WORX Landroid High Pitched Alarm
Get Started Guide
What's Included and What You'll Need
In the box:
- High Pitched Alarm unit
From your toolbox:
- Screwdriver [tool icon] (for installation)
About Your Landroid
This document provides instructions for installing the High Pitched Alarm accessory for your WORX Landroid Unmanned Mowing Vehicle. It is essential to read and understand the full Instruction Manual before operating your Landroid. Ensure your Landroid is updated with the latest software. You can download both the Instruction Manual and software updates from www.worx.com/landroid/support.
High Pitched Alarm Installation Steps
Follow these steps to install the High Pitched Alarm on your Landroid mower. This guide covers various Landroid models, including:
Landroid S 300 (WR130E)
Landroid M 500 (WR141E)
Landroid M 700 (WR142E)
Landroid M 1000 (WR143E)
Landroid L 1000 (WR147E)
Landroid L 800 (WR148E)
Landroid L 1500 (WR153E)
Landroid L 2000 (WR155E)
Landroid M Plus 500 (WR165E)
Landroid M Plus 700 (WR167E)
Step 1: Power Off and Access Panel
Ensure your Landroid is powered off. The display will show "OFF". Gently press the screen or the power button to confirm shutdown. Locate the access panel on the Landroid, typically on the top or side.
Step 2: Open the Landroid Cover
Open the main cover of the Landroid mower to access the internal components. An arrow indicates the direction to lift or open the cover.
Step 3: Insert the Alarm Unit
Identify the designated slot or mounting point for the alarm unit inside the Landroid. Use a screwdriver [tool icon] to remove any existing screws if necessary, and carefully insert the High Pitched Alarm unit into its position.
Step 4: Secure the Alarm Unit
Align the alarm unit with the mounting holes. Secure it using the provided screws. You should hear or feel a "CLICK!" [confirmation sound] when the unit is properly seated and secured.
Step 5: Connect Wiring
Locate the specific connector port on the Landroid's main board or wiring harness. Connect the cable from the High Pitched Alarm unit to this port. The connection is usually straightforward.
Step 6: Close the Cover
Once the alarm unit is securely installed and connected, close the Landroid's main cover, ensuring it latches properly.
Build Your Perfect Landroid
Enhance your Landroid experience with available accessories and features:
ACS (Anti Collision System)
The Anti Collision System [obstacle detection icon] helps your Landroid detect and avoid obstacles in the garden, navigating around them smoothly.
FindMyLandroid
Track your Landroid's location [location pin icon], providing peace of mind and security.
Off Limits
Define specific no-go zones [boundary icon] within your lawn, ensuring your Landroid stays within the desired mowing area.
RadioLink
Extend the communication range [signal bars icon] for your Landroid, allowing for more flexible operation.
Voice Control
Control your Landroid using voice commands [speech bubble icon] for added convenience.
WORX Landroid offers "Everything you need, nothing you don't."
Search Worx Landroid online.
