Aqara Wireless Remote Switch T1 (Single Rocker) User Manual

Product Introduction

The Aqara Wireless Remote Switch T1 (Single Rocker) is a versatile remote control switch designed for smart home automation. It can be placed or stuck almost anywhere. Users can control various devices through single press, double press, or long press actions. When used with an Aqara Hub, it integrates with other smart devices to automate your home.

Note: This device requires a compatible hub. Some advanced features may require a specific hub. For a detailed list, please visit www.aqara.com/support.

Device Components:

• Push Button: The primary control surface.
• Indicator Light: Provides visual feedback.
• Slot: A slot on the side of the device.

Button Actions:

• Long Press for 10s: Connect to Network
• Press for 5 times: Effective Range Test/Identify Device

Quick Setup

1. Add the Hub to your app following the Hub Quick Start Guide.
2. Open the Aqara app, tap "Home", then tap the "+" icon in the top right corner to enter the "Add Device (Accessory)" page. Select "Wireless Remote Switch T1 (Single Rocker)" and follow the on-screen instructions.
3. For assistance, please visit www.aqara.com/support.

Troubleshooting: If the connection fails, move the accessory closer to the Hub and try again.

Installation

Effective Range Test: Press the reset button (push button) 5 times on the device at your desired position. If the Hub provides voice prompts, it indicates that the device can communicate effectively with the Hub.

Installation Tips:

• Avoid metal surfaces to maximize signal strength.
• Ensure the surface for attachment is clean and dry.

Option 1: Placement

Place the switch directly on the desired position.

[Illustration shows the switch being placed directly on a surface with a downward arrow indicating placement.]

Option 2: Adhesion

Remove the protective film from the back of the switch and stick it to the desired position.

[Illustration shows a hand peeling off a protective film from the back of the switch before sticking it to a surface.]

Specifications

Warnings

1. This product is NOT a toy. Please keep children away from this product.
2. This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
3. Beware of moisture; do NOT spill water or other liquids onto the product.
4. Do NOT place this product near a heat source. Do NOT place it in poorly ventilated or enclosed spaces.
5. Do NOT attempt to repair this product yourself. All repairs should be performed by an authorized professional. Contact support@aqara.kr for service.
6. This product is intended for improving home convenience and reminding users of device status. It is not recommended for security purposes in homes, buildings, or warehouses. The manufacturer will not be liable for any risks or property losses resulting from user non-compliance with instructions.

Manufacturer and Seller Information

Manufacturer: Lumi United Technology Co., Ltd.

Model: WXKG05LM

Certificate Number: R-C-LUt-WXKG04LM

Country of Manufacture: China

Importer/Seller: Aqara Korea (주)

[Certification mark K]

Note: This wireless equipment may cause radio interference during operation.

Zigbee 3.0 Install Code: Scan to get Zigbee 3.0 Install Code.

Contact Information:

• Online Customer Service: www.aqara.com/support
• Email: support@aqara.com
• A/S Inquiry (Korea): support@aqara.kr

Manufacturer Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.