Smart Blind Lite User Manual

Product Instruction

THIRDREALITY ZigBee Smart Blind Lite is a smart honeycomb curtain with simple installation and convenient control (both online and offline). It features a thoughtful design on the bottom that can automatically detect the window sill and stop. The Smart Blind Lite is designed to run on Alkaline Batteries, with the drive units located at the bottom for more convenient battery replacement. More intelligent control, such as voice control, app control, creating routines, setting schedules/timers, and setting groups, can be achieved by connecting to compatible gateways. These include Echo devices with built-in Zigbee hubs, SmartThings, Home Assistant, Eero 6 & Eero 6 Pro, Third Reality Hub, and Hubitat.

Product Features

1. Directly work with compatible Echo devices

The Smart Blind Lite is a standard ZigBee device that can directly work with compatible Echo devices featuring a built-in ZigBee hub, including Echo 4th Gen, Echo Plus 1st Gen and 2nd Gen, Echo Show 10 2nd Gen and 3rd Gen, and Echo Studio.

2. Work with multiple platforms.

The Smart Blind Lite can also connect with SmartThings, Home Assistant, Eero 6 & Eero 6 Pro, Third Reality Hub, and Hubitat Elevation.

3. Unique and novel design

The Smart Blind Lite uses a bottom drive design, making daily operation and battery replacement more convenient. With the bottom sensor design, it is easier and more convenient to adjust the height of the blind within 72 inches at any time.

4. No worry about power support

With more than 6 months of battery life using AA batteries, which are cheap and easy to change, there's no need to worry about windows being too high to charge or lacking an outlet. If batteries die, replacement AA batteries are readily available.

5. Functions provided by Alexa App

The Smart Blind Lite works with Alexa and offers multiple functions, including schedules, groups, and routines. Users can set the blind to open or close according to sunset or sunrise times, etc.

Product Details

LED Indicator and Buttons

A diagram shows the top part of the blind with an LED indicator and three buttons labeled 'Up', 'Stop/Reset', and 'Down'.

LED Status & Buttons

• Fast blinking: pairing
• Slow blinking: off-line
• Double blinking: low power
• Up: retract
• Stop/Reset: single press to stop/long press to enter paring mode
• Down: extend

Bottom Sensor

A diagram shows the bottom of the blind with a sensor labeled 'Bottom Sensor'. When the Smart Blind Lite is extending, if the Bottom Sensor hits any surface (like the window sill or your finger), it will stop at this position. The Bottom Sensor is also used to set the bottom position (See P9).

Battery Cover

A diagram shows the battery compartment cover at the bottom of the blind. Pay attention to the positive and negative terminals of the Batteries. Batteries are sold separately.

Included Accessories

• Screw × 2
• Plastic Expansion Bolt × 2
• L Bracket × 2

Installation

THIRDREALITY Smart Blind Lite supports both inside and outside mounts. A pair of L brackets, screws, and plastic expansion bolts are provided. A PH2 screwdriver is required for mounting. For masonry surfaces, prepare an electric drill with an M5 drill bit. Ensure the THIRDREALITY logo of the Smart Blind Lite and the button of the L brackets face inward when installed.

Step 1: Choose inside or outside mount

Choose inside or outside mount as needed. Ensure your window recess meets the minimum depth requirement of 2 inches for an inside mount. For an outside mount, if you want the entire window exposed when the smart blind Lite is fully closed, ensure you have at least 4.3 inches of flat space above the window.

a. Inside Mount

A diagram illustrates an inside mount for a window, showing measurements of 6 inches from the sides and a minimum recess depth of 2 inches. An electric drill is depicted.

According to the diagram, measure and mark the position. For a wooden surface, use a PH2 screwdriver and the provided screws to secure the bracket. For a masonry surface, use an M5 drill bit to drill a pilot hole for the provided plastic expansion bolt. Insert the plastic expansion bolt into the pilot hole, then use a PH2 screwdriver to secure the bracket with the provided screw.

A series of diagrams show the process of measuring, marking, drilling, and attaching brackets to a window frame for an inside mount. One diagram shows a drill bit for masonry.

b. Outside Mount

According to the diagram, measure and mark the corresponding position.

A diagram shows an outside mount for a window, with measurements of 6 inches from the sides and the total length of the blind. Another diagram shows the placement of brackets for an outside mount.

For a wooden surface, use a PH2 screwdriver and the provided screw to secure the bracket. For a masonry surface, use an M5 drill bit to drill a pilot hole for the provided plastic expansion bolt. Insert the plastic expansion bolt into the pilot hole, then use a PH2 screwdriver to secure the bracket with the provided screw. Insert the plastic expansion bolt into the hole, then use a PH2 screwdriver to fasten the bracket with the provided screw.

Step 2: Install Batteries

Unscrew the battery cover with the PH2 screwdriver, install AA batteries, close, and secure the battery cover with the screw.

A close-up diagram shows how to open the battery cover, insert AA batteries, and reattach the cover.

Step 3: Mount the Blind

Firstly, align the outside of the top rail with the brackets, then push up the Smart Blind Lite to get it into place. The bracket's button pops up and makes a clicking sound, indicating it is secured. To uninstall the Smart Blind Lite, push the button of the brackets and then pull down the Smart Blind Lite.

Diagrams illustrate the process of attaching the blind to the mounted brackets.

Note: Please shake the blind to ensure the blind and the Extension Bracket are in close contact.

Step 4: Set Bottom Position

Set the position where you want the bottom of your Smart Blind Lite to rest. Press the UP button and let the Smart Blind Lite retract to the highest position; it will return to the original zero percent. Press the DOWN button to let the Smart Blind Lite extend. Stop the bottom rail at your desired position by pressing the setting/stop button. Now, hold up the bottom sensor with your finger first, then press the DOWN button. After that, release the DOWN button first, then release the bottom sensor. This position is now set as the preset bottom position, and the Smart Blind Lite will stop at this position automatically next time when extending.

Note: Press and hold the DOWN button on the smart blind for 5 seconds to clear the currently set bottom position.

A QR code is provided to watch an instruction video on YouTube. Scan it with your mobile device.

Local Using of Smart Blind Lite

Optimum height:

The height of the ThirdReality Smart Blind Lite supports up to 72 inches at maximum.

Local Control:

You can use the remote (sold separately) or the 3 control buttons on the bottom rail to control the Smart Blind Lite.

Pairing with Different Brands

Pairing with Amazon Echo

Compatible Device: Echo V4, Echo Plus V1 & V2, Echo Studio, Echo Show 10 Gen2 & Gen3

App: Amazon Alexa App

Description of the Amazon Alexa logo.

Pairing Steps:

1. Long press the setting button of the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
2. Before pairing, ensure the Echo devices have been updated to the latest version. Then, directly say 'Alexa, discover my devices'. Alternatively, open the Alexa App, go to the device page, tap '+' on the top right, choose 'Add Device', then click 'other' by sliding down, and tap 'DISCOVER DEVICES'. Wait for a few seconds, and the Smart Blind will be paired to Alexa.
3. After successful pairing, you can control the blinds by voice and App.

Using Smart Blind Lite

Optimum Height:

The height of the ThirdReality Smart Blind Lite supports up to 72 inches at maximum.

Voice Control

• 'Alexa, turn on / off first blind.'
• 'Alexa, set / turn on / turn off / turn up / turn down / open / close first blind to 50%.'

Routines

You can create routines in your Alexa App to turn on/off the Smart Blind or set any open percentage. For example, you can create a routine with a motion sensor as a trigger to open the Smart Blind when you enter the room, or you can create a routine to open/close your Smart Blind at sunrise/sunset.

Note: A voice command 'Alexa, turn on first blind.' cannot be interrupted by a voice command 'Alexa, turn off first blind.', and vice versa. A voice command 'Alexa, set first blind to 80%.' can be interrupted by another voice command 'Alexa, set first blind to 20%.'

Pairing with Eero

Compatible Devices: Eero 6 & Eero 6 Pro

App: Eero App, Alexa App

Description of the Eero logo.

Description of the Amazon Alexa logo.

Pairing Steps:

1. Make sure that the Eero App account is logged in and the gateway is properly connected.
2. Open the Alexa App and register your account, then enable the Eero Skill for the Alexa App.
3. Long press the setting button of the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
4. Before Pairing, ensure the Echo devices have been updated to the latest version, then directly say 'Alexa, discover my devices'. Or you can open the Alexa App, go to the device page, tap '+' on the top right, choose 'Add Device', then click 'other' by sliding down, and tap 'DISCOVER DEVICES'. Wait for a few seconds, and the smart blinds will be paired to Alexa.
5. After the pairing is successful, you can control the blinds by voice and App.

Pairing with SmartThings

Compatible Devices: SmartThings Hub 2015&2018, Aeotec

App: SmartThings App

Description of the SmartThings logo.

Pairing Steps:

1. Long press the setting button of the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
2. Open the SmartThings App, tap '+' on the top right. Then click 'Add Devices', and choose 'Scan nearby'.
3. After the pairing is successful, it will be displayed as 'Third Reality Smart Blind' on the page.
4. You can control the Smart Blind on its details page now.
5. You can also make your Smart Blind smarter by adding automations in the SmartThings App.

Pairing with Home Assistant

Pairing Steps:

1. Long press the setting button of the blinds for more than 5 seconds until the LED flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
2. Make sure Home Assistant Integrations ZigBee Home Automation Setup is ready, then click '+ Add Device' on the Device Page.
3. After the pairing is successful, it will be shown as 'Third Reality, Inc 3RSB015BZ' on the page.
4. Back to the 'Devices & Services' page, click the device list under the 'HubZ Smart Home Controller' button, then you can find the Smart Blind added previously. Click to enter the control interface to operate the Smart Blind.
5. You can add 'Automated Actions' and check device status on the 'Device' page.

Pairing with Third Reality

ZigBee Hub Prepare: Third Reality Smart Hub

App: Third Reality App

Description of the Third Reality logo.

Pairing Steps:

1. Long press the setting button of the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
2. Open the Third Reality App, go to the device page, tap '+', which belongs to the Hub, choose 'Smart Blind', then click 'Pair'.
3. After the pairing is successful, tap 'Complete', then go back to the main interface.
4. Tap the 'Smart Blind' icon on the device page; you can see the details, such as Battery, History Records, etc. Follow the instructions to control the Smart Blind.

Using Smart Blind Lite

Enable Alexa Skill:

After adding the Smart Blind Lite to your Third Reality Smart Hub, enable the Third Reality Skill and tap 'DISCOVER DEVICES' in your Alexa App. Now you can use the voice assistant or create routines in your Alexa App to control the Smart Blind.

Pairing with Hubitat

Website: http://find.hubitat.com/

Pairing Steps:

1. Long press the setting button of the blinds for more than 5 seconds; the LED light flashes rapidly in red, indicating that the Smart Blind is in pairing mode.
2. Log in to the website, click 'Connect to Hub'.
3. After pairing with the Hub, choose 'Devices', then click 'Discover Devices', Tap 'ZigBee', and Choose 'Start ZigBee Pairing'.
4. After the pairing is successful, it will show on the page as 'ThirdReality Smart Blind'. Click 'Label' to rename the Smart Blind and then tap 'save'.
5. Go to the Device page; you will see the Smart Blind and then click in. You will see the controlling buttons of 'Close', 'Open', 'Set Level', and 'Pause'.

Troubleshooting

1. Factory Reset

Press and hold the setting button of the blinds for more than 5 seconds until the LED light flashes rapidly in red, indicating that the Smart Blind Lite is in pairing mode. Every time you factory reset the Smart Blind Lite, your preset bottom position will be reset to the default (72 inches); you need to reset your desired bottom position.

2. Fail to pair with Echo

Make sure your Echo Speaker is compatible with the Smart Blind Lite (including Echo 4th Gen, Echo Plus 1st Gen and 2nd Gen, Echo Show 10 2nd Gen and 3rd Gen, and Echo Studio) and updated to the latest version.

• Please ensure your Echo devices are set up before adding the Smart Blind Lite.
• Reboot the Echo Speaker by unplugging the power and plugging it back in, then try to pair the Smart Blind Lite with it again.
• Factory reset the Echo Speaker (Press and hold the Action button for 25 seconds. The light ring will pulse orange, then turn off. Wait for the light ring to turn back on and turn blue. The light ring then turns orange again, and the devices enter the setup mode), then try to pair the Smart Blind Lite with it again.

3. Smart Blind Lite is not responding after pairing with Echo device

• Check the LED indicator status of the Smart Blind Lite; blinking once every 3 seconds means it is offline. Please reboot the Echo Speaker and factory reset the Smart Blind Lite, then pair the Smart Blind Lite with the Echo Speaker.
• If it still does not work, please try to deregister the Echo Speaker and register it back in, then try to pair the Smart Blind Lite with it.

4. How to change the bottom position of the Smart Blind Lite

Press the UP button and let the Smart Blind Lite retract to the highest position; it will return to the original zero percent. Press the DOWN button to let the Smart Blind Lite extend. Stop the bottom rail at your desired position by pressing the setting/stop button. Now, hold up the bottom sensor with your finger first, then press the DOWN button. After that, release the DOWN button first, then release the bottom sensor. You have now set this position as the preset bottom position, and the Smart Blind Lite will stop at this position automatically next time when extending.

5. The "up" and "down" buttons of Smart Blind Lite reverse to the actual movement

When this happens, press the "Up" button and let the Smart Blind move to the lowest position. After it reaches the lowest position, it will continue moving to the highest position. Meanwhile, the "Up" and "Down" buttons will correspond with the actual direction of moving.

6. Press button no response after installation

Please confirm whether the batteries are installed correctly.

7. How to stop the Smart Blind Lite when it's extending/retracting?

You can stop the Smart Blind Lite from extending/retracting with a stop command by pressing the Stop button on the bottom rail or the remote, or in your Third Reality App. You cannot stop it from extending/retracting with commands like pressing Up/Down on the bottom rail or the remote (or in the App), nor with a voice command like 'turn On/Off the first blind'.

FCC Regulatory Conformance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty, please visit www.3reality.com/devicesupport

For customer support, please contact us at info@3reality.com or visit www.3reality.com

For help and troubleshooting related to Amazon Alexa, visit the Alexa app.