Smart Blind Lite User Manual

Product Instruction

The THIRDREALITY ZigBee Smart Blind Lite is a smart honeycomb curtain designed for simple installation and convenient control, functioning both online and offline. It features a thoughtful bottom design that automatically detects the window sill to stop the blind. The drive units are located at the bottom, making battery replacement more accessible. Enhanced control options, including voice control, app control, routines, schedules, timers, and group settings, are available when connected to compatible ZigBee-enabled gateways such as Amazon Echo devices, SmartThings, Home Assistant, Eero 6/6 Pro, Third Reality Hub, and Hubitat.

Product Features

1. 1 Directly work with compatible Echo devices: The Smart Blind Lite is a standard ZigBee device that can directly integrate with compatible Echo devices featuring a built-in ZigBee hub, including Echo 4th Gen, Echo Plus (1st & 2nd Gen), Echo Show 10 (2nd & 3rd Gen), and Echo Studio.
2. 2 Work with multiple platforms: It can also connect with SmartThings, Home Assistant, Eero 6 & Eero 6 Pro, Third Reality Hub, and Hubitat Elevation.
3. 3 Unique and novel design: The bottom drive design simplifies daily operation and battery replacement. A bottom sensor makes it easy to adjust the blind's height within 72 inches at any time.
4. 4 No worry about power support: With over 6 months of battery life using standard AA batteries, power is not a concern. This is ideal for windows that are too high to reach for charging or lack nearby outlets.
5. 5 Functions provided by Alexa App: The Smart Blind Lite works with Alexa, offering functions like scheduling, grouping, and routines. Users can set the blind to open or close based on sunset or sunrise times, among other automations.

Product Details

LED Status & Buttons

The Smart Blind Lite has an LED indicator and control buttons on its bottom rail.

• LED Indicator:
  • Fast blinking: Indicates pairing mode.
  • Slow blinking: Indicates the device is offline.
  • Double blinking: Indicates low power.
• Buttons:
  • Up: Retracts the blind.
  • Stop/Reset: A single press stops the blind; a long press enters pairing mode.
  • Down: Extends the blind.

Bottom Sensor

When the Smart Blind Lite is extending, the Bottom Sensor will detect any surface it encounters (e.g., the window sill or a finger) and stop the blind at that position. This sensor is also used to set the desired bottom position for the blind. (Refer to Page 9 for setting the bottom position).

Battery Cover

The battery compartment is located at the bottom of the blind. Ensure correct polarity when installing AA batteries. Batteries are sold separately.

Included Hardware

The package includes:

• Screws × 2
• Plastic Expansion Bolts × 2
• L Brackets × 2

Installation

THIRDREALITY Smart Blind Lite supports both inside and outside mounting. The necessary L brackets, screws, and plastic expansion bolts are provided. You will need a PH2 screwdriver. For masonry surfaces, an electric drill with an M5 drill bit is recommended. Ensure the THIRDREALITY logo on the Smart Blind Lite and the button on the L brackets face inwards during installation.

Mounting Options

1. 1 Choose Mount Type: Select either an inside or outside mount.
   • Inside Mount: Ensure your window recess has a minimum depth of 2 inches.
   • Outside Mount: To allow the blind to fully expose the window when closed, ensure there is at least 4.3 inches of flat space above the window.

a. Inside Mount Installation Steps

• Measure and mark the position for the brackets according to the diagram.
• For wooden surfaces: Use a PH2 screwdriver and the provided screws to secure the bracket.
• For masonry surfaces: Drill a pilot hole using an M5 drill bit for the plastic expansion bolt. Insert the bolt, then use a PH2 screwdriver to secure the bracket with the provided screw.

b. Outside Mount Installation Steps

• Measure and mark the corresponding position for the brackets according to the diagram.
• For wooden surfaces: Use a PH2 screwdriver and the provided screws to secure the bracket.
• For masonry surfaces: Drill a pilot hole using an M5 drill bit for the plastic expansion bolt. Insert the bolt, then use a PH2 screwdriver to secure the bracket with the provided screw. Ensure the plastic expansion bolt is fully inserted before fastening the bracket.

2. 2 Install Batteries: Unscrew the battery cover using a PH2 screwdriver. Install AA batteries, then close and secure the battery cover with the screw.

3. 3 Mount the Blind: Align the top rail of the Smart Blind Lite with the installed brackets. Push the blind upwards until it clicks into place, indicating it is secured. To uninstall, push the button on the brackets and pull the blind down.

Set the Bottom Position

You can set a custom resting position for the bottom of your Smart Blind Lite.

1. 1 Press the UP button to retract the blind to its highest position. The blind will return to the zero percent position.
2. 2 Press the DOWN button to extend the blind. Stop the blind at your desired position by pressing the setting/stop button.
3. 3 To set this position: Hold the bottom sensor with your finger, then press and release the DOWN button. Immediately after, release your finger from the bottom sensor. This position is now saved as the preset bottom position. The Smart Blind Lite will automatically stop here when extending in the future.

Note: To clear the currently set bottom position, press and hold the DOWN button on the smart blind for 5 seconds.

For a visual guide, scan the QR code to watch the instruction video on YouTube. [QR code placeholder - video link would be here if available]

Local Using of Smart Blind Lite

Optimum Height

The ThirdReality Smart Blind Lite supports a maximum height of 72 inches.

Local Control

The Smart Blind Lite can be controlled using a separate remote (sold separately) or via the three control buttons located on the bottom rail.

Pairing with Different Brands

Pairing with Amazon Echo

Compatible Devices: Echo V4, Echo Plus V1 & V2, Echo Studio, Echo Show 10 Gen2 & Gen3

App: Amazon Alexa App

[Alexa Logo Placeholder]

Pairing Steps:

1. 1 Long press the setting button on the blind for more than 5 seconds until the LED light flashes rapidly in red, indicating it is in pairing mode.
2. 2 Before pairing, ensure your Echo devices are updated to the latest version. Say, "Alexa, discover my devices." Alternatively, open the Alexa App, navigate to the device page, tap "+", choose "Add Device", select "other" (by sliding down), and tap "DISCOVER DEVICES". Wait a few seconds for the Smart Blind to be paired to Alexa.
3. 3 After successful pairing, you can control the blinds via voice commands and the Alexa App.

Using Smart Blind Lite with Alexa

Voice Control

• "Alexa, turn on / off first blind."
• "Alexa, set / turn on / turn off / turn up / turn down / open / close first blind to 50%."

Routines

You can create routines in the Alexa App to automate the Smart Blind. For example, use a motion sensor as a trigger to open the blind upon entering a room, or set routines to open/close the blind at sunrise or sunset.

Note: Certain voice commands cannot interrupt others. For instance, "Alexa, turn on first blind" cannot be interrupted by "Alexa, turn off first blind," and vice versa. Similarly, "Alexa, set first blind to 80%" can be interrupted by "Alexa, set first blind to 20%."

Pairing with Eero

Compatible Devices: Eero 6 & Eero 6 Pro

App: Eero App, Alexa App

[Eero Logo Placeholder] [Alexa Logo Placeholder]

Pairing Steps:

1. 1 Ensure your Eero App account is logged in and the gateway is properly connected.
2. 2 Open the Alexa App, register your account, and enable the Eero Skill.
3. 3 Long press the setting button on the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating pairing mode.
4. 4 Before pairing, ensure Echo devices are updated. Say, "Alexa, discover my devices." Or, open the Alexa App, go to the device page, tap "+", choose "Add Device", select "other", and tap "DISCOVER DEVICES". Wait for the smart blinds to pair with Alexa.
5. 5 After successful pairing, you can control the blinds via voice and the App.

Pairing with SmartThings

Compatible Devices: SmartThings Hub 2015&2018, Aeotec

App: SmartThings App

[SmartThings Logo Placeholder]

Pairing Steps:

1. 1 Long press the setting button on the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating pairing mode.
2. 2 Open the SmartThings App, tap "+" on the top right, click "Add Devices", and choose "Scan nearby".
3. 3 After successful pairing, the device will be displayed as "Third Reality Smart Blind" on the page.
4. 4 You can now control the Smart Blind from its details page.
5. 5 Enhance your Smart Blind's functionality by adding automations within the SmartThings App.

Pairing with Home Assistant

Pairing Steps:

1. 1 Long press the setting button on the blinds for more than 5 seconds until the LED flashes rapidly in red, indicating pairing mode.
2. 2 Ensure your Home Assistant Integrations ZigBee Home Automation Setup is ready, then click "+ Add Device" on the Device Page.
3. 3 After pairing, the device will be shown as "Third Reality, Inc 3RSB015BZ" on the page.
4. 4 Navigate back to the "Devices & Services" page. Click the device list under the "HubZ Smart Home Controller" button to find your Smart Blind. Click to enter the control interface to operate it.
5. 5 You can add "Automated Actions" and check device status on the "Device" page.

Pairing with Third Reality

ZigBee Hub Prepare: Third Reality Smart Hub

App: Third Reality App

[Third Reality Logo Placeholder]

Pairing Steps:

1. 1 Long press the setting button on the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating pairing mode.
2. 2 Open the Third Reality App, go to the device page, tap "+", select the Hub, choose "Smart Blind", and then click "Pair".
3. 3 After successful pairing, tap "Complete" to return to the main interface.
4. 4 On the device page, tap the "Smart Blind" icon to view details such as Battery status and History Records. Follow the on-screen instructions to control the Smart Blind.

Using Smart Blind Lite with Third Reality Hub

Enable Alexa Skill:

After adding the Smart Blind Lite to your Third Reality Smart Hub, enable the Third Reality Skill in Alexa. Then, tap "DISCOVER DEVICES" in your Alexa App. You can now use voice commands or create routines in Alexa to control the Smart Blind.

Pairing with Hubitat

Website: http://find.hubitat.com/

Pairing Steps:

1. 1 Long press the setting button on the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating pairing mode.
2. 2 Log in to the Hubitat website and click "Connect to Hub".
3. 3 After pairing with the Hub, choose "Devices", then click "Discover Devices", tap "ZigBee", and choose "Start ZigBee Pairing".
4. 4 Upon successful pairing, the device will appear as "ThirdReality Smart Blind". Click "Label" to rename it and then tap "save".
5. 5 Navigate to the Device page. You will see the Smart Blind. Click on it to access controlling buttons like "Close", "Open", "Set Level", and "Pause".

Troubleshooting

1. 1 Factory Reset: Press and hold the setting button (marked with a square symbol ⏹️) for more than 5 seconds until the LED light flashes rapidly red. This indicates pairing mode. A factory reset will revert the preset bottom position to the default 72 inches, requiring you to set your desired bottom position again.
2. 2 Fail to pair with Echo:
   • Ensure your Echo Speaker is compatible with the Smart Blind Lite (Echo 4th Gen, Echo Plus 1st/2nd Gen, Echo Show 10 2nd/3rd Gen, Echo Studio) and is updated to the latest version.
   • Verify that your Echo devices are properly set up before attempting to add the Smart Blind Lite.
   • Reboot the Echo Speaker by unplugging its power adapter, waiting a few seconds, and plugging it back in. Then, try pairing the Smart Blind Lite again.
   • Factory reset the Echo Speaker: Press and hold the Action button for 25 seconds. The light ring will pulse orange, then turn off. Wait for it to turn blue, then orange again, indicating setup mode. Try pairing the Smart Blind Lite again.
3. 3 Smart Blind Lite is not responding after pairing with Echo device:
   • Check the LED indicator status. Blinking once every 3 seconds means it's offline. Reboot the Echo Speaker and factory reset the Smart Blind Lite, then re-pair them.
   • If the issue persists, try deregistering the Echo Speaker from your account and then re-registering it before attempting to pair the Smart Blind Lite again.
4. 4 How to change the bottom position of the Smart Blind Lite:

   Press the UP button to retract the blind to its highest position (zero percent). Press the DOWN button to extend the blind. Stop the bottom rail at your desired position by pressing the setting/stop button. To set this position: Hold the bottom sensor with your finger, press and release the DOWN button, then release your finger from the bottom sensor. This position is now saved. The Smart Blind Lite will stop here automatically when extending.

5. 5 The "up" and "down" buttons of Smart Blind Lite reverse to the actual movement: When this occurs, press the "Up" button to move the blind to its lowest position. After reaching the lowest point, it will continue to the highest position. The "Up" and "Down" buttons should now correspond correctly with the actual movement direction.
6. 6 Press button no response after installation: Please confirm that the batteries are installed correctly.
7. 7 How to stop the Smart Blind Lite when it's extending/retracting: You can stop the blind by pressing the Stop button on the bottom rail, using the remote, or via the Third Reality App. You cannot stop the extending/retracting action using the Up/Down buttons on the rail or remote, nor with voice commands like "turn On/Off".

FCC Regulatory Conformance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty information, please visit www.3reality.com/devicesupport.

For customer support, please contact us at info@3reality.com or visit www.3reality.com.

For help and troubleshooting related to Amazon Alexa, please refer to the Alexa app.