DayBetter Bluetooth LED Strip Lights User Manual

How to Connect?

1. Connect the LED Controller with the LED Light Strip.
2. Connect the LED Controller with the power supply.
3. Plug in the power supply.

Note: Please use a 5V 2A or above adapter. 5V 1A and below may cause the product to not work properly.

Power-on Test Before You Install

1. Unpack the box and check all items included.
2. Power on the strip light and check whether it lights up.

Caution: Do NOT power on before unrolling the strip light.

How to Install?

1. Stick onto a smooth, dry, clean surface (e.g., Glass, Ceramic Tile).
2. Avoid rough and dusty surfaces (e.g., Dust Wall, Frosted glass).
3. Clean the surface, dry it, and then stick the LED strip.
4. Press the entire strip light repeatedly with force for secure adhesion.

Recommended Tip: Try to bend with a bigger radian to protect the strip light and its electronic components.

Control by Button

• Turn on or turn off light
• Adjust the brightness
• Switch mode

Control by App

1. Scan the QR code on the controller to install the APP.
2. Turn on Bluetooth on your phone.
3. Open the APP, tap the '+' icon in the top right corner and search for new devices.
4. The APP will show the device found; simply add it.
5. Tap the device icon to enter the control panel and explore its features.

App Download Methods:

• Method 1: Search for "DayBetter" in the App Store/Google Play Store to download.
• Method 2: Scan the provided QR code to switch to the App Store/Google Play Store for download.

Tips and Cautions

1. Unroll the strip light before powering on.
2. Perform a power-on test before installation. The power supply must be 5V 2A.
3. Be cautious of static electricity during installation and usage.
4. Do NOT allow children to install the strip light alone.
5. Please turn off the power and unplug the adapter if the strip light will not be used for a long time.
6. Keep the product away from sharp objects or strong corrosive chemicals.
7. Please do NOT connect more strips to the product, as this will cause the power adapter to overload.
8. Adjust mic sensitivity and the distance between the sound source and the phone/device mic in Music Mode to achieve the best music synchronization.
9. It is normal for the USB head to become slightly warm.
10. Please contact DayBetter customer service if you encounter any problems or receive a defective product. Responses will be provided within 24 hours.

Troubleshooting

1. App cannot discover the device:

1. Check if the device is powered on.
2. Ensure the app is the latest version. Older versions may not detect new models.
3. Make sure the device and phone are within a 6 ft (approx. 1.8 meters) distance.
4. On the 'add device' page, wait up to 10 seconds for the device to appear.
5. Ensure the phone's Bluetooth is on and all required permissions are granted.
6. Power off the device, close the app, reopen the app, power on the device, and try connecting again.
7. Disable and then re-enable the phone's Bluetooth, then attempt to connect again.
8. Your phone might be incompatible with the app; try using a different phone.

If the issue persists, please contact customer support or the seller.

Customer Service

For any questions or product issues, please contact the seller via the email provided on the packaging or obtain product support from the order page in your purchasing account. All inquiries will be answered within 24 hours.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.