HOMCOM Nesting Tables
Model: 839-881V00
Product Code: N230800413V01_GL
Important Information
Please read these instructions carefully before assembly. Retain for future reference.
Estimated assembly time: 0.4 Hours. Recommended steps: 5.
Tools Recommended: [Allen Key]
Note: Do not confuse similar screws. Do not tighten bolts fully until all parts are connected.
Parts List
- Part 1: Top Panel (x1)
- Part 2: Top Panel (x1)
- Part 3: Side Frame (x2)
- Part 4: Crossbar (x3)
- Part 5: Side Frame (x2)
- Part 6: Crossbar (x4)
Hardware List
- Hardware A: M6*32mm Screws (x8, 1 spare)
- Hardware B: M6*35mm Screws (x14, 1 spare)
- Hardware C: Allen Key (x1)
Assembly Steps
Step 1
Assemble the frame for the larger table. Take two Side Frames (Part 3) and connect them using three Crossbars (Part 4). Secure each connection point using Hardware B (M6*35mm screws) and the Allen Key (Hardware C). Ensure all connections are firm but not fully tightened yet.
- Hardware Used: B (x6), C (x1)
Step 2
Attach the larger Top Panel (Part 1) to the assembled frame. Align the pre-drilled holes on the underside of the panel with the top of the Side Frames (Part 3). Secure the panel using Hardware A (M6*32mm screws). Now, go back and fully tighten all previously installed Hardware B screws.
- Hardware Used: A (x4)
Step 3
Assemble the frame for the smaller table. Take two Side Frames (Part 5) and connect them using four Crossbars (Part 6). Secure each connection point using Hardware B (M6*35mm screws). Ensure all connections are firm but not fully tightened yet.
- Hardware Used: B (x8)
Step 4
Attach the smaller Top Panel (Part 2) to the assembled frame. Align the pre-drilled holes on the underside of the panel with the top of the Side Frames (Part 5). Secure the panel using Hardware A (M6*32mm screws). Fully tighten all Hardware B screws from the previous step.
- Hardware Used: A (x4)
Step 5
The assembly is now complete. You have a set of two nesting tables.
Final check: Ensure all screws are tightened securely.
Customer Support and Contact Information
For any questions or assistance, please contact the customer care center for your region:
United States (US)
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Importer: Aosom LLC, Wilsonville, OR 97070 USA. Made in China.
Canada (CA)
Phone: 416-792-6088
Email: customerservice@aosom.ca
Importer: Aosom Canada Inc., Markham, Ontario Canada L3R 4B9. Made in China.
Germany (DE)
Phone: +49 4087408465
Email: service@aosom.de
Importer: MH Handel GmbH, Hamburg, Germany. Made in China.
Italy (IT)
Phone: 0039-0249471447
Email: clienti@aosom.it
Importer: AOSOM Italy srl, Assago (MI), Italy. Made in China.
Spain (ES)
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Importer: SPANISH AOSOM, S.L., Spain. Made in China.
United Kingdom (UK)
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer: MH STAR UK LTD, Perivale, UB6 7RH, UK. Made in China.
France (FR)
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Importer: MH FRANCE, Issy Les Moulineaux, France. Made in China.
Please also consider recycling packaging: ♻️ [Recycle]
