Product Data Sheet

Regulated Power Supply, 380...500V AC, 24V, 20A, 3 phases, Universal

Model: ABLU3A24200

Product availability: Stock - Normally stocked in distribution facility

Main

Attribute	Value
Range of Product	Modicon Power Supply
Product or Component Type	Power supply
Power supply type	Regulated switch mode
Variant option	Universal
Enclosure Material	Metal
Nominal input voltage	380...500 V AC three phase
Kw Rating	480 W
Output voltage	24 V DC
Power supply output current	20 A
Permissible temporary current boost	1.5 x In for 5 seconds

Complementary

Attribute	Value
Efficiency at full load	93% 380...575 V AC 3 phase
Nominal network frequency	50...60 Hz
Network system compatibility	TN, TT, IT
Maximum leakage current	2 mA 500 V AC
Input protection type	Integrated fuse (not interchangeable) 3.15 A; External protection (recommended)
Inrush current	35 A 380 V; 35 A 500 V
Power factor	0.90 at 380 V AC; 0.88 at 500 V AC
Efficiency	93% 380 V AC; 93% 500 V AC
Output voltage adjustment	24...28 V
Power dissipation in W	33 W
Current consumption	< 0.85 A 380 V AC; < 0.73 A 500 V AC
Turn-on time	< 1 s
Holding time	> 20 ms 380 V AC; > 20 ms 500 V AC
Startup with capacitive loads	200000 μF
Residual ripple	< 150 mV

Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price.

Specifications

Attribute	Value
Meantime between failure [MTBF]	876500 h at 77 °F (25 °C), full load conforming to SR 332; 374800 h at 131 °F (55 °C), 80% load conforming to SR 332
Output protection type	Against overload and short-circuits, protection technology: manual or automatic reset by switch; Against over temperature, protection technology: automatic reset; Against overvoltage, protection technology: manual reset
Connections - terminals	Screw connection 4...6 mm², AWG 12...AWG 10) without wire end ferrule output; Screw connection 4 mm², AWG 12) with wire end ferrule output; Screw connection 0.75...6 mm², AWG 18...AWG 12) without wire end ferrule input; Screw connection 0.75...4 mm², AWG 18...AWG 12) with wire end ferrule input; Cage clamp 0.2...1.5 mm², AWG 22...AWG 16) without wire end ferrule diagnostic relay; Cage clamp 0.2...0.75 mm², AWG 22...AWG 18) with wire end ferrule diagnostic relay; Cage clamp 0.2...0.75 mm², AWG 22...AWG 18) with wire end ferrule shut down input
Line and load regulation	< 0.17% network 100% load in line at 77 °F (25 °C); < 0.6% +/- 0.5% network 150% load at 77 °F (25 °C)
Status LED	1 LED (green and red) product status
Depth	5.01 in (127.3 mm)
Height	4.9 in (124 mm)
Width	2.6 in (65 mm)
Product Weight	2.54 lb(US) (1.15 kg)
Output coupling	Parallel
Marking	CE, CUL Listed, CUL Recognized, RCM, CB Scheme, EAC, KC, UKCA, CURus
Mounting support	Top hat type TH35-15 rail IEC 60715; Top hat type TH35-7.5 rail IEC 60715; Double-profile DIN rail
Supply	SELV IEC 60950-1; SELV IEC 60204-1; SELV IEC 60364-4-41
Dielectric strength	4000 V AC with input to output; 2000 V AC with input to ground; 1500 V AC with output to ground; 4000 V AC with input to diagnostic relay; 500 V AC with output to diagnostic relay; 1500 V AC with diagnostic relay to ground; with shutdown input not isolated from output
Diagnostic relay	Electromechanical relay 1000.0 mA 30 V
Service life	10 year(s) 104 °F (40 °C) 80% load
Overvoltage category	III, II

Environment

Standards	Value
Standards	IEC 62368-1; EN/IEC 61204-3; IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61000-3-2; EN 61000-3-3; UL 62368-1; CSA C22.2 No 62368-1; CSA C22.2 No. 107.1

Product Certifications

Certification	Status
CE	Yes
CUL Listed	Yes
CUL Recognized	Yes
RCM	Yes
CB Scheme	Yes
EAC	Yes
KC	Yes
UKCA	Yes
CURus	Yes

Operating Conditions

Attribute	Value
Operating altitude	< 5000 m overvoltage category III; overvoltage category II
Shock resistance	150 m/s² 11 ms
IP degree of protection	IP20
Ambient air temperature for operation	-13...131 °F (-25...55 °C) without current derating mounting position A < 6561.68 ft (2000 m); 131...158 °F (55...70 °C) with current derating of 3.3% per °C mounting position A < 6561.68 ft (2000 m)
Electrical shock protection class	Class I
Pollution degree	2
Vibration resistance	3.5 mm (f= 3...11.9 Hz) conforming to IEC 60068-2-6; 20 m/s² (f= 11.9...150 Hz) conforming to IEC 60068-2-6
Electromagnetic immunity	Immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2; Immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2; Immunity to conducted RF disturbances - test level: 15 V/m (80 MHz...2 GHz) conforming to IEC 61000-4-3; Immunity to conducted RF disturbances - test level: 5 V/m (2...2.7 GHz) conforming to IEC 61000-4-3; Immunity to conducted RF disturbances - test level: 5 V/m (2.7...6 GHz) conforming to IEC 61000-4-3; Immunity to fast transients - test level: 4 kV (on input-output) conforming to IEC 61000-4-4; Surge immunity test - test level: 4 kV (between power supply and earth) conforming to IEC 61000-4-5; Surge immunity test - test level: 3 kV (between phases) conforming to IEC 61000-4-5; Immunity to conducted RF disturbances - test level: 15 V (0.15...80 MHz) conforming to IEC 61000-4-6; Immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to IEC 61000-4-8; Immunity to voltage dips conforming to IEC 61000-4-11
Electromagnetic emission	Disturbing field emission conforming to EN 55016-2-3; Limits for harmonic current emissions conforming to IEC 61000-3-2; conforming to EN 55016-1-2; conforming to EN 55016-2-1; Conducted emissions IEC 61000-6-3; Radiated emissions IEC 61000-6-4

Ordering and Shipping Details

Attribute	Value
Category	US1CP1222525
Discount Schedule	CP12
GTIN	3606482185258
Returnability	Yes
Country of origin	IN

Packing Units

Attribute	Value
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	6.10 in (15.500 cm)
Package 1 Width	8.27 in (21.000 cm)
Package 1 Length	8.74 in (22.200 cm)
Package 1 Weight	3.252 lb(US) (1.475 kg)
Unit Type of Package 2	S03
Number of Units in Package 2	7
Package 2 Height	11.81 in (30.000 cm)
Package 2 Width	11.81 in (30.000 cm)
Package 2 Length	15.75 in (40.000 cm)
Package 2 Weight	24.097 lb(US) (10.930 kg)
Unit Type of Package 3	P12
Number of Units in Package 3	168
Package 3 Height	31.50 in (80.000 cm)
Package 3 Width	35.43 in (90.000 cm)
Package 3 Length	47.24 in (120.000 cm)
Package 3 Weight	598.917 lb(US) (271.664 kg)

Dimensions Drawings

Dimensions:

Front View:

Height: 4.9 in (124 mm)

Width: 2.6 in (65 mm)

Side View:

Depth: 5.01 in (127.3 mm)

Top View:

Width: 2.6 in (65 mm)

Length: 5.01 in (127.3 mm)

Back View:

Width: 2.6 in (65 mm)

Height: 4.9 in (124 mm)

Connections and Schema

Wiring Diagram

Input terminals: L1, L2, L3 for AC input; PE for protective earth.

Output terminals: +1, +2 for positive DC output; -3, -4 for negative DC output.

Diagnostic relay terminals: 11, 14.

Block Diagram

The block diagram illustrates the internal components of the power supply:

(1) Input
(2) EMI filter
(3) Relay control
(4) Interleave PFC converter
(5) Primary control
(6) Main LLC converter
(7) PFC controller
(8) Primary AUX
(9) Synchronous rectifier
(10) SR controller
(11) CV & CC feedback
(12) Secondary MCU
(13) Secondary AUX
(14) Output filter
(15) Automanual switch
(16) LED control

Mounting and Clearance

Mounting Position

Correct Mounting:

Ensure adequate clearance around the unit for ventilation.
Recommended clearances: 2.0 in (50 mm) on top and bottom, 0.40 in (10 mm) on sides, and 0.80 in (20 mm) on the front.

Incorrect Mounting:

Illustrations show incorrect mounting orientations that should be avoided, including mounting upside down or with insufficient clearance.

Performance Curves

Performance Curve (Ambient Temperature vs. Load Percentage)

The graph shows the relationship between ambient temperature (X-axis) and the percentage of maximum load (Y-axis). The power supply can operate at 100% load up to approximately 40°C, after which the maximum load capacity decreases.

Overvoltage Protection Behavior

This diagram illustrates the overvoltage protection behavior:

(1) Variable output voltage range
(2) Latch (indicates a protective shutdown)
(3) Typical overvoltage condition at the output
(4) Maximum overvoltage protection level
(5) Overvoltage protection
(6) Nominal output voltage
(7) Zero output

The overvoltage range is 26-36 VDC in Latch Mode.

Environmental Data

Schneider Electric is committed to achieving Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via their "Use Better, Use Longer, Use Again" campaign.

Materials and Substances

Packaging made with recycled cardboard: No
Packaging without single use plastic: No
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
REACH Regulation: REACH Declaration

Repack and remanufacture

Circularity Profile: End of Life Information
Take-back: No
WEEE: The product must be disposed of in European Union markets following specific waste collection and never end up in rubbish bins.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 10 Pages, 359.91KB

Generatepdf.aspx?salesorgid=78&dist=849&lang=42&form=no&documenttype=plain&productid=ABLU3A24200 cairo 1.15.12 (http://cairographics.org)

Related Documents

	Schneider Electric ABLU3A48100 Regulated Power Supply Data Sheet Technical specifications and data for the Schneider Electric ABLU3A48100 regulated power supply, featuring 380-500V AC input, 48V DC output, and 10A current.
	Schneider Electric ABLU3A24400 Regulated Power Supply Data Sheet Technical data sheet for the Schneider Electric ABLU3A24400, a 380-500V AC, 24V, 40A, 3-phase universal regulated power supply. Includes specifications, dimensions, wiring diagrams, and environmental data.
	Schneider Electric ABLU3A24100 Regulated Power Supply Data Sheet Detailed product data sheet for the Schneider Electric ABLU3A24100, a 380-500V AC, 24V, 10A, 3-phase universal regulated power supply. Includes specifications, dimensions, wiring diagrams, block diagrams, performance curves, and environmental data.
	Schneider Electric ABLS1A24021 Optimized Regulated Power Supply Data Sheet Technical data sheet for the Schneider Electric ABLS1A24021 Optimized Regulated Power Supply, featuring 100-240V AC input, 24V DC output, and 2.1A current. Includes specifications, environmental data, ordering information, and mounting guidelines.
	Schneider Electric ABLS1A48050 Optimized Power Supply - 48V, 5A Technical data sheet for the Schneider Electric ABLS1A48050 Optimized Regulated Power Supply. Features include 100-240V AC input, 48V DC output, 5A current, and high efficiency.
	Schneider Electric ABLS1A48100 Regulated Power Supply Data Sheet Technical data sheet for the Schneider Electric ABLS1A48100 regulated power supply, featuring 100-240V AC input, 48V DC output, and 10A current. Includes specifications, environmental data, ordering information, and performance curves.
	Schneider Electric ATV320U15N4C Variable Speed Drive - 1.5kW, 380-500V Detailed product data sheet for the Schneider Electric ATV320U15N4C variable speed drive. It covers technical specifications, characteristics, environmental ratings, connection diagrams, and performance curves for industrial applications.
	Schneider Electric Altivar Machine ATV320 Variable Speed Drive - 2.2kW, 380-500V, 3-Phase Technical data sheet for the Schneider Electric Altivar Machine ATV320 variable speed drive. This compact, 2.2kW, 3-phase drive operates at 380-500V and is suitable for complex machines. Includes specifications, dimensions, environmental data, and connection diagrams.