Customer Service: 1-800-618-6798
Assembly Guide
Model: SG3001
3-Burner Gas Grill with Side Burner
Certified by ETL US Listed, Intertek 4007749
For Your Safety!
Use outdoors only! Do not use it in a building, garage or any other enclosed areas.
Read the instructions before assembling and using the appliance.
DO NOT use the grill unless it is completely assembled and all the parts are securely fastened.
This grill will become very hot, do not move it during operation. Keep children and pets away.
Contact Us First!
This grill has been made to high quality standards. If you have any questions that are not addressed in this manual, or you need parts, please call our customer service hotline or send an email to service@royalgourmetusa.com.
Learn more at: www.royalgourmetcorp.com
Explosion View
An exploded view diagram illustrating all components of the Royal Gourmet SG3001 gas grill, with each part labeled with a reference number for easy identification during assembly.
Parts List
| Ref | Description | Illustration | QTY |
|---|---|---|---|
| 1 | Thermometer W-CQ020017 | [Thermometer] | 1 |
| 2 | Warming rack ZH-GS030002 | [Warming Rack] | 1 |
| 3 | Cooking grate W-GS02A005 | [Cooking Grates] | 2 |
| 4 | Flame tamer Z-GS030027 | [Flame Tamers] | 3 |
| 5 | Main body Z-GS030002 | [Main Body] | 1 |
| 6 | Side table Z-GS030022 | [Side Table] | 1 |
| 7 | Thermal baffle Z-GS030011 | [Thermal Baffle] | 1 |
| 8 | Left back leg(LB) Z-GS030006 | [Left Back Leg] | 1 |
| 9 | Leg connector upper Z-GS030003 | [Leg Connector Upper] | 2 |
| 10 | Screw W-GD401006 | [Screw] | 1 |
| 11 | Tank holder Z-GS030014 | [Tank Holder] | 1 |
| 12 | Left front leg(LF) Z-GS030005 | [Left Front Leg] | 1 |
| 13 | Leg connector lower Z-GS030001 | [Leg Connector Lower] | 2 |
| 14 | Wheel & cover W-20130010 W-20130006 | [Wheels and Covers] | 2 |
| 15 | Wheel axle W-GS030004 | [Wheel Axle] | 1 |
| 16 | Washer W-10030004 | [Washers] | 2 |
| 17 | Foot W-GS030005 | [Feet] | 2 |
| 18 | Right front leg(RF) Z-GS030007 | [Right Front Leg] | 1 |
| 19 | Right back leg(RB) Z-GS030008 | [Right Back Leg] | 1 |
| 20 | Cart board lower Z-GS030029 | [Cart Board Lower] | 1 |
| 21 | Leg connector back Z-GS030002 | [Leg Connector Back] | 1 |
| 22 | Cart board upper Z-GS030028 | [Cart Board Upper] | 1 |
| 23 | Grease cup YB001 | [Grease Cup] | 1 |
| 24 | Grease cup brace YJ001 | [Grease Cup Brace] | 1 |
| 25 | Knob W-CQ020020 | [Knob] | 1 |
| 26 | Knob base W-11030001 | [Knob Base] | 1 |
| 27 | Side burner shelf H-GS030002+Z-20130035 W-20130022 | [Side Burner Shelf] | 1 |
| 28 | Side burner grate W-20130033 | [Side Burner Grate] | 1 |
| 29 | Side burner W-GS030016 | [Side Burner] | 1 |
| 30 | Electrode W-GC33E012 | [Electrode] | 1 |
| 31 | Extension wire W-GD430013 | [Extension Wire] | 1 |
Hardware List
| Category | Description | Illustration | QTY |
|---|---|---|---|
| A | M5X10 | [Bolts] | 52pcs |
| B | M4X8 | [Bolts] | 5pcs |
| C | Split pin | [Split Pins] | 2pcs |
Preparation
Before beginning assembly, make sure all parts are present. Compare parts with packaged contents list and diagram above. If any parts are missing or damaged, do not attempt to assemble the products. Contact customer service for replacement parts via telephone or email.
- Estimated assembly time: 40 minutes
- Tools required for assembly: Phillips Screwdriver, Wrench
- Phillips Screwdriver (not included) and Wrench (not included)
- Note: The right and left sides of the grill are designed as if you are facing the front of the grill.
Assembly Instructions
Step 1
Assemble the leg connector upper (9) and leg connector lower (13) to left front leg (LF)(12) and left back leg (LB)(8) with 8 bolts (A).
Step 2
Assemble the leg connector upper (9) and leg connector lower (13) to right front leg (RF)(18) and right back leg (RB)(19) with 8 bolts (A).
Step 3
Assemble the leg connector back (21) to left and right side legs with 4 bolts (A).
Step 4
Assemble the cart board upper (22) and cart board lower (20) to left and right side legs with 8 bolts (A).
Step 5
Slide the wheel axle (15) through the left legs (12, 8), attach the wheel washers (16) and wheels (14) on the axle from both sides. Secure them with 2 split pins (C). Attach the wheel cover back to the wheels. Assemble the thermal baffle (7) to leg connector upper (9) with 4 bolts (A). Install the feet (17) to the right legs.
Step 6
Place the main body (5) onto the cart, fasten it with 8 bolts (A). Insert the extension wire (31) to the leg connector upper (9) as shown.
Step 7
Screw 4 bolts (A) half way on the main body.
Step 8
Assemble the side table (6) to the mainbody by hanging it to the half screwed bolts, fasten it with 4 bolts (A). Then secure the half screwed bolts.
Step 9
Assemble the side burner shelf (27) to the mainbody by hanging it to the half screwed bolts, fasten it with 4 bolts (A). Then secure the half screwed bolts.
Step 10
Make the valve insert through the hole of side burner shelf decoration. Install the knob base (26) to the side burner shelf decoration with 2 bolts (B).
Step 11
Assemble the burner (29) by sliding on the top center of the side burner shelf. Affix the terminal to the valve. Fasten burner to shelf with 2 bolts (B).
Step 12
Assemble the electrode (30) to side burner shelf with 1 bolt (B). Insert the ignition line to the electrode hole as shown.
Step 13
Place the flame tamers (4) into the gas grill. Install the knob (25) onto the valve. Place the side burner grate (28) to the side burner shelf.
Step 14
Place the cooking grates (3) onto the main body. Assemble the warming rack (2) to the main body and lid.
Step 15
Install the thermometer (1) to the lid. Hang the grease cup brace (24) underneath the main body, place the grease cup (23) onto the brace. Assemble the tank holder (11) to leg connector upper with screw (10).
Step 16
The final assembled grill, including the main body, side tables, shelves, and attached propane tank.
