Owner's Manual & Safety Instructions
Save This Manual. Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Brand: FRANKLIN
Model: 58299
Website: http://www.harborfreight.com
Technical Support Email: productsupport@harborfreight.com
Technical Support Phone: 1-888-866-5797
A clear image of the Franklin Folding Platform Truck shows a sturdy metal platform with raised edges, two large rear wheels, two smaller front swivel casters, and a foldable handle with a grip. The truck is depicted in an upright, ready-to-use position.
WARNING: Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Important Safety Information
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and when folding or unfolding.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of drugs or medication.
Operation Precautions
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacity. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Specifications
| Platform Size | Weight Capacity |
|---|---|
| 24" x 36" | 440 lb. |
Assembly Instructions
Note: If desired, the Fixed and Swivel Casters (5, 6) can be installed on opposite ends.
- Attach the Fixed Casters (5) to the Platform (4) near the Handle Bracket (3) using Washers (7) and Bolts (8).
- Attach the Swivel Casters (6) to the other end of the Platform (4) using Washers (7) and Bolts (8).
- Tighten all Bolts (8) securely.
This diagram illustrates the attachment of casters to the platform. It shows the underside of the platform with mounting holes. Two fixed casters (Part 5) are shown being attached to one end using bolts (Part 8) and washers (Part 7), near the handle bracket (Part 3). Two swivel casters (Part 6) are shown being attached to the opposite end, also using bolts (Part 8) and washers (Part 7).
Operation Instructions
- To unfold, pull up on Handle (1) until it locks into place.
- To fold, step on the bar at the base of the Handle (1), see illustration to the right.
- Push the Handle (1) forward until it lays flat.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Parts List and Diagram
| Part | Description | Qty. | Part | Description | Qty. |
|---|---|---|---|---|---|
| 1 | Handle | 1 | 4 | Platform | 1 |
| 2 | Baffle | 1 | 5 | Fixed Caster | 2 |
| 3 | Handle Bracket | 1 | 6 | Swivel Caster | 2 |
| 7 | Washer | 16 | 8 | Bolt | 16 |
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Note: Reference UPC 193175436719.
An exploded view diagram displays all components of the folding platform truck. The main platform (Part 4) is shown. The handle assembly (Part 1) and baffle (Part 2) are depicted. Four casters, two fixed (Part 5) and two swivel (Part 6), are shown with their respective bolts (Part 8) and washers (Part 7) for attachment to the platform.
