4099 Configuration Toolkit for Mascot Lead Acid Battery Chargers
Mascot tech spec
All Mascot Lead Acid battery chargers marked with the CBC symbol may be configured through the output cable using a toolkit consisting of a CBC module, a USB cable, and Mascot configuration software for PC.
The CBC Toolkit is ideal for optimizing battery performance for a wide range of applications. There are 22 different parameter settings and 7 additional enable/disable functions available.
[Illustration of a laptop displaying the Mascot Configuration Software interface, connected via USB cable to a Mascot CBC module, which is in turn connected to a Mascot battery charger.]
Key configuration / charge detection variables:
- Charge voltages (If PTC is not used)
- Diode compensation level. Increase in voltage to compensate for diode in series
- Cut-off current level to go to float
- Temperature limits (Hot, cold, charge pause ++)
- Float pulse interval and time.
- Recharge voltage level
- Timers: Soft start timer, CV charge timer and Safety timer
| Parameter | Value | Unit |
|---|---|---|
| Softstart Time | 1 800 | s |
| Charge Time | 240 | min |
| Safety Time | 4 320 | min |
| Battery Voltage Maintenance Delta | 1,03 | V |
| NoPTC_DACBoost | 14,702 | V |
| NoPTC_DACMaint | 13,678 | V |
Functions (enable/disable):
- [ ] Read protect
- [ ] Write protect
- [ ] PTC required
- [ ] No PTC
- [✓] Suspend when cold
- [ ] Float charge only
- [✓] Pulsed float charge
The CBC system is easy to set-up and connect
- Select Mascot standard to configure
- Connect the charger and set-up the communication
- Make the custom configurations
- Send the new parameter(s) to the charger
Included in the toolbox:
- Mascot CBC module (hardware interface)
- 3546 12V LA Battery Charger
- 3743 24V LA Battery Charger
- USB Cable for connecting to a PC
- Mascot Configuration Software
- Printed user guide and videos with user instructions
Notes
- It's possible to read the current configuration from the charger [configuration diagram]
- Ordering information: For the CBC toolkit, use part no. 4099000041 For additional modules, use part no. 4099000000
Content
Mascot Blueline 3546 12V LA Charger
Mascot Blueline 3743 24V LA Charger
Mascot Interface Module for Blueline. Part no.: 4099000000
Mascot Interface Software
USB cable
[Screenshot of the Mascot Configuration Tool Kit software interface. It features a table with configuration parameters such as 'ModeFlags', 'ChargeCurrentFastCharge', 'Start Time', and 'Safety Time', showing their values, units, minimums, maximums, and descriptions. A list of 'Content' is also displayed, detailing the included items: Mascot Blueline 3546 12V LA Charger, Mascot Blueline 3743 24V LA Charger, Mascot Interface Module for Blueline (Part no.: 4099000000), Mascot Interface Software, and USB cable. A Mascot Blueline charger is pictured to the right.]
