Introduction
Welcome to the HATOR Hyperpunk 3 ESH10 in-ear gaming headset. This manual provides essential information for setup and use.
Package Contents
- HATOR Hyperpunk 3 ESH10 Headset
- Interchangeable Ear Tips (S, M, L)
- Detachable Microphone Boom
- Carrying Pouch
- User Manual
Key Features
- High-fidelity audio for immersive gaming.
- Comfortable in-ear design for extended wear.
- Detachable, noise-cancelling microphone for clear communication.
- Durable braided cable with in-line controls.
- Universal compatibility with PC, consoles, and mobile devices via USB-C.
Getting Started
Connect the headset to your device:
- Select the appropriate ear tip size for a secure and comfortable fit.
- Attach the detachable microphone boom to the headset's microphone port.
- Connect the headset's USB-C connector to the corresponding port on your PC, console, or mobile device.
- Ensure the headset is recognized by your device's audio settings.
In-line Controls
The in-line control module allows for easy management of audio and microphone:
- Volume Up Button: Increases the audio volume.
- Volume Down Button: Decreases the audio volume.
- Microphone Mute Button: Toggles the microphone on/off. [mic-mute-indicator]
- Play/Pause/Call Button: Controls media playback and call answering/ending.
Specifications
| Feature | Specification |
|---|---|
| Driver Size | 10mm Dynamic Drivers |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohms ± 15% |
| Sensitivity | 105dB ± 3dB |
| Microphone Type | Detachable, Omni-directional |
| Microphone Sensitivity | -42dB ± 3dB |
| Connector | USB-C |
| Cable Length | 1.2 meters (approx.) |
| Weight | Approx. 25g (without cable) |
Safety and Handling
Please follow these guidelines to ensure safe and optimal use of your headset:
- Avoid exposing the headset to extreme temperatures or moisture.
- Do not attempt to disassemble or repair the headset yourself.
- Listen at moderate volumes to prevent hearing damage.
- Keep the headset away from small children.
Troubleshooting
No Sound
Possible Cause: Volume too low or muted. Headset not selected as audio output device.
Solution: Check volume controls on the headset and device. Ensure the HATOR Hyperpunk 3 ESH10 is selected as the default audio output in your system settings.
Microphone Not Working
Possible Cause: Microphone muted. Microphone not selected as input device.
Solution: Unmute the microphone using the in-line control. Ensure the HATOR Hyperpunk 3 ESH10 microphone is selected as the default input device in your system settings.
Warranty Information
This product is covered by a limited warranty. Please refer to the warranty card included in the package or visit the HATOR website for full details.
