Lithonia Lighting IBH30LMVOLT :: Lithonia IBH LED Low Bay :: PLATT ELECTRIC SUPPLY
FEATURES & SPECIFICATIONS INTENDED USE -- Ideal one-for-one replacement of conventional lighting systems such as HID and fluorescent. Applications include manufacturing, warehousing and other large indoor spaces with mounting heights ranging from 10' 40'. Luminaire shall be suspended a minimum 24" from ceiling. Surface mounting is not permitted. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. CONSTRUCTION -- Lightweight aluminum heat sink designed to perform at warm ambient temperatures. Due to precision thermal engineering for maximum naturally convective cooling this fixture provides lumen drop that is less than fluorescent. Fabricated steel channel provides maximum rigidity. OPTICS -- Medium distribution to meet both horizontal and vertical light level requirements. Reflectors are precision formed and painted a high reflectance white. Semi-diffuse lens is standard to provide glare control and LED protection. ELECTRICAL -- 70% lumen maintenance at 97,000 hours; predicted life of more than 100,000 hours. Thermally protected driver standard with 0-10V dimming. Wireless networking: XPointTM Wireless technology creates a mesh network to ensure communication between fixtures, sensors and wall stations facility-wide. This option provides superior lighting management capabilities including granular control, configuration and custom grouping for increased energy savings. INSTALLATION -- Suitable for suspension by chain, cable, surface-mounting bracket, hook monopoint or single (pendant) monopoint. Surface mounting not recommended without optional surface mounting bracket. To maintain high ambient listing, fixture should be mounted at a minimum plenum height of 18". LISTINGS -- CSA certified to US and Canadian safety standards. Damp location listed. Ambient operating temperatures vary please refer to chart on page 3. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified. WARRANTY -- 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. LED Low Bay IBH 9,000 through 30,000 Lumens Patent Pending ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: IBH 18000LM SD080 MD MVOLT GZ10 40K 70CRI WH IBH Series Lumens Lens Distribution Voltage GZ10 Driver Color temperature Color rendering index IBH 9000LM 9,000 lumens SD080 Semi-diffuse acrylic ND Narrow MVOLT 120-277V GZ10 0-10V dimming 40K 4000 K 12000LM 12,000 lumens L/LENS Less lens1 MD Medium HVOLT 347V-480V 50K 5000 K 15000LM 15,000 lumens 120 120V 18000LM 18,000 lumens 277 277V 24000LM 24,000 lumens 30000LM 30,000 lumens 70CRI 70 CRI 80CRI 80 CRI 2 Options GLR Internal fast-blow fuse 3,4 OUTCTR Wiring leads pulled through back center of fixture OCS RELOC® OnePass® 5' installed 3 RRL RELOC®-ready luminaire. See page 5 for ordering information WGX Standard wire guard, installed Cord sets: 5 CS1W Straight plug, 120V 3,6 CS3W Twist-lock, 120V 3,6 CS7W Straight plug, 277V 3,6 CS11W Twist-lock, 277V 3,6 CS25W Twist-lock, 347V 3,6 CS97W Twist-lock, 480V 3,6 CS93W 600V SEOOW white cord, no plug (no voltage required) Motion sensors: LCOZU Aisle motion sensor, pre-wired 3,7 LCHOSZU Aisle motion sensor, pre-wired; programmable dimming 3,7 LCPZU Aisle motion sensor with photocell; pre wired 3,7 LAC0SZU Aisle motion sensor, dimming and switching photocell, pre-wired 3,7 LAOZU 360° motion sensor, pre-wired 3,7 LAHOSZU 360° motion sensor, pre-wired; programmable dimming 3,7 LAPZU 360° motion sensor with photocell, pre-wired 3,7 MSI6XADL DSCXADL 360° Xpoint wireless motion sensor with photocell 3,13 LAM0SZU 360 motion sensor, dimming and switching photocell, pre-wired (T24 compliant)3,7 LCM0SZU Aisle motion sensor, dimming and switching photocell, pre-wired (T24 compliant)3,7 nPP16D nLight® switching/dimming module 3,8 nMSI nLight, aisle motion sensor, pre-wired 3,9 nMSI360 nLight, 360° motion sensor, pre-wired 3,10 nMSID nLight, aisle motion sensor, pre-wired, dimmng 3,11 nMSI360D nLight, 360° motion sensor, pre-wired, dimming 3,12 XPW Factory installed XPointTM wireless 0-10V dimming relay 3,13,14 Finish WH Gloss white MB Matte black INDUSTRIAL See footnotes on page 2. IBH Page 1 of 5 IBH LED Low Bay Accessories: Order as separate catalog number. Mounting: IBAC120 M20 IBAC240 M20 IBHMP ZACVH IBLPMP IBLPMPHB HC36 THUN Aircraft cable 10' with hook (one pair) Aircraft cable 20' with hook (one pair) Hook monopoint Aircraft 10' V hanger (one pair) Pendant monopoint splice box, includes side covers Pendant monopoint splice box with 3/4" hub, includes side covers Hanger chain, 36" (one pair) Tong hanger bracket (order 2 per fixture) 15 Notes 1 Direct eye exposure to the high-power LEDs can injure the eyes. Proper precautions should be taken to avoid direct prolonged and/or close-range viewing of the LEDS while operating. 2 10% reduction in lumens compared to 70 CRI. 3 Must specify voltage. 4 Not available with 347V. 5 All cord sets are 18/3, 6', white. 6 Cord sets are voltage specific. Specify voltage. Other configurations available. Consult factory. 7 Other configurations available, see page four for additional options. Maximum ambient temperature 104°F (40°C). 8 347V and 480V with nPP16D utilizes a step down transformer. Wire guards: WGIBH Wire guard for use with 9000LM - 15000LM fixtures WGIBH4 Wire guard for use with 18000LM - 30000LM fixtures 9 nMSI options utilizes a nPP16 and nCMB 50 sensor, CAT5e connector cable also included. Available 120 or 277V only. 10 nMSI360 options utilizes a nPP16 and nCMB 6 sensor, CAT5e connector cable also included. Available 120 or 277V only. 11 nMSID options utilizes a nPP16D and nCMB 50 sensor CAT5e connector cable also included. Available 120 or 277V only. 12 nMSI360D options utilizes a nPP16D and nCMB 6 sensor, CAT5e connector cable also included. Available 120 or 277V only. 13 For use in ambient temperatures ranging from -14° to 104°F (-10° to 40°C). 14 XPW option utilizes the XPA CMRB0. Must specify voltage 120-277 only. 15 For use in applications with ambient temperatures up to 30C. DIMENSIONS All dimensions are in inches (centimeters) unless otherwise indicated. Dimensions may vary with options or accessories. 4 (10.2) HUB (IBLPMPHB) OPTION IBLPMP OPTION WGIBH OPTION 5 ¼ (13.3) 2 / (6.1) 6 ¼ (15.9) 4 / (10.5) 1 / (4.8) 4-3/8 (11.1) 15-1/4 (38.7) 14 / (37.8) 15 / (39.1) (55.92)2 9,000, 12,000 and 15,000 Lumens 4-3/8 (11.1) 15-1/4 (38.7) (1114.48) 18,000, 24,000 and 30,000 Lumens IBH Page 2 of 5 IBH LED Low Bay OPERATIONAL DATA. Lumen package Ambient rating* (120V - 277V) Ambient rating* (347V / 480V) 9000LM 12000LM 15000LM 18000LM 24000LM 30000LM -40°F to 104°F (-40°C to 40°C) -40°F to 104°F (-40°C to 40°C) -40°F to 104°F (-40°C to 40°C) -40°F to 104°F (-40°C to 40°C) -40°F to 104°F (-40°C to 40°C) -40°F to 104°F (-40°C to 40°C) -40°F to 86°F (-40°C to 35°C) -40°F to 86°F (-40°C to 35°C) -40°F to 95°F (-40°C to 35°C) -40°F to 95°F (-40°C to 35°C) -40°F to 95°F (-40°C to 35°C) -40°F to 95°F (-40°C to 35°C) * Ambient temperature ratings vary depending on options selected. CHARACTERISTICS Wattage Lumen package 120V 277V 347V 480V 9000LM 99 97 95 95 12000LM 131 129 126 125 15000LM 155 152 149 148 18000LM 202 199 194 194 24000LM 257 253 247 247 30000LM 310 305 298 297 Lens option SD080 L/Lens SD080 L/Lens SD080 L/Lens SD080 L/Lens SD080 L/Lens SD080 L/Lens 70CR, 50K 10,158 10,745 14,380 15,211 16,676 17,640 21,830 23,092 26,844 28,397 33,352 35,281 70CRI, 40K 10,027 10,607 14,189 15,009 16,455 17,407 21,539 22,785 26,493 28,025 32,910 34,814 80CRI, 50K 9,746 10,310 10,798 14,596 15,994 16,919 20,947 22,159 25,761 27,251 31,998 33,849 Length Width Depth Dimensions are shown in inches (centimeters) unless otherwise noted. 22 (55.9) 22 (55.9) 22 (55.9) 44 (111.8) 44 (111.8) 44 (111.8) 15-1/4 (38.7) 15-1/4 (38.7) 15-1/4 (38.7) 15-1/4 (38.7) 15-1/4 (38.7) 15-1/4 (38.7) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) 4-3/8 (11.1) Weight without Lens (Lens kit adds approx. 7 lbs (2.3 kg) 10 lbs (4.5 kg) 10 lbs (4.5 kg) 10 lbs (4.5 kg) 20 (9.1 kg) 20 (9.1 kg) 20 (9.1 kg) PROJECTED LUMEN MAINTENANCE Operating hours Lumen maintenance factor 0 10,000 20,000 25,000 35,000 50,000 60,000 75,000 100,000 1 0.96 0.92 0.90 0.87 0.83 0.80 0.76 0.69 LUMENS VS. AMBIENT TEMPERATURE Ambient °C 0 5 10 15 20 25 30 35 40 Ambient °F 32 41 50 59 68 77 86 95 104 Lumen multiplier 1.03 1.03 1.02 1.01 1.01 1.00 .98 .89 .79 PHOTOMETRICS See www.lithonia.com. 80CRI, 40K 8,854 9,366 12,524 13,248 14,530 15,370 19,012 20,112 23,384 24,737 29,050 30,730 Comparable light source 2-lamp T5HO 4-lamp T8, 250W HID 4-lamp T5HO, 6-lamp T8 4-lamp T5HO, 6-lamp T8, 400W HID 6-lamp T5HO, 8-lamp T8 8-lamp T5HO IBH Page 3 of 5 IBH LED Low Bay LSXR Fixture Mount Sensor (see www.sensorswitch.com for additional information) · Four interchangeable lenses. · Integrated mounting bracket drops lens down 3" from chase nipple. · Single or dual relay versions -- designed with robust protection from the harsh switching requirements of T5 and LED loads. · Photocell and 0-10VDC dimming options. · No PIR field calibration or sensitivity adjustments required. LSXR configuration Comparable CMRB sensor Old style sensor nomenclature For shortest lead times use one of the following LSXR configurations LCOZU CMRB 50 MSI LCH0SZU CMRB 50 D MSID LCPZU CMRB 50 P MSIPED LAOZU CMRB 6 MSI360 LAH0SZU CMRB 6 D MSI360D LAPZU CMRB 6 P MSI360PED SINGLE RELAY ORDERING INFORMATION SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS. Lead times will vary depending on options selected. Consult with your sales representative. Example: LAH0SZU Series Lens option Dimming/Photocell Max. dim Level L LSXR passive infrared indoor occupancy sensor A High mount, 360° B Low mount, 360° C High mount aisleway O None 1 H High/low occupancy operation P Switching photocell (on/off) M Dimming and switching photocell G Dimming and switching photocell with high/low occupancy operation 0 10 VDC 9 9 VDC 8 8 VDC 7 7 VDC Min. dim level Temp/Humidity S Minimum dimming level of ballast 1 1 VDC 2 2 VDC 3 3 VDC 4 4 VDC 5 5 VDC 6 6 VDC Z None T Low temperature Default time delay I 30 seconds D 2.5 minutes X 5 minutes R 7.5 minutes U 10 minutes (with minimum 15 minutes on time) V 15 minutes W 20 minutes Y 30 minutes DUAL RELAY (Available with 120, 277, and 347V only) ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: LA2KZU Series Lens option Poles Operating mode Temp/Humidity Default time delay L LSXR passive infrared indoor occupancy sensor A High mount, 360° B Low mount, 360° C High mount aisleway 2 Dual relay J None K Alternating off relays (promotes even lamp wear) O Alternating off relays w/photocell P Switching photocell (on/off) E Photocell on/off (pole 1 only) F Photocell on/off - both poles (dual set-point) Z None T Low temperature I 30 seconds D 2.5 minutes X 5 minutes R 7.5 minutes U 10 minutes (with minimum 15 minutes on time) V 15 minutes W 20 minutes Y 30 minutes Example: LENS 50 J100 Replacement lenses: Order as separate catalog number. Series Lens type Package quantity Lens 6 High mount 360° U Unit 10 Low mount 360° J10 10-pack 50 High mount aisleway J100 100-pack Notes 1 Dimming level fields not required when this option is chosen. IBH Page 4 of 5 IBH LED Low Bay RRL RELOC®-Ready Luminaire · RRL connectors can be used with Quick-Flex®, System 820 and OnePass® systems. · Load side of connector factory installed to luminaire. · 4-pole mating connector with push-in terminations allows for simple installation. · Touch-safe design on both halves meets UL/CSA requirement. · Wiping contact design allows safe disconnect under load. ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RRLA Series Wiring instructions RRL RELOC®-ready luminaire A Hot conductor wired to position #1 (phase A) B Hot conductor wired to position #2 (phase B) C Hot conductor wired to position #3 (phase C) 1 AB Outboard hot conductor wired to position #1 (phase A), inboard hot conductor wired to position #2 (phase B) AE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to position #2 (phase B) 2 ABE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to position #2 (phase B), inverter conductor wired to position #3 (phase C) 1,2 C12S Hot conductor in position #1 (phase A), low voltage conductor #1 in position #2,low voltage conductor #2 in position #3 1,3 Compatible RELOC® Cables for Industrial Luminaires (shipped and ordered separately) OCS OCU OD Notes 1 C, ABE, and C12S options are not used with Quick-Flex QFC, QSFC, QPT, and QD. 2 AE and ABE commercial fixtures should disconnect the TSPL before unplugging the RRL so it does not go into discharge mode. 3 C12S option is used with the OnePass OD and 820 SSC, PT, and DC for 0-10V/DALI applications. DC PT IBH Page 5 of 5Adobe PDF Library 9.9