Mascot User Manual: Charger for Lead Acid Batteries

Updates and Language Manuals

Updates and language-specific user manuals are available on www.mascot.no/downloads/usermanuals.

Available languages include: English, Swedish (Bruksanvisning), Finnish (Käyttöohjeet), German (Bedienungsanleitung), French (Mode d'emploi), Spanish (Manual de instrucciones), Italian (Istruzioni per l'uso).

MASCOT ELECTRONICS AS Contact Information

P.O. Box 177, N-1601 Fredrikstad, NORWAY

Phone: +47 69 36 43 00

Telefax: +47 69 36 43 01

E-mail: sales@mascot.no

Web: www.mascot.no

Document No. 5150G - Part No. 205150 - Date: 11.02.2025

IMPORTANT SAFETY INSTRUCTIONS!

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK:

READ THROUGH THESE INSTRUCTIONS PRIOR TO USING THE PRODUCT.
CAREFULLY FOLLOW THESE INSTRUCTIONS WHEN USING THE PRODUCT.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CAUTION! DOUBLE POLE / NEUTRAL FUSING!

This product is designed for indoor use (Not applicable to products marked "IP67").

IP Ratings Explained:

IP41: Protected against ingress of solid objects larger than 1.0 mm and the effects of vertically falling drops of water (according to EN/IEC 60529).
IP4X or IP40: Protected against ingress of solid objects larger than 1.0 mm.
IP44: Protected against ingress of solid objects larger than 1.0 mm and the effects of water splashed against the enclosure from any direction (according to EN/IEC 60529).
IP67: Dust-tight and protected against the effects of temporary immersion in water (according to EN/IEC 60529), but must not be immersed for longer periods. These versions are often filled with potting compound.

Insulation Class:

Products marked with the "double square symbol" ? are double insulated (Insulation Class II).
Products without this mark are Class I (rely on safety earth for protection).

WARNING: To avoid risk of electric shock, Class I products must only be connected to a supply mains with protective earth.

End-of-Life Disposal:

Electric and electronic equipment shall not be discarded with municipal waste. Dispose of using separate collection, treatment, recovery/recycling, and environmentally sound disposal methods. Contact local authorities for proper methods.

Technical specifications are available on the product marking or at www.mascot.no.

Cautions to Observe Prior to Use

Intended Use: To charge batteries (NiCd/NiMH, Lead-Acid, Lithium-Ion, LiFePO₄) or to be used as a Power Supply for electrical accessories. Verify product type and read applicable instructions.
May be used by unskilled operators if instructions are followed. Contact supplier/manufacturer for assistance.
Children aged 8+ and persons with reduced capabilities may use with supervision, understanding hazards. Keep away from small children to prevent strangulation risk from cables or inhalation/swallowing risk from small parts.
Keep animals away to prevent damage to cables (risk of electric shock, overheating) or strangulation.
Check mains cord for damage. If damaged, do not use until replaced by qualified personnel.
Ensure the mains socket outlet used is easily accessible for immediate removal of the mains supply. A detachable cord's coupler can serve as a disconnect device.
The product is switched ON by inserting the mains plug and OFF by disconnecting it.
Can be connected to an IT type mains supply.
For use in U.S.A.: Use 125V 15A receptacle. Use a UL817-standard compliant mains cord (NEMA 1-15 plug, SJT or SVT cord).
For use outside U.S.A: Use a mains cord compliant with country-specific requirements.
Full function start-up may exceed 15 seconds.
In case of operational error or performance change, disconnect the product from the mains immediately and contact the supplier/manufacturer.
Disconnect from mains when not in use to reduce hazards, environmental impact, and save electricity.
Ensure sufficient ventilation around the product to avoid overheating; do not cover it.

Further Cautions and Compliance

Avoid prolonged skin contact to prevent potential allergies or injuries from moderate temperatures or plastic materials.
Read respective User Manuals for accessories and interconnected equipment.
Refer to separate pages for assembly of exchangeable output plugs.
Modular output cables (telephone connector style) must not be connected to telephone outlets.
Products with welded plastic housing or IP67 rating are not repairable; supply cord cannot be replaced. If damaged, scrap the appliance and contact supplier for replacement parts.
Contains hazardous voltages; no user-replaceable parts. Never attempt to remove the cover.
WARNING: Modifications are not allowed. Repairs/service must be done by qualified personnel.
Products with automatic polarity protection must be switched off if a battery is connected with reverse polarity; protection resets automatically upon correction.
If a fuse is used for polarity protection, replace it with the same type and rating if reverse polarity occurs.
Medical Electrical Equipment Compliance: If specified to comply with IEC60601-1 or IEC60601-1-11 (Home Healthcare Environment), it meets requirements for medical applications. For Class I products in home healthcare, permanent wiring to the building installation is required, with specific earth conductor requirements (min. 0.75 mm²).
Keep away from heat sources, flammable anesthetic gases, or explosive atmospheres.
Converts mains voltage to safety extra low voltage. Products with 2MOPP insulation (model names with "P") may contact patients (Type B or BF), but the housing must not contact the patient.

Environmental and Operational Conditions

Operating Environment: Temperature +5 to +40°C, humidity 15-93% RH, atmospheric pressure 70-106 kPa (700-1060 hPa). Wait 30 minutes after storage/transport outside this range before operating.
Expected Service Life: 3 years (if operated as indicated). Guarantee times from "TERMS OF SALES AND DELIVERY FOR MASCOT AS" apply.
Transport/Storage Parameters: Temperature -25 to +85°C, humidity 15-93% RH, atmospheric pressure 70-106 kPa.
Long-term Storage Parameters: Temperature +5 to +35°C, humidity 10-75% RH, atmospheric pressure 70-106 kPa to maintain service life.
Expected Shelf Life: 1 year (if stored as indicated).
Complies with electromagnetic compatibility requirements for medical equipment in residential, office, or light industrial environments. However, potential interference with other devices exists; disconnect and consult a technician if suspected.
Maintenance: No special procedure required. Wipe clean with a dry cloth when disconnected from mains if dusty or dirty.
Plastic Casing Care: Avoid contact with lotions, oils, grease, and solvents. Keep away from UV-light and direct sunlight.
Operate and store under foreseeable environmental conditions (magnetic fields, EM-fields, electrostatic discharges, pressure variations, acceleration).
If used in a vehicle, it must only be used when the vehicle is not in use.
Position product so the label is readable within 40 cm of the operator.
Turn off and allow to cool down before moving.

Cautions for Charging Lead-Acid Batteries

Designed for Lead-Acid batteries only.
Ensure correct charger for the battery type. Refer to specifications for minimum capacity.
Do not attempt to charge non-rechargeable batteries.
Check battery specifications for compatibility with the charger's maximum charge current and environmental conditions.
Contact the battery manufacturer if in doubt.
For flooded lead-acid batteries, check and top up electrolyte level with distilled water (5-10 mm over lead-plates) if necessary.
Old, sulfated batteries may have reduced capacity and charge current. They should ideally be replaced.
Charging can produce explosive gases; ensure a well-ventilated area and avoid sparks and open flames.
Disconnect the charger from the mains before connecting to the battery to avoid sparks.
Ensure correct polarity when connecting to battery terminals. Reverse polarity may blow a fuse or render the charger useless.
When charging non-vehicle batteries, connect the charger to the mains before connecting to the battery to minimize sparks. Ensure terminals are not short-circuited and polarity is correct.
If using battery clips: connect RED clip to positive battery pole, then BLACK clip to negative battery pole.
For vehicle batteries: connect RED clip to positive battery pole (not connected to chassis), then BLACK clip to the vehicle chassis, away from the battery and fuel system.
The charge cycle begins when the charger is connected to the mains.
If disconnected during a charge cycle, the charger will restart a new cycle upon reconnection.
When charging is complete, disconnect the charger from the mains before disconnecting battery connections. For clips: disconnect positive first, then negative/chassis.
Battery Capacity Recommendations: Consult datasheets. Typical C/5 charge current for Lead Acid cells is used (e.g., 10Ah battery max 2A charge current). Max capacity is often 50x charge current.

Connecting Plugs and Mounting

How to connect exchangeable DC-output plugs:

1. Polarity is clearly marked on both plug ends.

2. The female plug is also marked on each side to identify polarity when connected.

3. The center polarity of the plug is shown.

How to connect exchangeable AC-plugs:

Available AC plugs:

EURO: 250V 2.5A (EN50075/IEC83 C5 II)
US: 125V 2.5A (NEMA 1-15 / CSA-C22.2 No.42)
UK: 250V 2.5A (BS 1363)
AUS: 250V 2.5A (AS/NZS 3112)

Mains Cord Set available on request for "DeskTop" configuration.

Mounting and use for bracket Mascot, part no. 205800:

Wall mount: Fix bracket to wall using suitable screws (head diameter: 8-9.5 mm, head height: max. 3 mm; thread diameter: 4-5.5 mm, thread length: min. 16 mm). Use one screw per oval opening (four total).

Place charger centered on bracket, aligning bottom housing slot with bracket tabs.

Push down on "Push" handle while pushing product against wall. Release to lock.

To release: Push down "Push" handle while pulling product away from wall.

If not wall-mounted, the bracket can be used as a handle following the same procedure.

Explanation of Lead-Acid Charge Cycle

(See tables for methods for each charger model)

Charging Method A

STEP 1 - BOOST CHARGE: Connect charger to mains. Constant current mode, max indicated current. LED: ORANGE. Rapid charging until 80-95% capacity.
STEP 2 - TOP-UP CHARGE: Constant voltage mode, decreasing current. LED: ORANGE. Battery reaches full capacity.
STEP 3 - FLOAT CHARGE: LED: GREEN. Battery fully charged, standby mode. Charger can remain connected. Will restart boost if battery is used.

Diagram: A

Shows Charge Current and Charge Voltage curves over three steps (Boost, Top-up, Float). LED indicators are ORANGE for Steps 1 & 2, GREEN for Step 3. Cut-Off Current is indicated.

Charging Method B

STEP 1 - BOOST CHARGE: Connect charger to mains. Constant current mode, max indicated current. LED: ORANGE.
STEP 2 - TOP-UP CHARGE: Constant voltage mode, decreasing current. LED turns YELLOW. Battery reaches 90-95% capacity when LED changes. Continues until charge termination level.
STEP 3 - FLOAT CHARGE: LED: GREEN. Battery fully charged, standby mode. Charger can remain connected.

Diagram: B

Shows Charge Current and Charge Voltage curves over three steps (Boost, Top-up, Float). LED indicators are ORANGE for Step 1, YELLOW for Step 2, GREEN for Step 3. Cut-Off Current is indicated.

Charging Method C

STEP 1 - BOOST CHARGE: Connect charger to mains. Constant current mode, max indicated current. LED: ORANGE (or RED 9640). Rapid charging until 80-95% capacity.
STEP 2 - TIMER CHARGE: Constant voltage mode, decreasing current. LED: YELLOW. Timer mode active until interval completion. Battery reaches full capacity.
STEP 3 - FLOAT CHARGE: LED: GREEN. Battery fully charged, standby mode. Charger can remain connected.

Diagram: C

Shows Charge Current and Charge Voltage curves over three steps (Boost, Timer, Float). LED indicators are ORANGE for Step 1, YELLOW for Step 2, GREEN for Step 3. Cut-Off Current is indicated.

Charging Method D

STEP 1 - BOOST CHARGE: LED: YELLOW. Constant current mode (CC) until Top-Up level.
STEP 2 - TOP-UP CHARGE: Constant voltage mode. LED: FLASHING YELLOW. Continues until charge termination level or timer runs out. Battery reaches full capacity.
STEP 3 - FLOAT CHARGE: LED: GREEN. Battery fully charged, standby mode. Charger can remain connected.
BATTERY NOT CONNECTED: Indicated by FLASHING GREEN LED.

Diagram: D/E

Shows Battery Voltage and Charge Current curves over steps (Step 0: Start Timer, Step 1: Boost Charge, Step 2: Top Up Charge, Step 3: Float Charge). LED indicators are YELLOW, FLASHING YELLOW, and GREEN. Includes indications for Low Current Start-Up, Error Mode, and Safety Timer.

Charging Method E

STEP 1 - BOOST CHARGE: LED: YELLOW. Constant current mode (CC) until Top-Up level.
STEP 2 - TOP-UP CHARGE: Constant voltage mode. LED: FLASHING YELLOW. Continues until charge termination level or timer runs out. Battery reaches full capacity.
STEP 3 - FLOAT CHARGE: LED: GREEN. Battery fully charged, standby mode. Charger can remain connected.
BATTERY NOT CONNECTED: Indicated by FLASHING GREEN LED.
WAIT MODE INDICATIONS: Yellow with 1 red blink (Battery temp too low), Yellow with 2 red blinks (Battery temp too high).
ERROR INDICATIONS: 2 red blinks (Wrong polarity), 3 red blinks (Output shorted), 4 red blinks (Battery voltage low), 5 red blinks (Timeout Safety timer), 6 red blinks (Defect battery), 7 red blinks (Warm error/temp too high), 8 red blinks (Thermistor error), LED off (Battery voltage too high).

Electromagnetic Compatibility

Products comply with EMC EN60601-1-2 standard for medical devices, suitable for Domestic, Residential, Office, and Hospital environments. Special precautions may be needed in areas with high EM disturbances.

Warnings:

Avoid adjacent or stacked use with other equipment to prevent improper operation.
Using unauthorized accessories may increase emissions or decrease immunity.
Keep portable RF communications equipment at least 30 cm (12 inches) away.

Guidance and Manufacturer's Declaration:

Products are intended for the specified electromagnetic environment. Ensure usage within this environment.

Test / Standard	Compliance level	Guidance
Emission: RF emissions, CISPR 11	Group 1, Class B	Suitable for all establishments, including domestic. RF emissions unlikely to cause interference; maintain 30 cm separation distance.
Harmonic emissions, IEC 61000-3-2	-	-
Voltage fluctuations / flicker emissions, IEC 61000-3-3	-	-

Immunity:

Test / Standard	Compliance level	Guidance
Electrostatic discharge (ESD), IEC 61000-4-2	± 8 kV contact, ± 15 kV air	Temporary loss of function may occur; product expected to recover.
Electrostatic fast transient / burst, IEC 61000-4-4	± 2 kV for AC-power lines, ± 1 kV for output lines	Temporary loss of function may occur; product expected to recover.
Surge, IEC 61000-4-5	± 1 kV line to line, ± 2 kV line to earth (if applicable)	Temporary loss of function may occur; product expected to recover.
Voltage dips, short interruptions and voltage variations on power supply lines, IEC 61000-4-11	<5% U_T (0.5 cycle), 40% U_T (5 cycles), 70% U_T (25 cycles), <5% U_T for 5 s (U_T = AC Input Voltage prior to test)	Temporary loss of function may occur; product expected to recover.
Power frequency magnetic field IEC 61000-4-8	3 A/m (50/60 Hz)	Not applicable for non-magnetic field sensitive devices.
Conducted RF, IEC 61000-4-6	3 Vrms, 150 kHz to 80 MHz	Temporary loss of function may occur; product expected to recover.
Radiated RF, IEC 61000-4-3	3V/m for Professional healthcare environment. 10 V/m for Home Healthcare environment. 80 MHz to 2.7 GHz	Temporary loss of function may occur; product expected to recover.

Note on Electromagnetic Propagation: Guidelines may vary. Field strengths are affected by surroundings. For fixed RF transmitters, an EM site survey may be considered. If measured field strength exceeds compliance levels, observe product for normal operation; re-orienting or relocating may be necessary if abnormal performance occurs.

Technical Data

Charge diagram A

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	2240(P) 2241(P) 50-60Hz max. 0.35A	Orange CC ch.: Orange CV ch.: Green Float ch.: Rec. batt. capacity:	1.3A <7.35V 7.35V >250mA 6.85V <250mA 6.5Ah 12.5Ah	1A <14.7V 14.7V >250mA 13.7V <250mA 5Ah 12.5Ah	0.56A <29.4V 29.4V >250mA 27.4V <250mA 2.8Ah 12.5Ah	0.35A <44.1V 44.1V >150mA 41.1V <150mA 1.8Ah 7.5Ah	0.27A <58.8V 58.8V >100mA 54.8V <100mA 1.4Ah 5Ah
2740 100-240Vac 50-60Hz	Orange CC ch.: Orange CV ch.: Green Float ch.: Rec. batt. capacity:	1.0A <7.35V 7.35V >200mA 6.85V <200mA 5Ah 10Ah	0.7A <14.7V 14.7V >200mA 13.7V <200mA 3.5Ah 10Ah	0.35A <29.4V 29.4V >100mA 27.4V <100mA 1.8Ah 5Ah	0.24A <44.1V 44.1V >100mA 41.1V <100mA 1.2Ah 5Ah	0.18A <58.8V 58.8V >50mA 54.8V <50mA 0.9Ah 2.5Ah

Charge diagram B

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	2541(P) 2541B(P) 2542(P) 2544 100-240Vac 50-60Hz max. 0.9A	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	2.7A < 7.35V 7.35V > 1.2A 7.35V < 1.2A 6.85V < 250mA 11Ah 12.5Ah	2.2A < 14.7V 14.7V > 1A 14.7V < 1A 13.7V < 250mA 11Ah 12.5Ah	1.2A < 29.4V 29.4V > 0.5A 29.4V < 0.5A 27.4V < 250mA 6Ah 12.5Ah	0.8A < 44.1V 44.1V > 0.4A 44.1V < 0.4A 41.1V < 250mA 4Ah 12.5Ah	0.6A < 58.8V 58.8V > 0.25A 58.8V < 0.25A 54.8V < 100mA 3Ah 5Ah
2544 10-30Vdc	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	2.7A < 7.35V 7.35V > 1.15A 7.35V < 1.15A 6.85V < 250mA 12Ah 12.5Ah	2A < 14.7V 14.7V > 0.85A 14.7V < 0.85A 13.7V < 250mA 10Ah 12.5Ah	1.2A < 29.4V 29.4V > 0.5A 29.4V < 0.5A 27.4V < 250mA 6Ah 12.5Ah	0.8A < 44.1V 44.1V > 0.4A 44.1V < 0.4A 41.1V < 250mA 4Ah 12.5Ah	0.6A < 58.8V 58.8V > 0.25A 58.8V < 0.25A 54.8V < 100mA 3Ah 5Ah

Charge diagram B (Continued)

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	3044 10-30Vdc	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	4A < 7.35V 7.35V > 2A 7.35V < 2A 6.85V < 500mA 20Ah 25Ah	4A < 14.7V 14.7V > 2A 14.7V < 2A 13.7V < 500mA 20Ah 25Ah	2A < 29.4V 29.4V > 0.85A 29.4V < 0.85A 27.6V < 250mA 10Ah 12.5Ah	1.5A < 44.1V 44.1V > 0.7A 44.1V < 0.7A 41.4V < 250mA 7.5Ah 12.5Ah	1A < 58.8V 58.8V > 0.5A 58.8V < 0.5A 54.8V < 250mA 5Ah 12.5Ah
2641 per channel 100-240Vac 50-60Hz	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	2.7A < 7.35V 7.35V > 1.15A 7.35V < 1.15A 6.85V < 500mA 13.5Ah 25Ah	2A < 14.7V 14.7V > 0.8A 14.7V < 0.85 13.7V < 250mA 10Ah 12.5Ah	1.0A < 29.4V 29.4V > 0.4A 29.4V < 0.4A 27.4V < 250mA 5Ah 12.5Ah	0.6A < 44.1V 44.1V > 0.35A 44.1V < 0.35A 41.1V < 250mA 3Ah 12.5Ah	0.5A < 58.8V 58.8V > 0.35A 58.8V < 0.35A 54.8V < 250mA 2.5Ah 12.5Ah
2840(P) 2840B(P) 3140(P) 220-240Vac 50-60Hz	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	8.5A < 7.35V 7.35V > 4.25A 7.35V < 4.25A 6.85V < 1.6A 42.5Ah 80Ah	7A < 14.7V 14.7V > 3.5A 14.7V < 3.5A 13.7V < 1.6A 35Ah 80Ah	3.5A < 29.4V 29.4V > 1.7A 29.4V < 1.7A 27.4V < 0.8A 17.5Ah 40Ah	2.3A < 44.1V 44.1V > 1.1A 44.1V < 1.1A 41.1V < 0.5A 11.5 25Ah	1.7A < 58.8V 58.8V > 0.9A 58.8V < 0.9A 54.8V < 0.4A 8.5Ah 20Ah
3240(P) 3240B(P) 110-120Vac/ 220-240Vac 50-60Hz	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	8.5A < 7.35V 7.35V > 4.25A 7.35V < 4.25A 6.85V < 1.6A 42.5Ah 80Ah	7A < 14.7V 14.7V > 3.5A 14.7V < 3.5A 13.7V < 1.6A 35Ah 80Ah	3.5A < 29.4V 29.4V > 1.7A 29.4V < 1.7A 27.4V < 0.8A 17.5Ah 40Ah	2.3A < 44.1V 44.1V > 1.1A 44.1V < 1.1A 41.1V < 0.5A 11.5 25Ah	1.7A < 58.8V 58.8V > 0.9A 58.8V < 0.9A 54.8V < 0.4A 8.5Ah 20Ah
3340 220-240Vac 50-60Hz	Orange CC ch.: Orange CV ch.: Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	N.A.	N.A.	N.A.	15A < 44.1V 44.1V > 8A 44.1V < 8A 41.1V < 5A 75Ah 250Ah	11A < 58.8V 58.8V > 6A 58.8V < 6A 54.8V < 4A 55Ah 200Ah

Charge diagram C

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	9640 9641 220-240Vac (115Vac) 50-60Hz	Red/Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	2.7A < 7.35V 7.35V < 2.7A (2h) 6.9V 13.5Ah 135Ah	2.7A < 14.7V 14.7V < 2.7A (2h) 13.8V 13.5Ah 135Ah	1.5A < 29.5V 29.5V < 1.5A (2h) 27.6V 7.5Ah 75Ah	1.0A < 44.1V 44.1V < 1A (2h) 41.1V 5Ah 50Ah	N.A.
9940 9941 100-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	N.A.	2.3A < 14.7V 14.7V < 2.3A (2h) 13.8V 11.5Ah 115Ah	1.3A < 29.5V 29.5V < 1.3A (2h) 27.6V 6.5Ah 65Ah	0.9A < 44.1V 44.1V < 0.9A (2h) 41.4V 4.5Ah 45Ah	N.A.
2040(P) 2041(P) 2042(P) 2140(P) 100-240Vac 50-60Hz max. 1.2A	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	N.A.	4A < 14.7V 14.7V < 4A (2h) 13.8V 20Ah 200Ah	2A < 29.5V 29.5V < 2A (2h) 27.6V 10Ah 100Ah	1.4A < 44.1V 44.1V < 1.4A (2h) 41.4V 7Ah 70Ah	1A < 58.8V 58.8V < 1A (4h) 54.8V 5Ah 50Ah
9840 220-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	5A < 7.35V 7.35V < 5A (2h) 6.85V 25Ah 250Ah	5A < 14.7V 14.7V < 5A (2h) 13.7V 25Ah 250Ah	2.5A < 29.4V 29.4V < 2A (2h) 27.4V 12.5Ah 125Ah	1.7A < 44.1V 44.1V < 1.7A (2h) 41.1V 8.5Ah 85Ah	1.3A < 58.8V 58.8V < 1.3A (4h) 54.8V 6.5Ah 65Ah
2047 9740 220-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	10A <7.35V 7.35V <10A (4h) 6.85V 50Ah 500Ah	10A < 14.7V 14.7V < 10A (4h) 13.7V 50Ah 500Ah	5A < 29.4V 29.4V < 5A (4h) 27.4V 25Ah 250Ah	3.3A < 44.1V 44.1V < 5A (4h) 40.8V 16.5Ah 165Ah	2.5A < 58.8V 58.8V < 2.5A (4h) 54.8V 12.5Ah - 125Ah
9740 115Vac 50-60Hz	Red/Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	2.0A < 14.7V 14.7V < 2.0A (4h) 13.7V 10Ah 100Ah	1.0A < 29.4V 29.4V<1.0A (4h) 27.4V 5Ah 50Ah 6.8Ah 68Ah	N.A.	N.A.	N.A.
4049 100-240Vac 50-60Hz	Red/Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	N.A.	N.A.	N.A.	N.A.	N.A.

Charge diagram C (Continued)

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	2043 100-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	10A < 7.35V 7.35V < 10A (4h) 6.85V 50Ah 500Ah	10A < 14.7V 14.7V < 10A (4h) 13.7V 50Ah 500Ah	5A < 29.4V 29.4V < 5A (4h) 27.4V 25Ah 250Ah	3.3A < 44.1V 44.1V < 3.3A (4h) 40.8V 16.5Ah 165Ah	2.5A < 58.8V 58.8V < 2.5A (4h) 54.8V 12.5Ah - 125Ah
2044 2045 220-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	20/25A < 7.35V 7.35V < 20A/25A (4h) 6.85V 100Ah 1000Ah	20A/25A < 14.7V 14.7V < 20A/25A (4h) 13.7V 100Ah 1000Ah	10A < 29.4V 29.4V < 10A (4h) 27.4V 50Ah 500Ah	6.7A < 44.1V 44.1V < 6.7A (4h) 41.1V 33.5Ah 335Ah	5A < 58.8V 58.8V < 5A (4h) 54.8V 25Ah 250Ah
2640 per channel 220-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	10A < 7.35V 7.35V < 10A (4h) 6.85V 50Ah -500Ah	10A < 14.7V 14.7V < 10A (4h) 13.7V 50Ah -500Ah	5A < 29.4V 29.4V < 5A (4h) 27.4V 25Ah 250Ah	3.3A < 44.1V 44.1V < 3.3A (4h) 41.1V 16.5Ah 165Ah	2.5A < 58.8V 58.8V < 2.5A (4h) 54.8V 12.5Ah - 25Ah
9541 per channel 220-240Vac 50-60Hz	Orange CC ch.: Yellow Timer CV ch.: Green Float ch.: Rec. batt. capacity:	25A < 7.35V 7.35V < 25A (4h) 6.85V 125Ah - 1250Ah	25A < 14.7V 14.7V < 25A (4h) 13.7V 125Ah-1250Ah	10A < 29.4V 29.4V < 10A (4h) 27.4V 50Ah 500Ah	6.7A < 44.1V 44.1V < 6.7A (4h) 41.1V 33.5Ah - 335Ah	5A < 58.8V 58.8V < 5A (4h) 54.8V 25Ah - 250Ah

Charge diagram D

Input voltage	Charge LED indicator	6V	12V	24V	36V	48V
Input voltage	Charge LED indicator	2745 115Vac/ 230Vac 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	20A < 7.35V 7.35V 2.5 20A,<4h 6.85V 0 20A 100Ah 1000Ah	20A < 14.7V 14.7V 2.5 20A,<4h 13.7V 0 20A 100Ah 1000Ah	10A < 29.4V 29.4V 1.4 10A,<4h 27.4V 0 10A 50Ah 500Ah	6.7A < 44.1V 44.1V 1 6.7A,<4h 41.1V 0 6.7A 33.5Ah 335Ah	5A <58.8V 58.8V 0.7 5A <4h 54.8V 0 5A 25Ah 250Ah
2944 2945 220-240Vac 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	20A < 7.35V 7.35V 2.5 20A,<4h 6.85V 0 20A 100Ah 1000Ah	20/25A < 14.7V 14.7V 2.5 20A,<4h 13.7V 0 20A 100Ah 1000Ah	10A < 29.4V 29.4V 1.4 10A,<4h 27.4V 0 10A 50Ah 500Ah	6.7A < 44.1V 44.1V 1 6.7A,<4h 41.1V 0 6.7A 33.5Ah 335Ah	5A < 58.8V 58.8V 0.7 5A <4h 54.8V 0 5A 25Ah 250Ah
2841 per channel 220-240Vac 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	5A < 7.35V 7.35V 1.5 5A,<4h 6.85V 0 5A 25Ah 250Ah	5A < 14.7V 14.7V 1.5 5A,<4h 13.7V 0 5A 25Ah 250Ah	2.5A < 29.4V 29.4V 0.6 2.5A,<4h 27.6V 0 2.5A 12.5Ah 125Ah	1.7A < 44.1V 44.1V 0.4 1.7A,<4h 41.1V 0 1.6A 8.5Ah 85Ah	1.2A <58.8V 58.8V 0.3 1.2A <4h 54.8V 0 1.2A 6Ah 60Ah
2245 220-240Vac (115Vac) 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	40A < 7.35V 7.35V 5 40A,<4h 6.85V 0 40A 200Ah 2000Ah	40A < 14.7V 14.7V 5 40A,<4h 13.7V 0-40A 200Ah - 2000Ah	20A < 29.4V 29.4V 2.5 20A,<4h 27.4V 0-20A 100Ah-1000Ah	N.A.	N.A.
2440(P) 2440B(P) 100-240Vac 50-60Hz max.1.6A	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	4.5A < 7.35V 7.35V 1.2 4.5A<4h 6.85V 0 4.5A 22.5Ah 225Ah	4A < 14.7V 14.7V 1.2 4A,<4h 13.7V 0 4A 20Ah 200Ah	2.5A < 29.4V 29.4V 0.6 2.5A,<4h 27.6V 0 2.5A 12.5Ah 125Ah	1.6A < 44.1V 44.1V 0.4 1.6A,<4h 41.1V 0-1.6A 8Ah 80Ah	1.2A < 58.8V 58.8V 0.3 1.2A <4h 54.8V 0 1.2A 6Ah - 60Ah

Charge diagram E

Input voltage	Charge LED indicator	6V	12V	18V	24V	36V	48V
Input voltage	Charge LED indicator	3743(P) 3743B(P) 3743T(P) 100Vac/ 240Vac 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	1.5A < 7.35V 7.35V 0.4-1.5A<4h 6.85V 0-1.5A 7.5Ah-75Ah	1A<14.7V 14.7V 0.25-1A<4h 13.7V 0-1A 5Ah-50Ah	0.56A<29.4V 29.4V 0.15-0.56A<4h 27.4V 0-0.56A 2.8Ah-28Ah	0.4A<44.1V 44.1V 0.1-0.4A<4h 41.1V 0-0.4A 2Ah-20Ah	0.3A<58.8V 58.8V 0.1-0.3A<4h 54.8V 0-0.3A 1.5Ah-15Ah
3546(P) 3546B(P) 100Vac/ 240Vac 50-60Hz	Yellow CC ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	2.7A < 7.35V 7.35V 0.5-2.7A<4h 6.85V 0-2.7A 13.5Ah-135Ah	2A < 14.7V 14.7V 0.5-2A<4h 13.7V 0-2A 10Ah- 100Ah	1.3A<22.05V 22.05V 0.3-1.3A<4h 20.5V 0-1.3A 6.5Ah-65Ah	1A<29.4V 29.4V 0.25-1A<4h 27.4V 0-1A 5Ah-50Ah	0.65A<44.1V 44.1V 0.15-0.65A<4h 41.1V 0-0.65A 3.25Ah-32.5Ah	0.5A<58.8V 58.8V 0.12-0.5A<4h 54.8V 0-0.5A 2.5Ah-25Ah
* 3540(P) * 3540B(P) 220240Vac 50Hz Max. 2.4A	Yellow CC ch.: Yellow CV ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	20A < 7.35V 7.35V>15.5A 7.35V <15.5A<4h 6.85V 0-18A 100Ah 1000Ah	20A < 14.7V 14.7V>14.5A 14.7V <14.5A<4h 13.7V 0 18A 100Ah 1000Ah	13.2A < 22.05V 22.05 V>10.5 A 22.05 V <9.0A<4h 20.55V 0 11A 66Ah 660Ah	10A < 29.4V 29.4V>8.0A 29.4V <8.0A<4h 27.4V 0 8.5A 50Ah 500Ah	6.6A < 44.1V 44.1V>5.5A 44.1V <5.5A<4h 41.1V 0-5.7A 33Ah 330Ah	5A < 58.8V 58.8V>3.5A 58.8V <3.5A<4h 54.8V 0-4.3A 25Ah 250Ah
* 3540(P) * 3540B(P) 115Vac 50-60Hz Max 4.3A	Yellow CC ch.: Yellow CV ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	20A < 7.35V 7.35V>14.5A 7.35V <14.5A<4h 6.85V 0-15A 100Ah 1000Ah	17A < 14.7V 14.7V>14.5A 14.7V <14.5A<4h 13.7V 0 15A 85Ah 850Ah	11.3A < 22.05V 22.05V>9.0A 22.05V <9.0A<4h 22.55V 0 9.5A 56.5Ah-565Ah	8.5A < 29.4V 29.4V>7.0A 29.4V <7.0A<4h 27.4V 0 7.5A 42.5Ah 425Ah	5.7A < 44.1V 44.1V>4.5A 44.1V <4.5A<4h 41.1V 0-4.7A 28.5Ah 285Ah	4.3A < 58.8V 58.8V>3.5A 58.8V <3.5A<4h 54.8V 0-3.6A 21.5Ah 230Ah
* 4040(P) * 4040B(P) 100Vac/ 240Vac 50-60Hz Max. 1.6A	Yellow CC ch.: Yellow CV ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	10A < 7.35V 7.35V > 7A 7.35V < 7A<4h 6.85V 0-10A 50Ah-500Ah	8.0A < 14.7V 14.7V > 5.5A 14.7V < 75.57A<4h 13.7V 0-8.0A 40Ah-400Ah	5.3A < 22.05V 22.05V >3.7A 22.05V <3.7A<4h 20.55V 0 5.3A 26.5Ah 265Ah	4A < 29.4V 29.4V>2.8A 29.4V <2.8A<4h 27.4V 0 4.0A 20Ah 200Ah	2.6A < 44.1V 44.1V>1.8A 44.1V <1.8A<4h 41.1V 0-2.6A 13Ah 130Ah	2.0A < 58.8V 58.8V>1.4A 58.8V <1.4A<4h 54.8V 0-2.0A 10Ah - 100Ah
* 4340(P) * 4340B(P) 100Vac/ 240Vac 50-60Hz Max. 1.6A	Yellow CC ch.: Yellow CV ch.: Flash Yellow CV ch.: Green Float ch.: Rec. batt. capacity:	8.0A < 7.35V 7.35V>5.6A 7.35V <5.6A<4h 6.85V 0-8.0A 40Ah - 400Ah	5.4A < 14.7V 14.7V >3.8A 14.7V <3.8A<4h 13.7V 0 5.4A 27Ah 270Ah	3.6A < 22.05V 22.05V >2.5A 22.05V <2.5A<4h 20.55V 0 3.6A 18Ah 180Ah	2.7A < 29.4V 29.4V>2.0A 29.4V <2.0A<4h 27.4V 0 2.7A 13.5Ah 135Ah	1.8A < 44.1V 44.1V>1.4A 44.1V <1.4A<4h 41.1V 0-1.8A 9Ah 90Ah	1.35A < 58.8V 58.8V>1.0A 58.8V <1.0A<4h 54.8V 0-1.35A 6.8Ah 68Ah

	Mascot Battery Charger User Manual: Comprehensive Guide to Lead Acid Battery Charging This user manual from Mascot Electronics AS provides detailed instructions for operating and maintaining their lead-acid battery chargers. It covers safety guidelines, various charging methods (A-E), technical specifications, and electromagnetic compatibility information for a range of models. Available in English, German, and French.
	Mascot Li-Ion Battery Charger User Manual Comprehensive user manual for Mascot Li-Ion battery chargers, covering safety instructions, operating precautions, charging methods, technical specifications, and electromagnetic compatibility.
	MASCOT Li-Ion Battery Charger User Manual \| Safety, Operation & Specifications Comprehensive user manual for MASCOT Li-Ion battery chargers. Covers safety instructions, operating procedures, charging methods (A, B, C, D), technical specifications, and electromagnetic compatibility for various models.
	Mascot 4099 Configuration Toolkit for Lead Acid Battery Chargers Discover the Mascot 4099 Configuration Toolkit for optimizing Mascot Lead Acid battery chargers. This comprehensive toolkit includes a CBC module, USB cable, and PC software, enabling 22 parameter settings and 7 enable/disable functions for enhanced battery performance.
	Mascot 4099 Configuration Toolkit for NiMH Battery Chargers Detailed guide to the Mascot 4099 Configuration Toolkit for NiMH battery chargers, including key parameters, End of Charge methods, setup instructions, and included components. Learn how to optimize battery performance.
	Mascot 4099 Configuration Toolkit for LiFePO4 Battery Chargers Optimize Mascot LiFePO4 battery performance with the 4099 Configuration Toolkit. This kit includes a CBC module, software, and cables for 21 parameter settings and 8 functions. Details setup, components, and ordering information.
	EU Declaration of Conformity - MASCOT® Safe Classic T-shirt EU Declaration of Conformity for the MASCOT® Safe Classic T-shirt (18281-995-222), detailing its compliance with EU regulations and harmonized standards.
	Mascot Power Supplies User Manual Comprehensive user manual for Mascot power supplies, detailing safety instructions, operating procedures, technical specifications, and electromagnetic compatibility. Available in multiple languages.