Truck Guardian Wired

Product Overview

The Midland Truck Guardian Wired is a professional, cable-connected surveillance system designed for trucks. It provides clear visibility day and night, enhancing safety and situational awareness.

Monitor Features

• 12/24V power supply
• Full HD High resolution TFT LCD Monitor
• Image rotation, flip, or mirror options
• Full-screen camera display
• Supports up to 3 cameras
• Automatic brightness reduction
• Timed trigger function
• Automatic channel switching via trigger connection
• Remote control for full function access

Camera Features

• 110° viewing angle
• 18 IR LEDs for night vision
• IP69K certification
• Sony sensor
• Shock-proof resistant up to 4g

What's in the Box

• Monitor with sun-shade protection
• Camera with sun-shade protection
• Power and camera connection cable (for monitor)
• 20m extension cable (monitor to camera)
• Remote Control
• Monitor fixing bracket
• Allen wrench
• Double-sided tape

System Components

Monitor

The monitor features a 7" LCD screen and several control buttons:

• 1. Screen: 7" LCD display.
• 2. ON/OFF: Powers the monitor on or off.
• 3. Button: Increases volume or navigates backward in menus.
• 4. Button: Decreases volume or navigates forward in menus.
• 5. MENU (M): Accesses the settings menu.
• 6. Arrow Buttons: Select the camera view.
• 7. Speaker: For optional audio functions.

Camera

The camera unit includes:

• 1. IR LEDs: 18 infrared LEDs for night vision.
• 2. Lens: The primary optical component.
• 3. Cable: For power supply and connection to the monitor.
• 4. Mounting Bracket: For securing the camera.

Installation and Setup

Kit Setup

1. Connect the monitor and camera connectors.
2. Connect the power supply (red wire to positive +, black wire to negative -).
3. The system is now ready to display images.

Optional Camera Setup

To install additional cameras, connect them to the monitor first. Then, select the corresponding channel on the monitor to view the video feed.

Automatic Channel Switching (Trigger Function)

The monitor's power cable includes three "TRIG" wires (1, 2, 3), each corresponding to a camera channel. Connecting a TRIG wire to a positive power source (e.g., a turn signal) will automatically switch the monitor to that camera's view. When the trigger signal is removed, the monitor reverts to the previous view.

The SYSTEM → DELAY TIME menu allows setting a delay before reverting to the previous channel.

Example: 2-Channel Setup

1. Front camera for road monitoring (Channel 1).

2. Rear camera for reversing assistance (Channel 2).

Connecting TRIG[2] to the reverse gear signal will automatically display the rear camera when reversing. Upon disengaging reverse, the monitor returns to the front camera view. This function is available for all three channels.

Note: Install the display so it does not obstruct the driver's view.

Operation

Main Operations:

• Press buttons to cycle through camera views.
• Press the MENU button (M) to access and adjust settings.

Menu Navigation

Pressing the MENU button (M) reveals the following options:

• IMAGE: Adjust Brightness, Contrast, Saturation, or Reset to defaults.
• FUNCTIONS: Enable/disable guidelines (CH1, CH2, CH3 GUIDELINES) and set trigger delay times (CH1, CH2, CH3 DELAY).
• SYSTEM: Flip display orientation and enable/disable mirror view for each camera (CH1, CH2, CH3 REVERSE).
• VOLUME: Optional function for cameras with audio support.

Use the arrow buttons [↑/↓] to change values and scroll through options. Press M to exit menus.

Remote Control

The remote control provides access to all monitor functions:

• 1. Camera Select: Choose the camera to display.
• 2. Volume Down / Menu Scroll: Decrease volume or scroll down/back in menus.
• 3. Display Mode: Select monitor display mode (Day/Night 1/Night 2/User).
• 4. On/Off: Power the monitor on or off.
• 5. Volume Up / Menu Scroll: Increase volume or scroll up/forward in menus.
• 6. MENU: Open the main menu.

Troubleshooting

Technical Specifications

Monitor Specifications

Camera Specifications

Specifications are subject to change without prior notice. For firmware updates and warranty information, visit www.midlandeurope.com.

Manufacturer & Importer Information

Product produced or imported by: MIDLAND EUROPE srl, Via R. Sevardi 7, 42124 Reggio Emilia - Italy.

Distributed by: ALAN ELECTRONICS GmbH, Daimlerstraße 1K, D-63303 Dreieich, Germany.

Imported by MIDLAND IBERIA, SA, C/Cobalt, 48 - 08940 Cornellà de Llobregat, Barcelona - España.

Imported by ALAN FRANCE S.A.R.L., 14 Draille des Tribales, Bât D, Lot n°6, 13127 Vitrolles - France.

CE and RoHS Compliant.