Royal Gourmet GB8000 Large Event 8-Burner Gas Grill
Assembly Guide | Guía de Montaje | Guide d'Assemblage
Safety & Contact Information
FOR YOUR SAFETY! | ¡PARA SU SEGURIDAD! | POUR VOTRE SÉCURITÉ!
- Use outdoors only!
- Read the instructions before assembling and using the appliance.
CONTACT US FIRST! | ¡PÓNGASE EN CONTACTO CON NOSOTROS PRIMERO! | CONTACTEZ-NOUS D'ABORD!
If you have any questions that are not addressed, please contact us first.
Customer Service / Servicio al Cliente / Service de Clientèle:
1-800-618-6798
service@royalgourmetusa.com
Learn more at: www.royalgourmetcorp.com
Parts List
| No. | Part # | QTY | Description | Image |
|---|---|---|---|---|
| 1 | H-GD80022 | 1 | Bottom shelf | Horizontal shelf with multiple slats. |
| 2 | W-GD80002 | 4 | Caster | Caster wheel with a mounting plate. |
| 3 | H-GD40026 | 1 | Right front leg | Single leg piece with mounting holes. |
| 4 | H-GD40027 | 1 | Right back leg | Single leg piece with mounting holes. |
| 5 | H-GD40022 | 1 | Left front leg | Single leg piece with mounting holes. |
| 6 | H-GD40024 | 1 | Left back leg | Single leg piece with mounting holes. |
| 7 | H-GD80021 | 2 | Cart beam | Long horizontal support beam. |
| 8 | Z-GD400101 | 2 | Side cart beam | Shorter horizontal support beam. |
| 9 | Z-GD400108 | 2 | Shelf support | L-shaped bracket for shelf support. |
| 10 | Z-GD800103 | 1 | Upper shelf | Horizontal shelf with multiple slats. |
| 11 | Z-GD800107 | 4 | Grease cup brace | Small bracket for grease cup. |
| 12 | Z-GD800109 | 2 | Grease cup | Small cup-shaped container. |
| 13 | 1 | Main body | Main grill body with burner openings and control panel. | |
| 14 | Z-DXL14015 | 2 | Side table joint | Hinge or connecting bracket for side table. |
| 15 | Z-DXL14016 | 2 | Side table joint | Hinge or connecting bracket for side table. |
| 16 | W-DXL14003 | 2 | Side table support bar | Support bar for the side table. |
| 17 | H-GD800020 | 2 | Side table | Foldable side table. |
| 18 | H-GB800301/H-GB800302/H-GB800303 | 1 | Wind deflector | Metal shield to deflect wind. |
| 19 | W-GD430016 | 2 | LP cylinder hook | Hook for securing an LP gas cylinder. |
| 20 | W-GD430017 | 2 | LP cylinder base | Base for securing an LP gas cylinder. |
| 21 | Z-GD600101 | 1 | LP cylinder barrier bar | Safety bar for LP gas cylinder. |
| 22 | W-GC33A016 | 8 | Flame tamer | Metal plate placed above burners. |
| 23 | W-GD40001 | 5 | Cooking grate | Grill grate sections. |
| 24 | XN101RGC | 8 | Knob | Control knob for burners. |
| 25 | W-GC33E005 | 2 | Grease tray handle | Handle for the grease tray. |
| 26 | Z-GD800105 | 2 | Grease tray | Tray to collect grease. |
Hardware List
| Key | Description | QTY | Image |
|---|---|---|---|
| A | M6x12 | 51 | M6x12 screw with Phillips head [plus-minus] |
| B | M5x10 | 16 | M5x10 screw with Phillips head [plus-minus] |
| C | M4x8 | 6 | M4x8 screw with Phillips head [plus-minus] |
| D | M6 | 2 | M6 bolt [plus-minus] |
| E | M6x15 | 4 | M6x15 screw with Phillips head [plus-minus] |
| F | M6x20 | 8 | M6x20 screw with Phillips head [plus-minus] |
| G | M6x25 | 8 | M6x25 screw with Phillips head [plus-minus] |
| H | Pin | 4 | Pin [pin] |
| I | Split pin | 4 | Split pin [split-pin] |
Tools Required
Phillips screwdriver [screwdriver], Wrench [wrench]
General Notes
Before beginning assembly, make sure all parts are present. If any parts are missing or damaged, do not attempt to assemble the products. Contact customer service for replacement parts via telephone or email.
- Tools needed (not included): Phillips screwdriver and wrench
- Approximate assembly time: 45 minutes
- Note: 1. The right and left sides of the grill are designed as if you are facing the front of the grill.
- Note: 2. Model shown for illustration purpose only, specific please in kind prevail.
Assembly Instructions
Step 1
Attach casters (2) to the bottom shelf (1) using 16 B screws (M5x10).
Image Description: Bottom shelf (1) shown upside down, with casters (2) being attached to each corner using screws.
Step 2
Attach legs (3, 4, 5, 6) to the bottom shelf (1) using 8 G bolts (M6x25).
Image Description: Bottom shelf (1) with four legs (3, 4, 5, 6) being attached to the sides and front/back using bolts.
Step 3
Attach cart beams (7) to the legs using 2 A screws (M6x12).
Image Description: The partially assembled base with legs, showing cart beams (7) being attached horizontally between the legs using screws.
Step 4
Attach shelf supports (9) to the legs and attach the upper shelf (10) using A screws (M6x12) and D bolts (M6).
Image Description: The base structure with cart beams, showing shelf supports (9) being attached to the legs, and the upper shelf (10) being placed and secured with screws and bolts.
Step 5
Attach cart beams (7) to the legs using 4 A screws (M6x12).
Image Description: The base structure, showing additional cart beams (7) being attached horizontally between the legs using screws.
Step 6
Attach side cart beams (8) to the legs using 12 A screws (M6x12).
Image Description: The base structure, showing side cart beams (8) being attached vertically to the legs using screws.
Step 7
Attach grease cup braces (11) to the main body frame using 8 F screws (M6x20).
Image Description: The main grill body frame, showing grease cup braces (11) being attached to the underside using screws.
Step 8
Insert grease cups (12) into the braces (11).
Image Description: The main grill body frame, showing grease cups (12) being slid into the previously attached braces.
Step 9
Release regulator assembly & ignitors in advance. Attach the main body (13) to the base structure using 4 A screws (M6x12).
Image Description: The main grill body (13) is being lowered onto the assembled base structure and secured with screws.
Step 10
Attach side table support bars (16) to the main body using 8 A screws (M6x12).
Image Description: The main grill body, showing side table support bars (16) being attached to the sides using screws.
Step 11
Attach side table joints (14, 15) to the main body using 8 A screws (M6x12). Note direction. Do not secure bolts until step 12.
Image Description: The main grill body, showing side table joints (14, 15) being attached to the sides using screws. A close-up shows the orientation of the joint.
Step 12
Attach side tables (17) using H pins (4) and I split pins (4).
Image Description: The main grill body with side tables attached, showing pins (H) and split pins (I) being used to secure the side tables.
Step 13
Assemble hooks & bases on both sides. Attach wind deflector (18) to the main body using 9 A screws (M6x12) and 6 C screws (M4x8). Attach LP cylinder hooks (19) and bases (20) using A screws.
Image Description: The main grill body, showing the wind deflector (18) being attached to the back, and LP cylinder hooks (19) and bases (20) being attached to the frame.
Step 14
Visual confirmation of the assembled structure with side tables attached.
Image Description: The grill structure with side tables attached, showing the overall assembly so far.
Step 15
Visual confirmation of the assembled structure.
Image Description: The grill structure with side tables attached, showing the overall assembly so far.
Step 16
Insert AA battery (not included) [battery] into the ignitor. Attach knobs (24).
Image Description: A close-up of the ignitor assembly showing where to insert an AA battery. Another view shows knobs (24) being attached to the control panel.
Step 17
Attach grease tray handles (25) to grease trays (26) using 4 E screws (M6x15).
Image Description: Grease trays (26) with handles (25) being attached using screws.
Step 18
Visual confirmation of the assembled structure.
Image Description: The grill structure with side tables attached, showing the overall assembly so far.
Step 19
NOTE: Secure cylinders onto hooks and bases.
Image Description: Diagram shows an LP gas cylinder being placed onto the hooks and bases on the side of the grill. A crossed-out cylinder [no-cylinder] indicates incorrect placement or prohibition. A correct placement shows a cylinder [cylinder] secured.
Thank You
Thank You For Choosing Us.
Any Problem! We Can Help!
Customer Service
1-800-618-6798
Monday to Friday (8:30 am - 5:30 pm EST)
service@royalgourmetusa.com
