

• 1. Light indicator (on the charging case)
• 2. USB Type-C connector (on the charging case)
• 3. Ear cushions (attached to the earbuds)
• 4. Touch surface (on the earbuds)

Specifications

• Model: HATOR Hyperpunk Truedots
• BT version: BT5.3+BR+EDR+BLE
• 32-bit DSP processor
• Format support: MP2, MP3, WMA, APE, FLAC, AAC, MP4, M4A, WAV, AIF, AIFC
• Earbud battery: 30mAh
• Charging case battery: 400mAh
• Input voltage: 5V
• Approximate product weight: 36g
• Working time:
  • Earbuds: up to 4 hours
  • Earbuds + charging case: up to 24 hours
• Operating voltage: 3.3V-4.2V
• Charging time: 70 minutes
• Resistance: 32Ω
• Frequency playback range: 10Hz-20kHz
• Wireless connection distance: ≥10m

Package Contents

• Wireless earbuds (2pcs)
• Charging case
• USB cable
• User manual
• Ear cushions (3 pairs)

How to Use

1. Switch-on

Automatic (first use)

1. Open the charging case.
2. Take the earbuds out of the case. They will switch on immediately and start waiting for connection to your smartphone.

Manual

If the earbuds are off and not in the charging case, press the touch surface of both earbuds for 2 seconds.

2. Switch-off

Automatic switch-off

1. Remove the earbuds from your ears and place them in the charging case.
2. Close the lid of the charging case. The earbuds will automatically switch off and start charging.

Manual operation

1. If the earbuds are on, press the right and left earbuds simultaneously. They will switch off within 5 seconds.
2. Place the earbuds in the charging case and close the lid.

3. BT Pairing

1. Take the headphones out of the charging case.
2. Switch on Bluetooth (BT) on your device.
3. Find "Hyperpunk Truedots" in the list of available devices and click Pair.

Note: If pairing has already been performed, the earbuds will connect to the device via BT within 2-4 seconds after switching on. In case of failure to connect, the earphones will wait for connection for 3 minutes and then switch off.

Controls

Light Indicators

Warranty

Subject to the rules of operation and warnings in this user manual, the device ensures safe use, does not harm the environment or people, and is suitable for operation. The device has a warranty period of 12 months from the date of purchase, excluding time spent in repair (provided operation rules are followed). The right to a warranty is granted upon completion of the warranty card provided at the time of sale. For more detailed information, contact the address below.

Instructions for use:

• The product cannot be opened or modified.
• Do not disassemble the device or attempt to service it.
• If the product is used in an environment where the temperature exceeds the permissible range, turn off the device and wait until the operating temperature stabilizes within the specified range.
• Do not allow liquid to fall on the product.
• Use the product only with certified signal sources.
• Violation of the operating rules may lead to the loss of the ability to operate the equipment and the loss of the warranty.

If the product does not work properly, contact HATOR support. The warranty is in addition to the rights granted under local consumer laws. Its conditions may differ depending on the country.

Consumer rights regarding product warranty obligations may be exercised through retail outlets (including online stores), which are fully responsible for compliance with consumer rights protection laws.

Supplier/Importer in EU: HATOR Gaming B.V., Address: Prins Hendrikkade 21-E, 1012TL, Amsterdam, The Netherlands, sales@hator.gg

Warranty period: 12 months.

©2023 HATOR. All rights reserved. All registered trademarks are property of their respective owners.