Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate
3090 Founders Edition
Alphacool article number: 13039
Quick Info
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate is an ideal upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers, specifically for GeForce RTX 3080/3090 graphics cards. This backplate, constructed from nickel-plated copper, allows for active water cooling of the rear side of the graphics card, significantly boosting cooling performance.
- Nickel-plated copper cooler
- Addressable digital RGB LEDs
- Extreme cooling performance
Compatibility
- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 Founders Edition with backplate (article number: 11941)
Scope of Delivery
- 1x 15x15x1mm thermal pad
- 2x 15x51x1mm thermal pad
- 1x 15x38x1mm thermal pad
- 1x 30x30x2mm thermal pad
- 1x 8x74x3mm thermal pad
- 1x 8x84x3mm thermal pad
- 5x M2x11 screws
- 2x screw plugs
- 2x MCX fitting plugs
- 1x Plug Tool
Technical Data
| Dimensions (L x W x H) | 206.54 x 120.71 x 13.3 mm |
| Material backplate | Copper, nickel-plated |
| Material cooler | Acrylic |
| Threads Water cooling | 2x G1/4" | 2x 5/3mm tube connection |
| Illumination | 6x digital addressable RGB LEDs |
| Power connector digital aRGB LEDs | 3-pin JST (male & female switch) |
| Power digital aRGB LEDs | 5V |
| Maximum working temperature | 60 °C |
| Pressure tested | 0.8 Bar |
| Weight | 704 g |
Download Links
Packaging Dimensions per Unit
| Dimensions (L x W x H) | 350 x 170 x 40 mm |
| Weight | 965 g |
Other Data
| Certificates | CE, FC, RoHS |
| EAN | 4250197130394 |
| Customs code | 84195080900 |
Article Text
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.
Connection Options
There are 2 different ways to incorporate the backplate into your existing watercooling loop:
Variant 1
The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit.
Variant 2
The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)
The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.
Brilliant Illumination
Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art. 15360) or a Digital RGB capable motherboard.
Drawing Description
The product features a detailed technical drawing illustrating its dimensions and port layout. Key dimensions include an overall length of 206.54 mm, width of 120.71 mm, and height of 13.3 mm. It is equipped with two G1/4" threaded ports for water cooling connections on the top surface and two side-mounted connections suitable for 5/3mm tubing. The drawing also indicates the placement of six addressable digital RGB LEDs integrated into the cooling block's sides.
