Product Overview
The Fellowes SB-83i is a strip-cut paper shredder designed for efficient and secure document destruction in home and office environments. It offers advanced features like 100% Jam Proof System and SafeSense® Technology for user safety and operational ease.
Image Description: A front-view illustration of the Fellowes SB-83i shredder. It is a compact, silver and black desktop shredder with a pull-out waste bin. The top panel features the paper entry slot, controls, and a CD/card flap. Casters are visible at the base.
Key Components
Diagram Description: An illustration showing the Fellowes SB-83i shredder with various parts labeled A through R.
- A. SafeSense® Technology: Sensor system to detect human proximity.
- B. Paper Entry: Slot for feeding paper.
- C. Safety Instructions: Reference to safety guidelines.
- D. CD/Card Flap: Separate slot for shredding CDs and credit cards.
- E. Pullout Bin: Removable waste bin.
- F. Casters: Wheels for mobility.
- G. Disconnect Power Switch: Main power ON/OFF switch (⏻).
- H. Power Controls: Buttons for operating the shredder (e.g., Auto, Reverse, Forward).
- I. Overheat Indicator: Red light indicating motor overheat. ?
- J. Bin Open Indicator: Red light indicating the bin is not properly closed. ?
- K. Bin Full Indicator: Red light indicating the waste bin is full. ?
- L. Remove Paper Indicator: Red light indicating a paper jam or need to remove paper. ?
- M. SafeSense Indicator: Yellow light indicating SafeSense status. ?
- N. Sheet Capacity Indicator: Lights showing the number of sheets being fed.
- O. Auto Correcting Button: Blue button for automatic jam correction. ?
- P. Reverse Button: Button to reverse shredding direction. ◀️
- Q. On/Off Button: Blue button to turn the shredder on or off. ?
- R. Forward Button: Button to advance shredding direction. ▶️
Capabilities
Will Shred: Paper, credit cards, CD/DVDs, staples, and small paper clips.
Will Not Shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays, or plastic other than noted above.
Paper Shred Size: Strip-Cut: 7/32 inches (5.8mm)
Maximum Shredding Capacity:
- Sheets per pass: 18*
- CDs/Cards per pass: 1*
- Paper entry width: 9" / 230mm
*Based on 8.5"x11", 20lb. (75g) paper at 120V, 60 Hz, 3Amps. Heavier paper, humidity, or voltage variations may reduce capacity. Recommended daily usage: 50-100 passes, 50 credit cards, 10 CDs.
Operating environment: 50-80°F (10-26°C) and 40-80% relative humidity.
Advanced Product Features
100% Jam Proof System
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Technical Explanation: The sheet capacity indicator lights show when too many or too few sheets are fed. If too many sheets are fed (red light ?), the shredder will not operate. Reduce the sheet quantity. If misfed, the shredder automatically adjusts to power through or reverse out the paper.
Patented SafeSense® Technology
Stops shredder immediately when hands are too close to the paper entry.
Technical Explanation: The shredder stops automatically and the indicator light illuminates when hands are too close to the paper entry. It resumes normal operation when hands are no longer near the entry. A flashing indicator warns when SafeSense® technology has been shut off.
SilentShred™ Technology
Provides whisper-quiet, efficient shredding performance without noisy disruptions.
Technical Explanation: The SilentShred™ motor ensures quiet operation.
Important Safety Instructions
Read Before Using!
- Keep away from children and pets. Keep hands away from the paper entry. Always set to OFF (0) or unplug when not in use.
- Keep foreign objects (gloves, jewelry, clothing, hair, etc.) away from shredder openings. If an object enters the top opening, switch to Reverse (◀️) to back out the object.
- Never use aerosol products, petroleum-based lubricants, or other flammable products on or near the shredder. Do not use canned air.
- Do not use if damaged or defective. Do not disassemble. Do not place near heat sources or water.
- Ensure the Disconnect Power Switch (G) is in the ON (I) position for operation. In an emergency, move the switch to OFF (0) to stop the shredder immediately.
- Avoid touching exposed cutting blades under the shredder head.
- Rotate the CD flap entry for shredding CDs/cards. Keep fingers away from the CD hole. The Jam Proof System is disabled when the flap is in the CD position.
- Do not insert foreign objects into the paper entry.
- The grounded socket-outlet shall be installed near the equipment and shall be easily accessible.
Basic Set Up and Shredding Operation
Caster Installation
Steps:
- Unpack shredder.
- Attach casters to the base of the shredder. (Illustrations show wheels being inserted into the base).
Paper or CD/Card Shredding
Steps:
- Plug in the shredder and set the Disconnect Power Switch (G) to ON (I).
- Press the ON/OFF button (Q) to activate (blue light ?).
- Feed paper straight into the paper entry and release.
- To shred CDs, rotate the CD flap into place.
- Hold a CD/card by the edge and feed it into the CD/Card flap entry and release.
- When finished shredding, set the power switch to OFF (0).
Continuous Operation: Maximum 20 minutes. The shredder runs briefly after each pass to clear the entry. Continuous operation beyond 20 minutes requires a 40-minute cool-down period.
100% Jam Proof System Operation
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Set-up and Testing:
- Feed paper into the paper entry and release.
- If too many sheets are fed, the indicator light will turn red ?, and the shredder will not take the paper. Remove several sheets until the indicator is below red, then the shredder will take the paper.
- If the indicator is below yellow, you can add more sheets without fear of jamming. Increase the number of sheets fed up to the top yellow light to maximize productivity.
Misfed Paper:
- If paper is misfed and stops shredding, all indicator lights will illuminate, and the shredder will pause for 3-6 seconds.
- An automatic correcting action will power through the misfed paper, allowing shredding to continue (do not add more paper during this flashing period).
- If there is too much paper for the shredder to power through, it will reverse the paper out for easy removal.
- If the "Remove Paper" icon (?) is illuminated, press Reverse (◀️) and remove the paper.
- Reduce paper quantity to an acceptable amount and refeed into the paper entry.
SafeSense® Technology Operation
Stops shredder immediately when hands are too close to the paper entry.
Set-up and Testing:
- Turn the shredder ON (Q) to activate SafeSense®.
- Touch the test area and look for the SafeSense® indicator (M) to illuminate yellow ?.
- SafeSense® is now active and working properly.
Advanced Product Feature Maintenance and Troubleshooting
100% Jam Proof System
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Disabling the Feature:
- To disable SafeSense®, press and hold the Auto button (O) and the Reverse (◀️) key simultaneously.
- Once disabled, the blue Auto light (O) will no longer be illuminated. (To re-engage, repeat step 1).
- Shredding can continue with the system disabled, but a paper jam may occur if too many sheets are fed, and the "Remove Paper" icon (?) will illuminate.
- If a jam occurs, press and hold the Forward (▶️) key until the document is completely through the shredder.
- If the jam is not cleared, press Reverse (◀️) briefly. Repeat steps 4 and 5 until the paper is shredded.
- If steps 4 and 5 do not clear the jam, reverse the paper all the way out, remove several sheets, and refeed.
Basic Product Maintenance and Troubleshooting
Cleaning Auto-Start Infrared Sensors
Paper detection sensors are designed for maintenance-free operation. However, dust can block sensors, causing the motor to run even without paper. Two sensors are located in the center of the paper entry.
To Clean the Sensors:
- Turn off and unplug the shredder.
- Lift the CD flap.
- Locate the auto-start infrared sensors.
- Dip a cotton swab in rubbing alcohol.
- Using the cotton swab, wipe away any contamination from the paper sensors.
Preventive Maintenance and Miscellaneous Troubleshooting
- Run the shredder once a day in reverse for 15 seconds to clear the cutters.
- Empty the wastebasket when the "Bin Full" indicator light (?) is illuminated. Recommended bag: #36052.
- The shredder will not function if the pull-out bin is not fully inserted or needs emptying.
- When shredding for prolonged periods, the motor may become warm and require a cool-down period. The overheat indicator (?) will alert you; this model requires 40 minutes to cool down.
Accessories
Maintenance is important for protecting your investment. Consider using Fellowes shredder bags.
Product: SB-83i Shredder plastic bag - #36052
Problem Still Not Solved?
Fellowes offers support options for technical information and assistance.
- Visit www.fellowes.com for an extensive online support section with self-service options.
- Contact customer service professionals for assistance.
Go to the Support Section at www.fellowes.com or see the back page of the manual for telephone numbers.
Warranty
Fellowes shredders are built for durability and long life. The warranty covers product performance, service, and support, including a lifetime cutter warranty.
Limited Warranty: Fellowes, Inc. warrants parts against defects in material and workmanship for 2 years from the date of purchase by the original consumer. Cutting blades are warranted for the lifetime of the shredder. Remedies include repair or replacement of defective parts at Fellowes' option. This warranty does not cover abuse, mishandling, or unauthorized repair. Implied warranties are limited to the duration of this warranty. Fellowes is not liable for consequential or incidental damages. This warranty provides specific legal rights and is valid worldwide, subject to local law limitations.
For more details or service, contact Fellowes or your dealer.
Date of Purchase
[Field for Date of Purchase]
Serial Number
The serial number is located on the inside of the cabinet.
[Field for Serial Number]
Image Description: An illustration showing a small section of the shredder's interior, indicating where the serial number label is typically found.
Useful Phone Numbers
Help Line:
- Australia: +1-800-33-11-77
- Canada: +1-800-665-4339
- Europe: 00-800-1810-1810
- Mexico: +1-800-234-1185
- United States: +1-800-955-0959
Fellowes Regional Contacts:
- Australia: +61-3-8336-9700
- Benelux: +31-(0)-76-523-2090
- Canada: +1-905-475-6320
- Deutschland: +49-(0)-5131-49770
- Espana: +34-91-748-05-01
- France: +33-(0)-1-78-64-91-00
- Italia: +39-071-730041
- Japan: +81-(0)-3-5496-2401
- Korea: +82-(0)-2-3462-2884
- Malaysia: +60-(0)-35122-1231
- Polska: +48-(22)-481-96-12
- Singapore: +65-6221-3811
- United Kingdom: +44-(0)-1302-836836
- United States: +1-630-893-1600
Company Address: 1789 Norwood Avenue, Itasca, Illinois 60143-1095 USA
Website: www.fellowes.com
©2010 Fellowes, Inc. Part No. 404849
