Anker Soundcore AeroFit 2 Quick Start Guide

How to Pair

First-Time Pairing:

1. Open the charging case; the earbuds will automatically power on and enter pairing mode.

2. Select "soundcore AeroFit 2" on your device's Bluetooth list to connect.

Manual Pairing:

Open the charging case, and without taking out the earbuds, press and hold the case's power button for 3 seconds to enter pairing mode.

Touch Controls

Use the soundcore app to activate, disable, or customize controls for volume adjustment and voice assistant.

Dual Earbuds Controls:

• Play/Pause Audio: Double tap (Right earbud)
• Play Next Track: Double tap (Left earbud)
• Answer/End Call: Double tap (Left/Right earbud)
• Reject Call: Tap and hold for 2 seconds (Left/Right earbud)
• Customize Volume/Voice Assistant: Use the soundcore app

Single Earbud Controls:

• Play/Pause Audio: Double tap
• Answer/End Call: Double tap
• Reject Call: Tap and hold for 2 seconds
• Customize Volume/Voice Assistant: Use the soundcore app

You can personalize touch control actions in the soundcore app by navigating to 'Controls' on the home page.

How to Wear

Adjust the ear hooks between four levels (LV1, LV2, LV3, LV4) to find the most comfortable and secure fit for the best listening experience.

• LV1 and LV2: Best for small to medium-sized ears.
• LV2 to LV4: More comfortable for medium to large-sized ears.

Ear Hook Position Guide:

Ensure the ear hook is positioned correctly for a secure fit. The correct fit is indicated by a checkmark (✔️), while incorrect fits are marked with crosses (❌).

How to Clean

After each use, wipe the earbuds with a soft, dry cloth. Clean the charging contacts with a cotton swab to prevent charging and power-off issues caused by sweat accumulation.

Sound Effects

Download the soundcore app to adjust EQ settings, experience Gaming Mode, customize touch controls, and update firmware.

The app offers 22 EQ presets for different scenarios, including "soundcore Signature" (the default), Acoustic, Bass Booster, Classical, Podcast, Dance, Deep, Electronic, Flat, Hip-hop, and more. You can also create a custom sound profile using the "Custom Equalizer" with eight adjustable sliders.

Charging

1. Place the earbuds in the charging case and close it. Ensure the earbuds and charging port are dry.

2. Connect the charging case to a power supply using the provided USB-C charging cable, or place the charging case on a wireless charger.

• Wired charging: Approximately 1.7 hours to fully charge the case; 2.2 hours to fully charge the case and earbuds.
• Wireless charging: Approximately 2.6 hours to fully charge the case and earbuds.

Checking the Battery Level:

When the charging case is opened, the LED light strip indicates the remaining battery level:

• Red light: Less than 20%
• Yellow light: 20% - 50%
• Green light: 50% - 100%

Checking the Charging Status:

When connected to a power source, the LED light strip displays the charging status.

Powering Off

Return both earbuds to the charging case and close the case. The earbuds will automatically power off after 30 minutes if not connected (this duration can be customized in the soundcore app).

Reset

Reset the earbuds if they have issues pairing with each other or with other devices.

1. Return the earbuds to the charging case and leave the case open.

2. Press and hold the charging case button for 10 seconds until the LED light strip flashes white quickly three times, indicating a successful reset.

Firmware Update

You will be notified in the soundcore app when a new firmware version is detected. Ensure the earbuds are in the charging case with the case open until the update is complete. Do not use the earbuds during the update.

Specifications

Customer Service

For support, please visit: support.soundcore.com

Contact Information:

• Email: service@soundcore.com, support.mea@soundcore.com (Middle East and Africa), support@anker.com (Japan)
• Phone: +1 (800) 9887973 (US/Canada), +44 (0) 1604936200 (UK), +49 (0) 6995797960 (DE), 0344557823 (Japan), +864000550036 (China), +82 1666-8470 (Korea), +971 8000320817 (UAE), +966 8008500030 (KSA), +965 22069086 (Kuwait), +20 8000000826 (Egypt), +61383314800 (Australia), +90 (850) 4601414 (Türkiye), +8 (800) 511-86-23 (Russia), 000-8000-504-414 (India)

Important Safety Instructions

• Do not disassemble.
• Keep out of reach of children. Contains small parts that may be a choking hazard.
• Do not expose the battery to excessive heat (sunshine, fire, etc.).
• Avoid using in extreme temperatures or environments with high humidity.
• Ensure the charging port is dry before charging.
• Maintain a minimum distance of 20 cm between the radiator and body during wireless charging.
• Refer to the user manual for specific waterproof levels (IPX4, IPX5, IPX6) and follow instructions. Do not expose to dripping/splashing water or submerge.

Hearing Safety:

• Avoid listening at high volumes for extended periods to prevent hearing damage.
• Do not set volume so high that you cannot hear your surroundings.
• Do not use while driving.
• Exercise caution or discontinue use in potentially hazardous situations.

The product contains magnets. Maintain a distance of at least 10 cm (3.94 inches) between the earbuds/charging case and pacemakers, ICDs, or other implants.

Notice & Declaration of Conformity

This product complies with the radio interference requirements of the European Community and The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.

EU Declaration of Conformity:

Maximum output power: 10.8 dBm

Frequency band: 2.4 G band (2.402 GHz - 2.480 GHz)

Wireless Power Transfer (WPT):

Operate Frequency: 110 KHz - 205 KHz

H-Field Strength: -3.82 dBuA/m @10m

Data Communication: 135.10 KHz

Full EU Declaration of Conformity available at: https://support.soundcore.com/s/articleRecommend?type=DownLoad&secondType=doc

UK Statement of Compliance:

For Statement of Compliance, visit: https://uk.soundcore.com/pages/psti-related

Recycling and Disposal

This symbol indicates the product and its batteries must not be discarded as household waste. Deliver to an appropriate collection facility for recycling. Follow local rules. Proper disposal prevents negative environmental and health consequences.

Battery Safety:

• Danger of explosion if battery is incorrectly replaced.
• Do not disassemble, crush, puncture, short external contacts, expose to temperatures above 60°C (140°F), or dispose of in fire or water.
• Replace only with specified batteries.
• Operating temperatures: Use: max 40°C (104°F); Storage: -20°C to 45°C (-4°F to 113°F); Transportation: 5°C to 35°C (41°F to 95°F).

FCC Statement

This product complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any interference received.

Warning: Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation.

Importer: Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764, USA. Phone: +1 (800) 9887973

Radiation Exposure Statement

This product complies with SAR for general population/uncontrolled exposure limits and has been tested in accordance with specified measurement methods. Maintain a minimum distance of 0 mm between the radiator and your head. The device and its antenna must not be co-located or operated with any other antenna or transmitter.

IC Notice to Canadian Users

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) no interference, and (2) acceptance of any interference.

This Class B digital apparatus complies with Canadian ICES-003.

Sustainability

This product is a better choice, meeting the criteria in TCO Certified, a comprehensive sustainability certification for IT products. TCO Certified balances environmental and social responsibility with a life-cycle perspective, verified by independent verifiers.

For more information, visit tcocertified.com.

Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Anker Innovations Limited uses these marks under license. Other trademarks and trade names are property of their respective owners.

Model Information

Model: A3874 / A3874L / A3874R

FCC ID: 2AOKB-A3874L / 2AOKB-A3874R

IC: 23451-A3874L / 23451-A3874R

Warranty

18-month limited warranty (12-month for India).