Cal-Royal CGN Lock Template

Standard Packaging

• Latchbolt: 2-3/4"
• Face Plate: 1-1/8" x 2-1/4"

Latch Specifications

Standard 2-3/4" Latch

This configuration features a 2-3/4" latch. The associated faceplate is 1-1/8" (28.6mm) wide. The main door preparation hole for the latch is 1" (25mm) in diameter. Key dimensions relative to the door edge are: 5/16" (8mm) for vertical screw hole spacing, 2-1/4" (57mm) from the edge to the center of the latch hole, and 1-5/8" (41mm) from the edge to the bottom of the latch hole.

Optional 2-3/8" Latch

This configuration uses a 2-3/8" latch. The associated faceplate is 1" (25mm) wide. The main door preparation hole for the latch is 1" (25mm) in diameter. Key dimensions relative to the door edge are: 5/16" (8mm) for vertical screw hole spacing, 2-1/4" (57mm) from the edge to the center of the latch hole, and 1-5/8" (41mm) from the edge to the bottom of the latch hole.

Door Preparation and Backset Details

Bevel

The edge of the door preparation is beveled: 1/8" in 2" (3mm in 51mm).

Backset Options

The lock mechanism supports two backset options:

• 2-3/8" (60mm)
• 2-3/4" (70mm)

Main Door Hole Diameter

The primary hole for the lock cylinder and mechanism is 2-1/8" (54mm) in diameter.

Thrubolt Hole Diameter

The holes for the thrubolts are 5/16" (8.0mm) in diameter.

Thrubolt Hole Spacing

The center-to-center (CTC) spacing for the thrubolt holes is 2-3/4".

Latch Mechanism Holes

Additional smaller holes for the latch mechanism measure 5/32" or 1/8".

Door Handing

The template illustrates door handing configurations: Left Handed Doors (showing Outside and Inside views) and Right Handed Doors (showing Inside and Outside views).

Important Note

These specifications are applicable for all lock functions except the dummy function.

Manufacturer Information

CAL-ROYAL PRODUCTS, INC.

USA

CRP SECURITIES

USA

Address: 6605 Flotilla St. City of Commerce, CA 90040 USA

Tel: (323)888-6699

Website: www.cal-royal.com

Email: sales@cal-royal.com