AMT0111 Cat Tree Assembly Instructions
Product Information
Model: AMT0111
Brand: PEQULTI
Parts List
| Label | Description | Quantity |
|---|---|---|
| A | 485*485*12mm | 1pc |
| B | 485*485*12mm | 1pc |
| C | 485*205*12mm | 1pc |
| D | 485*245*12mm | 1pc |
| E | Accessory/Platform | 1pc |
| F | 355*185*12mm | 1pc |
| G | 300mm Post | 1pc |
| H | Cube/House | 1pc |
| I | Cube/House | 1pc |
| J | 300*53.5mm Post | 4pcs |
| K | 300*53.5mm Post | 1pc |
| L | 85*53.5mm Post | 3pcs |
| M | 430*53.5mm Post | 1pc |
| N | 330*53.5mm Post | 1pc |
| O | 330*53.5mm Post | 1pc |
| P | 215*30mm Dowel | 7pcs |
| Q | Replaceable Dangle Toy | 1pc |
Hardware List
| Label | Description | Quantity |
|---|---|---|
| W1 | 10x40mm Screw | 13pcs |
| W2 | 10x85mm Screw | 5pcs |
| W3 | 6x35mm Screw | 14pcs |
| W4 | 5mm Screw/Bolt | 1pc |
| W5 | 6x16mm Screw | 4pcs |
| W6 | Screw/Bolt | 2pcs |
| N1 | Connector/Cap | 1pc |
| N2 | Connector/Cap | 1pc |
| N3 | Connector/Cap | 1pc |
Assembly Instructions
Step 1
Assemble the first cube. Insert four P dowels into the designated holes on the edges of cube H. Align cube I with cube H and secure them together using four W3 screws.
Step 2
Attach the assembled cube structure to the main support. Insert two J posts and one P dowel into the base of the H/I assembly. Connect this assembly to the lower structure using W3 screws.
Step 3
Prepare the first base layer. Attach four J posts and one K post to base panel A using W1 screws. Ensure all posts are firmly attached.
Step 4
Prepare the second base layer. Attach two J posts and two L posts to base panel B using W1 and W2 screws. Ensure all posts are firmly attached.
Step 5
Attach longer posts M and N to the structure. These posts connect different levels of the cat tree. Use appropriate screws (likely W1 or W2) for attachment.
Step 6
Install the ramp F and platform D. Attach ramp F to a post and platform D to an upper level using W5 and W6 screws. Ensure they are securely mounted.
Step 7
Add intermediate posts. Attach posts C, J, and L to the structure using W1, W2, and W4 screws. These posts provide support for upper levels.
Step 8
Install upper level posts. Attach component I (cube/house), J, and L posts to the structure using W1 and W2 screws. These form part of the upper levels.
Step 9
Attach the top accessories. Secure post G and the replaceable dangle toy Q to the uppermost platform of the cat tree.
Step 10
Install the top perch. Attach platform D to the very top of the cat tree structure.
Step 11
Attach the accessory platform E to the cat tree. This platform serves as an additional resting spot.
Step 12
Final assembly. The cat tree is now complete. Ensure all parts are securely fastened.
Customer Support
We are committed to delivering customer-driven products that live up to your high standards.
We encourage you to write a review sharing your experiences with the product.
For further services:
Email us for further assistance: pawzroad@gmail.com.
