SmallRig Side Handle (for Gimbals)
Operating Instruction
Product Overview
The SmallRig Side Handle for Gimbals 2786C is engineered to alleviate arm fatigue and offer accessory mounting points when operating gimbals. Its ergonomic design allows for a two-handed grip, distributing the weight stress more evenly. The foldable design facilitates easy storage and portability. It features an anti-twist plate on the side for secure attachment of stabilizers and cameras in various positions (front, rear, left). The handle connects to the gimbal's base using 1/4"-20 or 3/8"-16 screws and can be mounted on either the left or right side of the stabilizer. The cross arm includes multiple 1/4"-20 threaded holes, ARRI 3/8"-16 threaded holes, and cold shoe mounts for accessories like monitor mounts, magic arms, microphones, and wireless transmitters. A flat-head screwdriver is integrated at the bottom for securing mounting screws.
Safety Guidelines
- Environment: Avoid using the product underwater, in extreme temperatures (freezing or high heat), corrosive environments, or areas with excessive dust. Dry metal parts immediately after contact with liquids to prevent corrosion.
- Load Capacity: Do not exceed the product's maximum weight capacity. Overloading can lead to structural failure, deformation, or accidental drops.
- Cleaning & Maintenance: Clean surfaces with a dry, soft cloth. Avoid using chemicals like alcohol or solvents. Store in dry, ventilated conditions for long-term preservation.
- Structural Integrity: Do not modify the product (e.g., drilling, cutting) as this compromises its structural integrity and increases the risk of drops.
- Malfunctions: Discontinue use immediately if you notice any deformation, unusual noises, or loose components, and contact support.
In the Box
- Handle × 1
- Guarantee Card × 1
Product Details
The product features a rotatable design for easy storage, adjustable by 90 degrees. It includes an anti-twist plate and a 1/4"-20 screw for mounting. The cross arm has 1/4"-20 threaded holes and a 3/8"-16 screw.
[Image Description: A diagram showing the SmallRig Side Handle for Gimbals. Key features are labeled: '1/4"-20 Threaded Hole', '3/8"-16 Screw', 'Anti-Twist Plate', and 'Rotatable Design for Easy Storage'. An arrow indicates the 90-degree rotation.]
[Image Description: Close-up views illustrating the attachment mechanism. The top image shows a 1/4"-20 screw being inserted into a threaded hole, with an arrow indicating the direction. The bottom image shows the screw being tightened with a flat-head screwdriver, with a circular arrow indicating the rotation.]
Easy to Use
The foldable design ensures easy storage. This handle is compatible with DJI, Zhiyun, and Moza handheld gimbals, as well as other cameras or devices featuring a 1/4"-20 or 3/8"-16 threaded hole on the bottom.
[Image Description: A demonstration of the SmallRig Side Handle attached to a camera gimbal, showcasing its use.]
Side Anti-twist Design
The side anti-twist design provides stable installation without deformation. The top of the handle is equipped with 1/4"-20 threaded holes, ARRI 3/8"-16 threaded holes, and cold shoe mounts for attaching monitors, microphones, wireless transmitters, and action cameras.
[Image Description: A camera gimbal with the SmallRig Side Handle attached. The handle is shown mounted on the side of the gimbal, with a camera and accessories mounted on top of the handle. Text indicates 'Ensures the Anti-deflection for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro'.]
Configuration and Compatibility
The handle can be configured for either the right or left hand, offering easier control compared to handheld mode.
Compatibility:
- DJI Ronin-S / Ronin-SC
- DJI RS 2 / RSC 2
- DJI RS 3 / RS 3 Pro / RS 3 Mini
- DJI RS 4 / RS 4 Pro
- DJI RS 4 Mini
- Zhiyun Crane 2S / Crane 2 / Crane V2 Series
- Moza Air 2 / Moza AirCross 2
- Any camera or handheld gimbal with a 1/4"-20 or 3/8"-16 threaded hole on the bottom.
The bottom of the handle features two 1/4"-20 threaded holes for attaching the Mini V-Lock Assembly Kit MD2801B.
[Image Description: Two configurations of the SmallRig Side Handle attached to different gimbal systems, illustrating compatibility and usage.]
Specifications
Product Dimensions: 170.8 x 120.0 x 55.0mm
Package Dimensions: 176.0 x 53.0 x 55.0mm
Product Weight: 296.0 ± 5.0g
Package Weight: 336.0 ± 5.0g
Material(s): Aluminum Alloy, Stainless Steel, Brass, Silicone
[Image Description: Diagrams showing the dimensions of the SmallRig Side Handle in both extended and folded states.]
Manufacturer Information
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Manufacturer Email: support@smallrig.com
Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Certifications: RoHS, CE
Recycling Information: Includes French recycling instructions ('LE TRI FACILE', 'Séparez les éléments avant de trier') and general recycling symbols.
Origin: Made in China
