Secretlab OTTO™ Adjustable Legrest
Designed for Secretlab Chairs
Elevate your relaxation to new heights with the Secretlab OTTO™ Adjustable Legrest, designed for perfect integration with your Secretlab chair. Experience customizable comfort with adjustable height and tilt angles, while enjoying ergonomic benefits that enhance blood circulation and support your lower limbs. Indulge in unparalleled lounging and rejuvenation with the Secretlab OTTO™.
Quick Start Guide
Assembly
Estimated Time: 5 mins
Important Safety Information
- ❗ Do not sit on the legrest.
- ❗ Do not stand on the legrest.
- ❗ Do not remove the red safety screw until the base is assembled.
Step 01: Base Assembly
Gently lift and place the legrest upside down. Insert the base into the main column. Insert the 4 screws and secure them with the screw handle provided.
Visual Description: Diagram shows the legrest upside down. The base is inserted into the main column. Four screws are secured with a screw handle. An inset shows aligning a notch on the base to a slot on the main column for correct orientation.
Step 02: Final Setup
Gently lift and flip the legrest upright. Remove the red safety screw located on the right side of the legrest.
Visual Description: Diagram shows the legrest flipped upright. An inset highlights the removal of a red safety screw from the right side.
Usage
Adjustments
Note: Do not adjust with weight on the cushion.
Height Adjustment
Visual Description: Diagram illustrating the height adjustment mechanism.
Tilt Angle Adjustment
Visual Description: Diagram illustrating the tilt angle adjustment mechanism.
Recommended Positions
Upright
Lock your chair tilt slightly back to relieve pressure on your lower spine. Set the legrest height level with the top of the tilted seat and adjust the legrest tilt to the steepest angle.
Visual Description: Diagram shows a person seated upright in a chair with the legrest extended and tilted steeply upwards.
Reclined
Lock your chair tilt slightly back to relieve pressure on your lower spine. Set the legrest height level with the top of the tilted seat and adjust the legrest tilt to flat or slightly tilted.
Visual Description: Diagram shows a person reclining in a chair with the legrest extended and adjusted to a flat or slightly tilted position.
Once set up, the cushion can be adjusted to tilt across 5 incline angle settings (0°, 7.5°, 15°, 22.5°, and 30°). Do not try to compress the cushion to its out-of-box setting (>30°).
