Plasma Cloud PAX1800 WiFi 6 Access Point

Introduction

Thank you for purchasing the PAX1800, a WiFi 6 AP. This Quick Start Guide is designed to guide you through the installation process.

Package Contents

• Access Point
• Mounting options (ceiling, wall, pole, t-rail)
• Closed cable housing lid
• Screws and screw plugs for various surfaces
• Cable ties

Cloud Management

1. Sign up at console.plasma-cloud.com.
2. Create your first organization by navigating to Organisations → Create new organisation. Fill in the form and click Create.
3. Create your first network by navigating to Networks → Create new network, fill in the form and click Create.
4. Set up your network by navigating to Settings → Network.
5. Create and configure your first SSID by navigating to Settings → SSIDs → Create new SSID.
6. Go back to Overview and click on the map to add your first Access Point. This can be repeated to add as many Access Points as needed.

Plug in your Access Point and connect it to the Internet. The Plasma Cloud configuration takes only a few seconds!

Physical Installation

This Access Point is designed for versatile installation and operates between 0°C ~ 40°C (32°F ~ 104°F). It includes mounting options for ceilings, walls, poles, and T-rails.

Powering the Access Point:

• 12V/2A DC power adapter*
• 48-54V/0.5A PoE injector (802.3at)**

*The output must comply with SELV of IEC 60950-1 or ES1 of IEC 62368-1 and limited power source requirements of IEC 60950-1 and IEC 62368-1. Contact your dealer or distributor for a standard power supply.

**All Ethernet cables are for intra-building connections. Do not connect these ports directly to communication wiring or other wiring exiting the building.

Pole Mounting

1. Slide the cable ties through the mounting plate and fasten them around the pole.
2. Slide the Access Point over the mounting plate.
3. Your Access Point is now safely tied to the pole.

Mounting Bracket Overview

Diagram showing the mounting bracket components and their assembly.

Wall Mounting

1. Use the provided screws and screw plugs to fix the mounting plate on the wall (compatible with US single gang box and US double gang box).
2. Slide the Access Point over the mounting plate.
3. Your Access Point is now safely attached to the wall.

T-Rail Mounting

1. Slide the T-rail mount into the slot of the Access Point.
2. Hook the stationary end of the mount bracket to the T-rail.
3. Your Access Point is now safely clipped to the T-rail.

Support

For additional technical guidance or to contact the support department, visit https://support.plasma-cloud.com.

Compliance Notices

FCC Compliance Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

IC Compliance Notice

This product meets applicable Innovation, Science and Economic Development Canada technical specifications. This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation. This device complies with the ISED radiation exposure limit for an uncontrolled environment and should be installed and operated with a minimum distance of 22 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Compliance Notice

This equipment complies with EU radiation exposure limits for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

The marking information is located at the bottom of the apparatus.

Privacy Notes

For the customer privacy policy, please visit: https://www.plasma-cloud.com/customer-policy/