Kohler Archer K-1949-XHGH Drop-In Whirlpool + Heated BubbleMassage™ Air Bath

Product Overview

The Kohler Archer K-1949-XHGH is a drop-in whirlpool and Heated BubbleMassage™ air bath designed for a relaxing bathing experience. It combines hydromassage with warm air bubbles for comprehensive comfort.

Features

• Offers both whirlpool hydromassage and Heated BubbleMassage™ air bubbles for a truly relaxing bathing experience.
• 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage.
• Purge cycles remove residual water from air channels after use to keep the system clean.
• Variable-speed blower allows users to adjust Heated BubbleMassage™ massage intensity to 18 levels.
• Single-speed whirlpool revitalizes sore muscles.
• 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet.
• Comfort Depth® design offers a convenient 19" step-over height while retaining the same depth as a standard 21" bath.
• Molded lumbar support offers extra comfort while bathing.
• Slotted overflow allows for deep soaking.
• Bottom surface manufactured with textured appearance.
• Reversible drain.
• Coordinates with other products in the Archer collection.

Material

• Acrylic.

Hydrotherapy & Technology

• Heated BubbleMassage™
• Whirlpool
• Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath.
• Bath includes auto purge (after bath drains) and manual purge cycles to remove residual water and keep system clean.
• Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off.
• User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for whirlpool.

Required Products/Accessories

• K-7271 Brass Slotted Overflow Bath Drain
• or K-7272 PVC Slotted Overflow Bath Drain

Recommended Products/Accessories

• K-24916 Wireless Music Kit

Diagram and Dimensions

The bath is a rectangular drop-in style tub. Key dimensions are indicated. The overall length is 66 inches (1676 mm) and the overall width is 32 inches (813 mm). The overall height is 16 inches (406 mm). Features include a Lumbar Angle of 24 degrees, a Slotted Overflow, and a drain located at the end of the tub. The Comfort Depth® design is noted, offering a 19-inch step-over height while maintaining a standard 21-inch bath depth. The pump access opening is 20 inches (508 mm) wide by 15 inches (381 mm) high minimum. The drop-in rim is 1-1/2 inches (38 mm) wide. The bath drain is 1-1/2 inches. The depth from the rim to the drain is 15-11/16 inches (398 mm), and the height from the bottom to the drain is 3-1/4 inches (83 mm).

Technical Information

• Installation: Drop-in
• Drain location: End
• Basin area, bottom: 50-3/8" x 19-5/8" (1280 mm x 498 mm)
• Basin area, top: 57-5/16" x 24-1/16" (1456 mm x 611 mm)
• Weight: 152 lbs (68.9 kg)
• Minimum floor load: 49 lbs/ft² (239.2 kg/m²)
• Water depth: 15-5/16" (389 mm)
• Water capacity: 66 gal (249.8 L)

Required Electrical Service

Three dedicated circuits are required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).

• Pump, Heater: 120 V, 15 A, 60 Hz
• Heater: 120 V, 15 A, 60 Hz
• Blower: 120 V, 15 A, 60 Hz

Electrical Component Rating

• Pump: 120 V, 7 A, 60 Hz
• Heater: 120 V, 5 A, 60 Hz
• Heater: 120 V, 12 A, 60 Hz
• Blower: 120 V, 10 A, 60 Hz

Codes and Standards

• ASME A112.19.7/CSA B45.10
• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
• UL 1795
• CSA C22.2 No. 218.2
• ADA
• ICC/ANSI A117.1

Warranty Information

• KOHLER® Plastic Baths and Receptors: Lifetime Limited Warranty
• KOHLER® Hydrotherapy Components: Five-Year Limited Warranty

See website for detailed warranty information.

Available Colors/Finishes

Color tiles intended for reference only.

Notes

• Measure your actual product for rough-in details.
• Install this product according to the installation instructions.
• The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
• This product is designed for drop-in installation only. It is not suited for use in a three-wall alcove with an overhead shower.
• Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
• Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
• ADA compliant when installed to the specific requirements of these regulations.