Manuals+

Plasma Cloud PS48 Switch Quick Start Guide

This guide provides essential information for installing and setting up your Plasma Cloud PS48 48-Port Gigabit PoE+ Switch.

Introduction

Thank you for purchasing the PS48 Switch. This Quick Start Guide is designed to guide you through the installation process.

Package Contents

  • 1. Switch
  • 2. AC cord, 1830mm (The package contains either type A, C or G electrical outlet plug matching your region's power regulations.)
  • 3. Mounting brackets
  • 4. Screws
  • 5. Rubber feet set

Cloud Management Setup

Follow these steps to manage your switch via the Plasma Cloud console:

  1. Sign up at console.plasma-cloud.com.
  2. Create your first organization by navigating to 'Organisations' → 'Create new organisation'. Fill in the form and click 'Create'.
  3. Create your first network by navigating to 'Networks' → 'Create new network', fill in the form and click 'Create'.
  4. Set up your network by navigating to 'Settings' → 'Network'.
  5. Go back to 'Overview' and click on the map to add your first Switch. This step can be repeated to add as many Switches as needed.

You can now plug in your Switch and connect it to the Internet. The Plasma Cloud configuration typically takes a few seconds.

Physical Installation

This Switch is designed for indoor use only and can be installed on a desk, shelf, wall, or rack. It should not be connected to an Ethernet network with outside plant routing.

When installing your Switch, please keep the following in mind:

  • Do not place heavy objects on the Switch.
  • Do not place the Switch in direct sunlight and ensure sufficient space around the vents for airflow.
  • Do not place the Switch next to strong sources of electromagnetic fields.
  • Ensure the power cord is properly plugged into the Switch and a grounded power outlet.

Switch Overview

  • Console port
  • 48 Gigabit PoE+ ports (Up to 30W per port, 740W total PoE budget)
  • 4 SFP+ uplink slots (SFP modules not included)

Mounting Options

Desk or Shelf Mounting

This Switch can be placed on a desk or a shelf:

  1. Stick the provided rubber feet to the four circular marks on the bottom of the Switch. ?
  2. Place the Switch on the desk or shelf, ensuring the surface is level.

Wall Mounting

This Switch can be mounted either vertically or horizontally to a wall:

  1. Attach the two mounting brackets to the side of the Switch using the provided screws. ?
  2. Secure the Switch to the wall using wall anchors (not included), ensuring they can support the weight of the Switch and any additional cabling, with the ports facing either up or to the side. ?

Rack Mounting

This Switch can be mounted onto a standard rack:

  1. Attach the two mounting brackets to the side of the Switch using the provided screws. ?
  2. Secure the mounting brackets to an EIA standard size (19") rack. ?️

Support and Compliance

For additional technical guidance or to contact the support department, please visit support.plasma-cloud.com.

FCC EMC Compliance Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Models: PS48 Switch, 48 Port Gigabit 740W Managed PoE Switch, PS48 Switch 48 Port Gigabit 740W Managed PoE Switch, 740W Managed PoE Switch, 48 Port Gigabit PoE Switch

File Info : application/pdf, 2 Pages, 308.52KB

PDF preview unavailable. Download the PDF instead.

566601?download=true

References

Adobe PDF library 15.00 Adobe Illustrator CC 2015 (Windows)

Related Documents

PreviewPlasma Cloud PS24-L Switch: Quick Start Guide and Installation
Get started with your Plasma Cloud PS24-L 24-Port Gigabit PoE+ Switch. This guide covers unboxing, cloud management setup, physical installation (desk, wall, rack), and support.
PreviewPlasma Cloud PS8-L Switch Quick Start Guide
A concise guide to installing and setting up the Plasma Cloud PS8-L 8-port Gigabit PoE+ Switch, covering unboxing, cloud management, physical installation, and mounting.
PreviewPlasma Cloud PS24 Switch Quick Start Guide
A concise guide to installing and setting up the Plasma Cloud PS24 Switch, including package contents, cloud management, physical installation, and mounting options.
PreviewPlasma Cloud PAX1800 WiFi 6 Access Point Quick Start Guide
This guide provides instructions for installing and setting up the Plasma Cloud PAX1800 WiFi 6 Access Point, including physical installation, pole mounting, wall mounting, and T-rail mounting. It also covers cloud management setup and compliance notices.
PreviewPAX1800-Lite WiFi Access Point Quick Start Guide
This guide provides instructions for installing and setting up the PAX1800-Lite WiFi Access Point from Plasma Cloud, including cloud management, physical installation, and mounting options.
PreviewPAX1800-Lite Dual-band Access Point User Manual
User manual for the PAX1800-Lite Dual-band Access Point, featuring WiFi 6 (802.11ax) and 100% cloud management. Includes key features, technical specifications, and compliance information.