AMT0110-SJB Cat Tree Assembly Instructions
Thank you for choosing PEQULTI. We are committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
For further services, email us at pawzroad@gmail.com.
Parts List
Please verify all parts are present before assembly.
- W1: 8x40mm screws (17 pcs)
- W2: 8x80mm screws (5 pcs)
- 5mm Allen Wrench (1 pc)
- N1: Small post (1 pc)
- N2: Small post (1 pc)
- A: Base panel (550x450x12mm) (1 pc)
- B: Middle platform (510x410mm) (1 pc)
- C: Condo house (550x450x12mm) (1 pc)
- D: Top platform (450x300x12mm) (1 pc)
- E: Hammock (1 pc)
- F: Small platform (250x250x12mm) (1 pc)
- G: Short posts (2 pcs)
- H: Medium posts (400x53.5mm) (3 pcs)
- I: Medium posts (400x53.5mm) (4 pcs)
- J: Short post (150x53.5mm) (1 pc)
- K: Medium post (500x53.5mm) (1 pc)
- L: Short post (270x53.5mm) (1 pc)
- M: Small posts (215x25mm) (4 pcs)
Assembly Steps
- Attach the condo house (C) to the base panel (A) using screws (W2) and the Allen wrench. Insert small posts (M) into the designated holes on the base panel (A).
- Place the first middle platform (A) onto the small posts (M). Insert medium posts (H) into the holes on this platform.
- Place the second middle platform (B) onto the medium posts (H). Insert medium posts (I) into the holes on platform B.
- Place the third middle platform (C) onto the medium posts (I). Insert medium posts (H) into the holes on platform C.
- Attach the small platform (F) to the top of the medium posts (H) using screws (W1). Insert short post (J) into the center hole of platform F.
- Place the top platform (D) onto the short post (J) and the surrounding medium posts (H). Secure with screws (W1).
- Attach the hammock (E) to the designated points on the structure using the provided fasteners.
- Insert the small posts (N1, N2) into the top platform (D) and secure them with screws (W1).
