ASUS MD102 Wireless Mouse
Model: MD102
Package Includes
- Mouse
- Nano USB 2.4GHz receiver (stored inside the mouse)
- 1 x AA battery
- Quick Start Guide
- Warranty Card
Specifications
Feature | Mouse | Dongle |
---|---|---|
Dimensions (L x W x H) | 118.9mm x 66.5mm x 42mm | 19.9mm x 14mm x 6.6mm |
Weight (without battery) | 69g | 1.6g |
Rating | 2.4GHz mode: 1.5V/30mA Bluetooth 5.0 mode: 1.5V/30mA | 5V/50mA |
Hardware Version | GFSK / Bluetooth: V05 | GFSK: V06 |
Software Version | GFSK / Bluetooth: V5.9 | GFSK: V6.95 |
System Requirements | Windows 10 or above / Chrome OS | |
Operating Temperature | 0 ~ 40°C | |
Operating Humidity | 20 ~ 85% | |
Storage Temperature | -40 ~ 60°C | |
Storage Humidity | 20 ~ 95% |
RF Output Information
UKCA RF Output Table (The Radio Equipment Regulations 2017)
Frequency Band | Mouse (2.4GHz mode) | Mouse (Bluetooth mode) | Dongle |
---|---|---|---|
2403-2480 MHz | 2403-2480 MHz | 2402-2480 MHz | 2403-2480 MHz |
Maximum output power (EIRP)
Device | 2.4GHz mode | Bluetooth mode |
---|---|---|
Mouse | <5 dBm | <5 dBm |
Dongle | <5 dBm |
CE RED RF Output Table (Directive 2014/53/EU)
Frequency Band | Mouse (2.4GHz mode) | Mouse (Bluetooth mode) | Dongle |
---|---|---|---|
2403-2480 MHz | 2403-2480 MHz | 2402-2480 MHz | 2403-2480 MHz |
Maximum output power (EIRP)
Device | 2.4GHz mode | Bluetooth mode |
---|---|---|
Mouse | <5 dBm | <5 dBm |
Dongle | <5 dBm |
Connecting to PC
The mouse features a power switch, a pairing button, forward and backward buttons, and indicator lights for low battery, DPI, and connection channel.
Via 2.4GHz:
- Slide the power switch to the 2.4GHz Mode.
- Insert the Nano USB receiver into an available USB port on your PC.
- When successfully paired to your PC, the Connection channel indicator will light up green and then turn off.
Via Bluetooth:
- Slide the switch to Bluetooth Mode.
- Press the pairing button for over 3 seconds to activate the Bluetooth pairing mode. (The indicator will flash blue rapidly)
- On Windows, right-click the Bluetooth icon on the right of the task bar (or double-click the Bluetooth icon in the Control Panel), then click Add a device > ASUS MD102 > Finish.
- When successfully connected, the indicator will stop flashing and remain in blue light for several seconds before it fades off. Once the mouse is set up on your PC, it will automatically connect to your PC the next time you turn to Bluetooth mode.
NOTE: The mouse supports Bluetooth 5.0.
Adjusting DPI and Understanding LED Indications
To adjust the DPI setting, hold down the left button and the scroll wheel for more than three seconds.
LED Color | Duration | Description |
---|---|---|
Green | Slow Flash | Awaiting dongle connection |
Constantly On | Dongle connected | |
Blue | Slow Flash | Awaiting Bluetooth connection |
Rapid Flash | Bluetooth pairing mode on | |
Constantly On | Bluetooth connected | |
Red | Continuous Flashing | Battery level below 20% |
White | Blink Once | DPI set to 800 |
Blink Twice | DPI set to 1200 | |
Blink Three Times | DPI set to 1600 |
Replacing the Battery
Replace the battery when the indicator flashes red, indicating that the mouse’s battery level is below 20%.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Safety and Compliance
This product complies with various regulations including CE Mark, FCC, RoHS, and E-waste management rules. For detailed information, please refer to the official ASUS website or the full documentation.
Manufacturer: ASUSTeK Computer Inc.
Authorized representative in Europe: ASUS Computer GmbH
Authorized representative in United Kingdom: ASUSTeK (UK) LIMITED
Recycling: ASUS offers recycling and takeback programs. Visit http://csr.asus.com/english/Takeback.htm for details.
Disposal: Do not dispose of this product in municipal waste. Follow local regulations for electronic product disposal.