Fisher-Price Rescue Heroes Hyper Jet HQ
Model: C5959
Website: www.rescueheroes.com
Product Overview
Image: The Fisher-Price Rescue Heroes Hyper Jet HQ toy, a large, futuristic jet vehicle with a cockpit, shown with accompanying figures. The Fisher-Price logo is visible.
This instruction sheet provides essential information for the Fisher-Price Rescue Heroes Hyper Jet HQ. It requires adult assembly and uses three "C" (LR14) and three "AAA" (LR03) alkaline batteries, which are not included. A Phillips screwdriver is needed for battery installation.
Parts List
Diagram showing various toy components labeled with their names.
- Jet Body
- Space Pod
- Stretcher
- Mission Control Console
- 2 Rear Landing Gear (Larger)
- Glider Wing
- Front Landing Gear (Smaller)
- Tough Terrain Vehicle
- 2 Glider Supports
- Cargo Door
- Keytron™ Robot
- 2 Wings
- Ramp
- Hose
- 2 Water Missiles
- Water Cannon Launcher
- Not Shown: Label Sheet
Building the Hyper Jet™
Follow these steps for assembly:
Diagram shows attaching landing gear to the jet body.
Attach the smaller front landing gear and the two larger rear landing gear to the jet body. Turn the jet body upright.
Diagram shows attaching wings to the jet body.
Attach the two wings to the jet body.
Diagram shows inserting the hose into the cargo bay.
Insert the hose into the hole in the cargo bay.
Diagram shows attaching the ramp to the cargo door.
Attach the ramp to the cargo door.
Diagram shows attaching the cargo door.
Position the cargo door near the back of the jet with the ramp facing up. Fit the right side door peg into the right hole in the jet body. Bend the door slightly and fit the left side door peg into the left hole. Rotate the cargo door up to close it.
Diagram shows attaching glider supports.
Attach the two glider supports to the jet body.
Diagram shows fitting the Mission Control Console.
Fit the pegs on the sides of the Mission Central Console into the two grooves on the top of the jet body. Rotate the Mission Central Console down to store it in the jet cargo bay.
Diagram shows attaching the glider wing.
Fit the glider wing onto the two pegs on the glider supports. The glider wing is removable and attaches to the back of most figures.
Diagram shows attaching the space pod.
Press and hold the latch on the jet body. Fit the space pod into the opening at the front of the jet body and release the latch.
Label Decoration
Diagrams showing placement of various labels on the toy.
Ensure the areas where labels will be applied are clean and dry. Apply the labels as shown in the illustrations. For best results, do not attempt to apply a label more than once.
Building the Hyperbot™!
Diagrams showing steps to assemble the Hyperbot figure with the vehicle.
- Detach the space pod by pressing the latch on the jet body.
- Open the canopy, slide a figure into the cockpit, rotate the "arms" towards the front, and close the canopy.
- Fit the post on the bottom of the pod into the rectangular opening on the Tough Terrain Vehicle. Rotate the "head" up over the canopy. Fit the water cannon into the "hand." Place the stretcher on the back of the Tough Terrain Vehicle.
- The Hyperbot™ is now ready for action!
To the Rescue!
Launch the Water Cannon:
Diagram shows inserting a missile into the water cannon.
Insert a water missile into the slot in the water cannon. Press the button on top to launch. IMPORTANT: Use only projectiles supplied with this toy. Do not launch at people or animals or at point blank range.
Using the Glider Wing:
Diagram shows the glider wing attaching to a figure's back.
The glider wing easily detaches from the jet and slides onto the back of most Rescue Heroes® figures, including Keytron™.
Tough Terrain Vehicle:
Diagram shows a figure on the Tough Terrain Vehicle.
The Tough Terrain Vehicle also works as a stand-alone vehicle. Place any figure on top to explore or respond to emergencies.
On Board Storage
Diagram shows storing parts in the cargo bay.
Place the stretcher and tough terrain vehicle into the cargo bay. Slide the two loading ramps into the jet.
Diagram shows closing the cargo door and storing the console.
Close the rear cargo door. Rotate the Mission Central Console into the cargo bay. Reattach the glider wing.
Welcome Aboard the Hyper Jet™ HQ!
Image shows figures interacting with the Mission Central Screen, with speech bubbles.
Hear Keytron™ or Warren Waters™ assign missions on the Mission Central Screen. Connect tethered backpacks to your Robotz figure and minibot, then press the mission button to start the adventure.
Interaction Steps:
- Connect the backpack from the console to your Robotz minibot.
- Slide Keytron™ into the slot in the center of the console.
- Slide the other backpack from the console onto the back of your Robotz figure.
Note: Mission Select™ and Voice Tech™ figures also work with the Mission Central Console.
Keytron™ has a Mission for the Team!
Mission Button: Attach a Roboz figure and a Robotz minibot to the tethered backpacks. Press the Mission button to hear conversations between figures and Warren Waters™ or Keytron™ (if attached). If the light blinks, press again for more mission details. Press without figures to hear Warren Waters™ phrases.
Phrases Button: Press to hear phrases from the computer's voice or Keytron™.
Sound Effects Button: Press to hear realistic sound effects.
On/Off Switch: Slide to ON (I) or OFF (O). Turn off when finished playing. If lights/sounds don't work, toggle the switch. If still not working, replace batteries (see page 8).
Care
Wipe this toy with a clean damp cloth dampened with a mild soap and water solution. Do not immerse the toy.
FCC Note (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or consulting a dealer or experienced radio/TV technician. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Consumer Information
For questions or assistance, contact Fisher-Price Consumer Relations:
- USA: Call toll-free 1-800-432-KIDS (5437), 8 AM - 6 PM EST Mon-Fri. TTY/TDD: 1-800-382-7470. Write to: Fisher-Price Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
- Canada: Call 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
- Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
- Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121. Consumer Advisory Service 1300 135 312.
- New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
- Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Printed in Mexico.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
