Lithonia Lighting D-Series Size 1 LED Wall Luminaire
Specifications Luminaire
Width: 13-3/4" (34.9 cm)
Depth: 10" (25.4 cm)
Height: 6-3/8" (16.2 cm)
Weight: 12 lbs (5.4 kg)
Back Box (BBW, ELCW)
Width: 13-3/4" (34.9 cm)
Depth: 4" (10.2 cm)
Height: 6-3/8" (16.2 cm)
BBW Weight: 5 lbs (2.3 kg)
ELCW Weight: 10 lbs (4.5 kg)
For 3/4" NPT side-entry conduit (BBW only)
Introduction
The D-Series Wall luminaire is a stylish, fully integrated LED solution for building-mount applications. It features a sleek, modern design and is carefully engineered to provide long-lasting, energy-efficient lighting with a variety of optical and control options for customized performance. With an expected service life of over 20 years of nighttime use and up to 74% in energy savings over comparable 250W metal halide luminaires, the D-Series Wall is a reliable, low-maintenance lighting solution that produces sites that are exceptionally illuminated.
Ordering Information
EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD
| Series | LEDs | Drive Current (mA) | Color Temperature | Distribution | Voltage | Mounting | Control Options | Other Options | Finish |
|---|---|---|---|---|---|---|---|---|---|
| DSXW1 LED | 10C (10 LEDs) 20C (20 LEDs) |
350, 530, 700, 1000 | 30K (3000K), 40K (4000K), 50K (5000K) | T2S, T2M, T3S, T3M, T4M, TFTM | MVOLT (120-277V) | Surface mounting bracket, BBW Back Box | PE (Photocontrol), DMG (0-10V Dimming), PIR (Motion Sensor), PIRH (High Mount Motion Sensor), ELCW (Emergency Battery Backup) | SF (Single Fuse), DF (Double Fuse), HS (House-side Shield), SPD (Surge Protection), BSW (Bird Spikes), WG (Wire Guard), VG (Vandal Guard) | DDBXD, DBLXD, DNAXD, DWHXD, DSSXD, DDBTXD, DBLBXD, DNATXD, DWHGXD, DSSTXD |
Notes:
- MVOLT driver operates on 120-277V (50/60 Hz).
- BBW back box ships installed on fixture.
- Photocontrol (PE) requires specific voltage options and is not available with motion sensors.
- PIR/PIRH sensors are not available with 20 LED/1000 mA configuration.
- ELCW is not compatible with conduit entry or fusing.
- Fusing options (SF, DF) are not available with ELCW.
- Some accessories (HS, BSW, WG, VG) are also available separately.
- SPD option includes a separate surge protection device.
Performance Data
Lumen Output
Lumen values are based on photometric tests (IESNA LM-79-08). Actual performance may vary based on end-user environment and application. Wattage may differ by +/- 8%.
| LEDs | Drive Current (mA) | System Watts | Dist. Type | 40K (4000K, 70 CRI) | 50K (5000K, 65 CRI) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lumens | B | U | G | LPW | Lumens | B | U | G | LPW | ||||
| 10C | 530 | 20 W | T2S | 1,724 | 1 | 0 | 1 | 86 | 1,807 | 1 | 0 | 1 | 90 |
| T2M | 1,729 | 1 | 0 | 1 | 86 | 1,812 | 1 | 0 | 1 | 91 | |||
| T3S | 1,709 | 1 | 0 | 1 | 85 | 1,792 | 1 | 0 | 1 | 90 | |||
| T3M | 1,753 | 1 | 0 | 1 | 88 | 1,838 | 1 | 0 | 1 | 92 | |||
| T4M | 1,753 | 1 | 0 | 1 | 88 | 1,837 | 1 | 0 | 1 | 92 | |||
| TFTM | 1,766 | 1 | 0 | 1 | 88 | 1,851 | 1 | 0 | 1 | 93 | |||
| 20C | 530 | 36 W | T2S | 3,545 | 1 | 0 | 1 | 98 | 3,715 | 1 | 0 | 1 | 103 |
| T2M | 3,556 | 1 | 0 | 1 | 99 | 3,727 | 1 | 0 | 1 | 104 | |||
| T3S | 3,515 | 1 | 0 | 1 | 98 | 3,685 | 1 | 0 | 1 | 102 | |||
| T3M | 3,606 | 1 | 0 | 2 | 100 | 3,779 | 1 | 0 | 2 | 105 | |||
| T4M | 3,605 | 1 | 0 | 1 | 100 | 3,779 | 1 | 0 | 1 | 105 | |||
| TFTM | 3,632 | 1 | 0 | 1 | 101 | 3,807 | 1 | 0 | 1 | 106 | |||
Lumen Ambient Temperature (LAT) Multipliers
Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F).
| Ambient | Lumen Multiplier |
|---|---|
| 0°C (32°F) | 1.02 |
| 10°C (50°F) | 1.01 |
| 20°C (68°F) | 1.00 |
| 25°C (77°F) | 1.00 |
| 30°C (86°F) | 1.00 |
| 40°C (104°F) | 0.98 |
Projected LED Lumen Maintenance
Data references extrapolated performance projections based on 10,000 hours of LED testing (IESNA LM-80-08 and projected per IESNA TM-21-11) at a 25°C ambient.
| Operating Hours | Lumen Maintenance Factor |
|---|---|
| 0 | 1.0 |
| 25,000 | 0.95 |
| 50,000 | 0.93 |
| 100,000 | 0.88 |
Electrical Load
| LEDs | Drive Current (mA) | System Watts | Current (A) @ 120V | Current (A) @ 208V | Current (A) @ 240V | Current (A) @ 277V |
|---|---|---|---|---|---|---|
| 10C | 350 | 14 W | 0.13 | 0.07 | 0.06 | 0.06 |
| 530 | 20 W | 0.19 | 0.11 | 0.09 | 0.08 | |
| 700 | 27 W | 0.25 | 0.14 | 0.13 | 0.11 | |
| 1000 | 40 W | 0.37 | 0.21 | 0.19 | 0.16 | |
| 20C | 350 | 25 W | 0.23 | 0.13 | 0.12 | 0.10 |
| 530 | 36 W | 0.33 | 0.19 | 0.17 | 0.14 | |
| 700 | 47 W | 0.44 | 0.25 | 0.22 | 0.19 | |
| 1000 | 75 W | 0.69 | 0.40 | 0.35 | 0.30 |
Photometric Diagrams
For complete photometric reports or to download .ies files, visit Lithonia Lighting's D-Series Wall Size 1 homepage.
Isofootcandle plots for the DSXW1 LED 20C 1000 40K. Distances are in units of mounting height (15').
LEGEND: 0.1 fc, 0.5 fc, 1.0 fc
T2M Distribution:
[Diagram showing light distribution patterns. The horizontal axis represents lateral distance in units of mounting height, and the vertical axis represents vertical distance in units of mounting height. Contours represent isofootcandle levels.]
T3M Distribution:
[Diagram showing light distribution patterns.]
T3S Distribution:
[Diagram showing light distribution patterns.]
Distribution overlay comparison to 250W metal halide:
LEGEND: DSXW1, 0.5 fc; TWF2, 0.5 fc
10' W Sidewalk LLDs: TWF2 = 0.72; DSXW1 = 0.95
TWF2: 291W
DSXW1: 75W
DSXW1 LED 20C 40K 1000 T3M, TWF2 250M Pulse, 15' Mounting Ht
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life, and easy-to-install design of the D-Series Wall Size 1 make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility.
CONSTRUCTION
Two-piece die-cast aluminum housing with integral heat sink fins for optimized thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines, ensuring low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65).
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish, providing superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that withstands extreme climate changes without cracking or peeling. Available in textured and non-textured finishes.
OPTICS
Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored for building-mounted applications. Light engines are available in 3000K (80 min. CRI), 4000K (70 min. CRI), or 5000K (65 min. CRI) configurations.
ELECTRICAL
Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit board for maximum heat dissipation and long life (L88/100,000 hrs at 25°C). Class 1 electronic drivers feature a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. The SPD option includes a separate surge protection device meeting minimum Category C Low (per ANSI/IEEE C62.41.2).
INSTALLATION
Included universal mounting bracket attaches securely to any 4" round or square outlet box for quick and easy installation. Luminaire features a slotted gasket wireway and attaches to the mounting bracket via corrosion-resistant screws.
LISTINGS
CSA certified to U.S. and Canadian standards. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) qualified product. Verify specific product versions on the DLC Qualified Products List at www.designlights.org.
WARRANTY
Five-year limited warranty. Full warranty terms available at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Specifications subject to change without notice.
