THIRDREALITY Smart Blind User Guide

Product Instruction

THIRDREALITY ZigBee Smart Blind is a smart honeycomb curtain designed for simple installation and convenient control, functioning both online and offline. It is available in 20 sizes to fit various window widths. The blind features an automatic bottom detection mechanism that stops it upon reaching the window sill. It operates on Alkaline Batteries, with the drive unit located at the bottom for easy battery replacement. The Smart Blind supports remote control, local control, and advanced intelligent control through voice commands, app control, routines, schedules, timers, and group settings when connected to compatible gateways such as Amazon Echo devices with built-in Zigbee hubs, SmartThings, Home Assistant, Eero 6 & Eero 6 Pro, Third Reality Hub, and Hubitat.

Product Features

• Directly work with compatible Echo devices: It is a standard ZigBee device compatible with Echo devices featuring a built-in Zigbee hub, including Echo (4th Gen), Echo Plus (1st & 2nd Gen), Echo Show 10 (2nd & 3rd Gen), and Echo Studio.
• Work with multiple platforms: Connects with SmartThings, Home Assistant, Eero 6 & Eero 6 Pro, Third Reality Hub, and Hubitat.
• Unique and novel design: Features a bottom drive design for convenient operation and battery replacement. The bottom sensor simplifies height adjustment up to 72 inches at any time.
• No worry about power support: Operates on AA batteries with over 6 months of life support, offering a convenient and readily available power solution without reliance on outlets.
• Functions provided by Alexa App: Supports Alexa integration with functions like scheduling, grouping, and routines, allowing blinds to open/close based on sunset/sunrise times.
• Good shading and cordless design: Features an aluminum coating for thermal insulation and sound absorption, providing privacy and room darkening. It is a cordless design, making it safe for children and pets.

Product Details

Visual representation of the Smart Blind with key components:

• LED Indicator: Located on the blind body.
• Up/Setting/Down Buttons: Control buttons on the blind body.
• LED Status:
  • Pairing: Fast blinking (twice per second).
  • Off-line: Slow blinking (once every three seconds).
  • Low power: Double blinking (two short blinks every two seconds).
• Bottom Sensor: Located at the bottom of the blind. When triggered while the blind is moving down, it stops the blind and sets that position as 100%.
• Battery Cover: Located at the bottom, requires 4 AA batteries. Ensure correct polarity when installing batteries.

Included Components

The package includes:

• L Brackets (x2)
• U Brackets (x2)
• Screws (x3)
• Plastic Expansion Bolts (x3)
• AA Batteries (x6) - Note: 4 AA batteries are required for the blind, 2 for the remote.

Smart Blind Remote: Features Up, Stop, and Down buttons. Requires 2x AA batteries.

Smart Blind Installation

THIRDREALITY Smart Blind supports both inside and outside mounts. The package provides L-shaped and U-shaped brackets, screws, and plastic expansion bolts. A PH2 screwdriver is required for mounting. For masonry surfaces, an M5 drill bit is recommended. Ensure the THIRDREALITY logo and bracket orientation are correct during installation.

Mounting Options

• Inside Mount: Suitable if the window sill is 2 inches deep or more.
• Outside Mount: Recommended if the window sill is less than 2 inches deep. For full window exposure when closed, ensure a distance greater than 4.3" from mount holes to the window bottom.

Installation Steps

1. Prepare Mounts

Measure and mark bracket positions according to the chosen mount type (inside or outside). For wooden surfaces, use a PH2 screwdriver and provided screws. For masonry surfaces, drill a pilot hole with an M5 drill bit, insert plastic expansion bolts, and then secure the bracket with a PH2 screwdriver.

2. Install Batteries

Unscrew the battery cover using a PH2 screwdriver. Install 4 AA batteries, ensuring correct polarity. Close and secure the battery cover.

3. Mount the Blind

Outside Mount: Align the top rail with the brackets and push the blind upwards until it clicks into place. To uninstall, push the bracket button and pull the blind down.

Inside Mount: Align the top rail inside the brackets and push the blind upwards until it clicks into place. To uninstall, push the bracket button and pull the blind down.

Note: Gently shake the blind to ensure it is securely in contact with the brackets.

4. Set Bottom Position

To set the resting position for the bottom of the Smart Blind:

1. Press the ⬆️ button on the blind or remote to retract it to the top position.
2. Press the ⬇️ button on the blind or remote to extend it. The blind will stop automatically when the Bottom Sensor detects a surface (like the window sill or your finger). This position will be saved as the 100% position for future automatic stops when extending.
3. Alternatively, stop the blind at the desired position, hold the bottom sensor with your finger, and press the ⬇️ button on the blind to set this as the bottom position.

Note: The bottom sensor can only be triggered when the blind is moving down.

Local Using of Smart Blind

Optimum Height

The THIRDREALITY Smart Blind supports a maximum height of 72 inches. It will automatically stop and set the position as 100% when the bottom sensor is triggered by a window sill or other obstruction. The next time the blind is lowered via voice control or the Alexa App, it will extend to this saved position.

Local Control

Control buttons are located on the blind body and the IR remote. The Smart Blind also supports App and voice control through pairing with multiple devices. A separate manual is available for pairing instructions.

Pairing with Different Brands

Pairing with Amazon Echo

Compatible Devices: Echo V4, Echo Plus V1 & V2, Echo Studio, Echo Show 10 Gen2 & Gen3

App: Amazon Alexa App

[Amazon Alexa logo]

Pairing Steps:

1. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
2. Ensure your Echo devices are updated to the latest version. Say "Alexa, discover my devices." Alternatively, open the Alexa App, go to the device page, tap "+", choose "Add Device", then "other", and finally "DISCOVER DEVICES". Wait for the Smart Blind to be paired.
3. After successful pairing, control the blinds via voice and App.

Pairing with Eero

Compatible Devices: Eero 6 & Eero 6 Pro

App: Eero App, Alexa App

[Eero logo] [Amazon Alexa logo]

Pairing Steps:

1. Ensure your Eero App account is logged in and the gateway is properly connected.
2. Open the Alexa App, register your account, and enable the Eero Skill.
3. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
4. Ensure Echo devices are updated. Say "Alexa, discover my devices" or use the Alexa App to add the device as described in the Amazon Echo pairing section.
5. After successful pairing, control the blinds via voice and App.

Pairing with SmartThings

Compatible Devices: SmartThings Hub 2015&2018, Aeotec

App: SmartThings App

[SmartThings logo]

Pairing Steps:

1. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
2. Open the SmartThings App, tap "+" on the top right, click "Add Devices", and choose "Scan nearby".
3. Upon successful pairing, the device will be displayed as "Third Reality Smart Blind".
4. Control the Smart Blind from its details page.
5. Add automations in the SmartThings App to enhance functionality.

Pairing with Home Assistant

Pairing Steps:

1. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
2. Ensure Home Assistant Integrations ZigBee Home Automation Setup is ready, then click "+ Add Device" on the Device Page.
3. After successful pairing, it will be shown as "Third Reality, Inc 3RSB015BZ".
4. Navigate to "Devices & Services", click the device list under "HubZ Smart Home Controller", find the Smart Blind, and enter its control interface.
5. Add "Automated Actions" and check device status on the "Device" page.

Pairing with Third Reality

ZigBee Hub Prepare: Third Reality Smart Hub

App: Third Reality App

[Third Reality logo]

Pairing Steps:

1. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
2. Open the Third Reality App, go to the device page, tap "+", choose "Smart Blind", then click "Pair".
3. After successful pairing, tap "Complete" to return to the main interface.
4. Tap the "Smart Blind" icon on the device page to view details like Battery status and History Records. Follow on-screen instructions to control the Smart Blind.

Using Smart Blind with Alexa:

Enable the "Third Reality Skill" in the Alexa App and tap "DISCOVER DEVICES" to control the Smart Blind through Alexa App or Echo Devices.

Pairing with Hubitat

Website: http://find.hubitat.com/

Pairing Steps:

1. Long press the setting button on the blinds for over 5 seconds until the LED flashes rapidly red, indicating pairing mode.
2. Log in to the Hubitat website and click "Connect to Hub".
3. After pairing with the Hub, choose "Devices", click "Discover Devices", tap "ZigBee", and choose "Start ZigBee Pairing".
4. Upon successful pairing, it will appear as "ThirdReality Smart Blind". Click "Label" to rename it and tap "save".
5. On the Device page, select the Smart Blind to access controlling buttons for "Close", "Open", "Set Level", and "Pause".

Troubleshooting

• 1. Factory Reset: Press and hold the [settings button] on the blinds for over 5 seconds until the LED flashes rapidly red.
• 2. Fail to pair with Echo: Ensure your Echo Speaker is compatible (Echo 4th Gen, Echo Plus 1st/2nd Gen, Echo Show 10 2nd/3rd Gen, Echo Studio) and updated. Ensure Echo devices are set up before adding the Smart Blind. Reboot the Echo speaker by unplugging and replugging it. If issues persist, factory reset the Echo speaker (press and hold Action button for 25 seconds) and try pairing again.
• 3. Smart Blind is not responding after pairing with Echo device: Check the LED indicator status (blinking once every 3 seconds means offline). Reboot the Echo speaker and factory reset the Smart Blind, then re-pair. If problems continue, deregister and re-register the Echo speaker.
• 4. Smart Blind does not stop at the preset position: Press the "Up" button to move the blind to the highest position (0%). Then press the "Down" button to extend it. The blind will stop when the bottom sensor is triggered, setting this as the 100% preset bottom position.
• 5. The "up" and "down" buttons of Smart blind reverse to the actual movement: Press the "Up" button to move the blind to the lowest position. It will then continue to the highest position. The "Up" and "Down" buttons will now correspond to the actual direction of movement.
• 6. Press button no response after installation: Confirm batteries are installed correctly.
• 7. Change the 100% position preset:
  • To reset to a higher position: Trigger the bottom sensor again as the blind falls down.
  • To reset to a lower position: When the blind stops at the current 100% position, press the down button twice to move it down. Stop it by triggering the bottom sensor when it reaches the desired new position.
• 8. Control issues with Third Reality hub: If the Smart Blind cannot be controlled to fully close (0%) by dragging the progress bar in the Third Reality app when paired with the Third Reality hub: First, press DOWN in the app to lower the blind, then press UP to raise it to the top position. Alternatively, use the UP button on the Smart Blind or IR remote to move it to the top position. This sets the real 0% position, allowing flawless control in the Third Reality App.

Compliance and Warranty

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

For troubleshooting, warranty, and safety information, visit www.3reality.com/devicesupport.

RF Exposure

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating with any other antenna or transmitter.

Limited Warranty

For limited warranty information, please visit www.3reality.com/devicesupport.

For customer support, contact info@3reality.com or visit www.3reality.com.

For help and troubleshooting related to Amazon Alexa, visit the Alexa app.