Logitech M170/M171 Wireless Mouse
Reliable wireless connectivity
Setup Guide
Setup Instructions
Step 1: Prepare the Mouse
Open the battery compartment cover by gently pulling the top part of the mouse towards the back.
Step 2: Insert Battery
Insert one AA battery into the compartment, ensuring correct polarity (+/-). Close the battery compartment cover. Ensure the On/Off switch is in the 'ON' position.
Step 3: Connect Receiver
Plug the USB Nano receiver into a USB port on your computer or laptop. The mouse will automatically connect.
Product Features
- 1. Left and right mouse buttons: Standard click functionality.
- 2. Scroll wheel: Used for scrolling. Pressing the wheel down activates the middle button, which can vary by software application.
- 3. On/Off slider switch: Located on the bottom of the mouse to conserve battery.
- 4. Battery door release: Mechanism to open the battery compartment.
- 5. USB Nano-receiver storage: A compartment on the bottom of the mouse for storing the USB receiver when not in use.
Troubleshooting: Mouse Not Working
Common Issues and Solutions
- Is the mouse powered on? Ensure the On/Off slider switch is in the 'ON' position.
- Is the Nano receiver securely plugged into a USB port? Try unplugging and replugging the receiver. If possible, try a different USB port on your computer.
- Is the Nano receiver plugged into a USB hub? If so, try plugging it directly into a USB port on your computer to rule out hub issues.
- Check the orientation of the battery inside the mouse. Ensure the battery is inserted with the correct positive (+) and negative (-) ends aligned.
- Try a different surface. Some surfaces can interfere with optical tracking. Also, remove any metallic objects between the mouse and the Nano receiver.
- For Windows® operating systems: If the mouse is still not working, try reconnecting the mouse with the Nano receiver. You can do this by launching the Logitech Connect utility from www.logitech.com/connect_utility.
