RC10 B7 Setup Sheet - Kamran Wells

Front Suspension

Setting	Value
Ride Height	19mm
Camber	-1
Toe	0
Anti-Roll Bar	None
Arm Type	kit
Tower Type	kit
Wheel Hex	5mm
Steering Block KPI	2
Caster Block Insert	0 ( ) +2.5 ( ) +5 ( )
Bulkhead Type	Aluminium [ ] Steel [ ]
Kick-Up Angle	-2.5 ( ) 0 ( ) +2.5 ( )
Steering Stop Spacing	0
Caster Block Spacing	Fwd [ ] Back [ ]

Diagram Description: Front suspension assembly details. Includes adjustments for Ball Stud Spacing (1mm, 2mm), Bump Steer Spacing (0mm), Steering Plate, Axle Height (+3, +2, +1, +0), Caster Block Link Mount (+1), and Front Bulkhead Spacing (0mm).

Notes: Outer camber link mount flipped. Centro C mount, Rear Arms flipped to gain drive shaft sweep.

Rear Suspension

Setting	Value
Ride Height	19mm
Camber	-1
Anti-Roll Bar	None
Arm Type	kit
Tower Type	kit
Arm Spacing	Fwd [ ] Mid [ ] Back [ ]
Wheel Hex	5mm
Hub Type	Std [ ] HRC [ ]
Hub Spacing	Fwd [ ] Mid [ ] Back [ ]
Drive Shaft	CVA's [ ] Universals [ ]

Diagram Description: Rear suspension assembly details. Includes C Mount (Aluminum [ ] Steel [ ]) and D Mount (Aluminum [ ] Steel [ ]) options, Axle Height (0, 1, 2, 3), Camber Link Spacing (2mm), and Ball Stud Spacing (1mm, 2mm).

Notes: Outer camber link mount flipped. Centro C mount, Rear Arms flipped to gain drive shaft sweep.

Electronics

Component	Details
Radio	Sanwa M17
Servo	Savox SB2274
EPA: Throttle	80 %
EPA: Brake	75 %
ESC	Hobbywing XR10 G2
ESC Settings
Motor/Wind	Hobbywing 6T
Pinion	23
Spur	78
Timing
Battery Mount	Std [ ] Offset [ ]
Battery	Centro 4600 LCG
Weight	70g under lipo

Drivetrain

Setting	Value
Differential
Ball Diff	[ ]
Gear Diff	[ ]
Height	2
Diff Setting

Shocks

Setting	Front	Rear
Piston	2x1.8 + 1x1mm	2x2 + 1x1mm
Thickness	2.5mm	2.5mm
Fluid	32.5wt	30wt
Spring	V3 Grey	V2 White
Limiters	Int: 0 ( ) Ext: 0 ( )	Int: 0 ( ) Ext: 0 ( )
Stroke	23	27
Eyelet	0	0
Cup Offset	0 ( ) +5 ( ) +9 ( )	0 ( ) +5 ( ) +9 ( )
Kashima Bodies	[ ]
Chrome Shafts	[ ]	[ ]
Machined Spacers	[ ]

Notes: Front wheels just lift.

Slipper Clutch

Setting	Value
Type	2 pad LCF
# of Pads	2
Setting	front wheels just lift

Track Info

Setting	Value
Size	Large
Surface	Astroturf
Traction	Low
Moisture	Lots
Condition	Very Wet
Temperature	20°C

Tires

Setting	Value
Front Tires	schumacher Cut Stagger
Front Compound	Silver
Front Insert	none
Rear Tires	Mezzo
Rear Compound	Silver
Rear Insert	Schumacher Medium
Wheel (F/R)	Schumacher

Body, Weight

Setting	Value
Body	kit
Front Wing	kit
Rear Wing	Centro
Wing Angle	0° ( ) 3° ( ) 6° ( )
Chassis Length	kit
Servo Weights	None
Electronic Weights	Steel
Total Vehicle Weight

Vehicle Comments

Notes: Cut Staggers glued down.

	RC10B7 Team Kit Setup Sheet and Specifications Detailed setup sheet for the Associated RC10B7 Team Kit RC car, including front and rear suspension, drivetrain, shocks, tires, and weight specifications.
	Team Associated RC10B7 Competition Buggy Kit Assembly Manual Comprehensive assembly manual for the Team Associated RC10B7 1:10 Scale 2WD Electric Off Road Competition Buggy Kit. Includes detailed step-by-step instructions, parts lists, tuning tips, and setup guides.
	Team Associated RC10 B7 Team Kit Setup Sheet Detailed setup sheet for the Team Associated RC10 B7 Team Kit, providing specific configuration parameters for suspension, drivetrain, electronics, and other components.
	Team Associated RC10 B74.2D CE Supplement and Setup Guide Detailed assembly instructions and setup guide for the Team Associated RC10 B74.2D CE, including differential and shock building steps, and a comprehensive setup sheet for tuning suspension, electronics, and more.
	Team Associated RC8B4.1 Nitro Buggy Setup Sheet - Neil Cragg BRCA Nationals Detailed setup sheet for the Team Associated RC8B4.1 1/8 nitro buggy used by Neil Cragg at the 2025 BRCA Nationals Round 4. Includes comprehensive settings for front and rear suspension, electronics, engine, differentials, shocks, clutch, gearing, tires, and body weight.
	Team Associated RC10B7 1:10 Scale 2WD Electric Off-Road Competition Buggy Kit Assembly Manual Comprehensive assembly manual for the Team Associated RC10B7 1:10 scale 2WD electric off-road competition buggy kit. Includes detailed step-by-step instructions, parts lists, tuning tips, and setup guides.
	Team Associated RC10 American Custom Semitruck 6x6 Electric Kit Manual Assembly manual for the Team Associated RC10 1:10 Scale American Custom Semitruck Electric Kit 6x6. Includes detailed instructions for building and maintaining the vehicle, features list, required additional items, and helpful tips.
	Team Associated #20186 Reflex 14B Kit: 1:14 Scale 4WD Electric Off-Road Buggy Discover the Team Associated #20186 Reflex 14B Kit, a high-performance 1:14 scale 4WD electric off-road buggy. Featuring Factory Team parts, adjustable components, and durable construction for thrilling RC racing.