PAX1800-Lite Quick Start Guide

Support

For additional technical guidance or to contact support, please visit support.plasma-cloud.com.

For more product details, please visit plasma-cloud.com/pax1800-lite.

For our customer privacy policy, please visit plasma-cloud.com/customer-policy.

Package Contents

• Access Point
• Mounting options (ceiling, wall, pole, t-rail)
• Closed cable housing lid
• Screws and screw plugs for various surfaces
• Cable ties

Cloud Management

1. Sign up at console.plasma-cloud.com.
2. Create your first organization by navigating to 'Organisations' > 'Create new organisation'. Fill in the form and click 'Create'.
3. Create your first network by navigating to 'Networks' > 'Create new network'. Fill in the form and click 'Create'.
4. Set up your network by navigating to 'Settings' > 'Network'.
5. Create and configure your first SSID by navigating to 'Settings' > 'SSIDS' > 'Create new SSID'.
6. Go back to 'Overview' and click on the map to add your first Access Point. Repeat to add more Access Points.

Plug in your Access Point and connect it to the Internet. The Plasma Cloud configuration takes only a few seconds!

Physical Installation

This Access Point is permitted for indoor use only and can operate between 0°C ~ 40°C (32°F ~ 104°F).

It can be installed on various surfaces such as ceilings, walls, poles, and T-rails. The Access Point can be powered by a power adapter (48-54V/0.5A) or a PoE injector (802.3at).

Note: All ethernet cables are designed for intra-building connection. Do not connect these ports directly to communication wiring or other wiring that exits the building.

Mounting Bracket Overview

[Diagram illustrating the mounting bracket components and their assembly for different mounting types]

FCC Compliance Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

IC Compliance Notice

This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 21 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

French Translation: Ce produit répond aux spécifications techniques applicables à l'innovation, Science et Développement économique Canada. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage, et (2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme avec l'exposition aux radiations ISED définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimum de 21 cm entre le radiateur et votre corps. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou transmetteur.

CE / UK Compliance Notice

Plasma Cloud declares that the radio equipment type PAX1800-Lite is in compliance with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 SI 2017/1206.

The full text of the UK and EU declaration of conformity can be found by scanning the QR code on the right. [QR Code Placeholder]

This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

Applicable Countries: AT BE BG CH CY CZ DE DK UK EE EL ES FL FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK TR

Software License

The software included in this product contains copyrighted software that is licensed under GPL. A copy of that license, along with instructions on how to obtain the source code, is available at https://www.gnu.org/copyleft/gpl.html.

Product Information

Model: PAX1800-Lite

Manufacturer: Plasma Cloud Pte. Ltd.

Address: 36 Carpenter Street, #02-01, Carpenter Haus, 05995 Singapore

Website: www.plasma-cloud.com

Copyright: ©2025 Plasma Cloud Pte. Ltd. All Rights reserved.