ASUS ROG Harpe Ace Mini Gaming Mouse Quick Start Guide

Package Contents

The package typically includes the ROG Harpe Ace Mini gaming mouse, a USB Type-C to Type-A cable, a USB dongle, a wireless dongle extender, and possibly replacement mouse feet.

Mouse Features

The mouse features:

• Left-click button
• Scroll wheel
• DPI button
• Right-click button
• Forward button
• Backward button
• USB Type-C connector
• USB dongle
• Optical sensor
• Mouse feet
• Connection mode switch

Note: It is recommended to use the wireless dongle extender when using the mouse in RF 2.4GHz wireless mode. Mouse feet may need to be replaced before installing bundled ones.

Specifications

Resolution DPI ranges from 100 DPI to 42000 DPI. Customizable DPI settings are available for DPI 1-4 via Armoury Crate or the DPI On-The-Scroll tuning function.

Onboard Settings Adjustment

Key combinations can be used for onboard settings:

• Hardware Reset: Hold Left-click + Right-click + Scroll wheel + DPI button for 3 seconds. The Scroll LED will blink red during the process and green upon completion.
• Polling Rate Level Switch: Pairing button + Backward button cycles through polling rates: 125 Hz (red), 250 Hz (purple), 500 Hz (blue), 1000 Hz (green), 2000 Hz (yellow), 4000 Hz (blue-green), 8000 Hz (white). Note: BT not supported for polling rates above 500 Hz. Polling Rate Booster sold separately.
• Sensor Lift-off Distance Level Switch: Pairing button + Forward button cycles through Low (red, default) and High (purple) lift-off distances.

Connecting Your Gaming Mouse

Setting up as a Wired Mouse

Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer.

Setting up as an RF Wireless Mouse

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Setting up as a Bluetooth® Wireless Mouse

Set the connection switch to the Bluetooth® mode.

Pairing Bluetooth® Mode to Additional Host Devices (max. 3)

1. Set the connection switch to the Bluetooth® mode.
2. Press and hold the Pairing button for 3 seconds until the LED on your gaming mouse starts to blink blue. The LED indicator will light up blue for 3 seconds once successfully paired.

Updating Firmware and Customization

1. Connect your gaming mouse to your computer using the bundled cable and connect the USB dongle to a USB port.
2. Download and install the Armoury Crate software from https://rog.asus.com.
3. Follow the software instructions to update your gaming mouse and dongle’s firmware.
4. Customize your gaming mouse using Armoury Crate.

Using the DPI On-The-Scroll Tuning Function

This function allows DPI customization without Armoury Crate:

1. Press and hold the DPI button for 3 seconds until the mouse's LED lights up.
2. Scroll the scroll wheel forward or backward to adjust the DPI. The LED color will change based on the DPI setting.
3. Press the DPI button once to save the changes after customizing the DPI value.

Safety and Compliance Information

Keep the device away from liquids and operate within the specified temperature range (0°C to 40°C). Avoid short-circuiting contacts or disassembling the device. Use only manufacturer-approved batteries and accessories. Dispose of batteries responsibly according to local regulations.

The device complies with FCC Rules Part 15, ISED standards, and other regional regulations. RF exposure information and SAR limits are detailed, ensuring compliance with government requirements for radio frequency energy exposure.

For detailed recycling information and compliance declarations, refer to the ASUS website.