Delimano Brava Drum Grater - User Manual

This user manual provides instructions for the Delimano Brava Drum Grater, a kitchen appliance designed for slicing, shredding, and grating food items. Please read carefully before use.

Safety Warnings

• Never allow children to use the unit. Ensure close supervision when children are present.
• Use only manufacturer-recommended accessories to avoid injury.
• Use the unit only for its intended purpose.
• Keep hands and sharp objects away from the blades during operation, maintenance, and cleaning.
• Avoid using fruits with hard seeds, as they can damage the blades.
• Staining of the unit and blades is normal and does not affect performance.
• Always use the crank handle; never feed food by hand.
• Do not scrape food from the blade with fingers to prevent cuts.
• Ensure all parts are properly assembled before each use.
• This product is not a toy. Keep it out of reach of children. Do not clean with abrasive agents or steel wool.
• Intended for household use only.
• Do not attempt repairs yourself. Dispose of the product according to local laws.
• Wash thoroughly before first use.
• User assumes responsibility for usage and consequences.

Parts Identification

Refer to Diagram 1 for visual reference.

1. Main Unit

The primary body of the grater.

2. Lock/Release Lever

Locks and releases the suction cup on the bottom of the unit.

3. Handle

Rotates the blade assembly.

4. Feeder

Holds food to be cut.

5. Dispenser

Releases the cut-up food.

6. Pusher

Helps push food down the feeder and towards the blade.

7. Grating Blade

Ideal for salads.

8. Slicing Blade

Ideal for large slices.

9. Shredding Blade

Ideal for fine shredding.

10. Base with Suction Cup

Secures the unit to the surface.

Assembly

Full Unit Assembly

Note: Your unit may come fully assembled. Follow these steps for disassembly and cleaning.

1. Insert the Dispenser into the base until it clicks (See Diagram A).
2. Select a blade and insert it into the Dispenser until it goes through the opening (See Diagram B).
3. Attach the Handle by aligning its square with the blade's square. Push until it clicks (See Diagram C).
4. Place the Pusher inside the Feeder (See Diagram C).
5. To change the blade: Unlock the handle (See Diagram D). While pressing and holding the unlock button, pull the handle to remove it.

Unit Disassembly

1. Unlock the handle (See Diagrams D+E). While pressing and holding the unlock button, pull the handle to remove it.
2. Remove the blade and set it aside (See Diagram F).
3. To remove the Dispenser from the base, slide down the release button with one hand and pull the Dispenser out (See Diagram G). Note: Remove the handle before removing the dispenser.

Usage

Before First Use

Unpack all parts. Wipe the main unit with a damp cloth. Rinse all parts in warm, soapy water. Dry thoroughly.

Fixation

Place the grater on a smooth, flat surface. Press down firmly on the unit and turn the lever clockwise to the LOCK position. This activates the suction cup for stability (See Diagram: Fixation).

Operation

1. Select the desired blade (slicing, shredding, or grating).
2. Place food into the Feeder. Hold the food with one hand and turn the handle clockwise to begin processing (See Diagram: Usage).
3. Use the Pusher to guide food towards the blade, especially when the food level is low.

Cleaning

Clean immediately after each use.

1. Rotate the handle a few times to remove leftover food.
2. Remove the used blade carefully (blades are very sharp).
3. Wash all parts in mild soap solution or place in the dishwasher. Do not use abrasive cleaners.
4. Wipe the main unit with a soft damp cloth. Certain foods may discolor the unit; rub gently with a soft cloth or sponge.

Specifications & Manufacturer Information

Product Name: Delimano Brava Drum Grater

ID: 110008658

Country of Origin: P.R.C.

Manufacturer: Cixi Gstar Electric Appliance Co., Ltd

Trademark Owner/Importer: Top Shop International SA

Production Date/Batch Number: Found on product and packaging.

Materials: PETG, POM, ABS, Chlorinated polyethylene, PP, Stainless steel 430.

Operating Temperature/Humidity: -40°C – 85°C, 40% – 70% relative humidity.

Storage Temperature/Humidity: -40°C – 85°C, 40% – 70% relative humidity.

Transport Conditions: -40°C – 85°C, 40% – 70% relative humidity.

Environmental Information & Disposal

Transport and protective packing materials are environmentally friendly and recyclable. Dispose of plastic, wrappings, and bags safely and keep out of reach of children. Recycle these materials.

This product is a Food Contact Safe Product.