Fisher-Price Linkimals Owl (HFT73)
Brand: Fisher-Price
Product Overview
This instruction sheet provides essential information for the Fisher-Price Linkimals Owl toy (Model HFT73). The toy is designed for interactive play and learning.
How to Play: Tip the Owl side to side or press the buttons to play and learn together!
[Description of the Fisher-Price Linkimals Owl toy, featuring colorful buttons labeled A-Z and 1-20.]
Batteries and Power
Battery Requirements: Requires three AA (LR6) batteries. Alkaline batteries are recommended for longer life.
[Diagram showing the battery compartment for three AA batteries, with clear indicators for positive [plus] and negative [minus] terminals.]
Battery Installation:
- Loosen the screw in the battery compartment door and remove the door.
- Remove the exhausted batteries and dispose of them properly.
- Insert three new AA (LR6) alkaline batteries into the battery compartment, ensuring correct polarity ([plus] and [minus] indicators).
- Replace the battery compartment door and tighten the screw.
Operating the Toy:
Slide the power-volume switch to one of three positions: [power-off] (off), [volume-low] (on with low volume), or [volume-high] (on with high volume).
When sounds or lights become faint, slow, or stop, it is time for an adult to change the batteries.
If the toy operates erratically, reset the electronics by sliding the power-volume switch off and then back on again.
Cleaning:
To clean, wipe the toy with a damp cloth. Do not immerse the toy in water.
Battery Safety Information:
- In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin the product. To avoid battery leakage:
- Do not mix old and new batteries or batteries of different types (alkaline, standard carbon-zinc, or rechargeable).
- Insert batteries as indicated inside the battery compartment ([plus] and [minus] terminals).
- Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire, as batteries inside may explode or leak.
- Never short-circuit the battery terminals.
- Use only batteries of the same or equivalent type, as recommended.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the product before charging.
- If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
Environmental Protection: Protect the environment by not disposing of this product or any batteries with household waste. This symbol [recycling symbol] indicates that this product shall not be treated as household waste. Check your local authority for recycling advice and facilities.
More Fun with More Than One!
Linkimals toys are designed to interact with each other, creating a synchronized play experience. Toys are sold separately and subject to availability.
[Images of Fisher-Price Linkimals toys (turtle, penguin, owl) interacting with each other, demonstrating synchronized play.]
How to Sync Your Linkimals:
- Turn the power OFF on each toy.
- Turn the power ON.
- Watch and listen as Linkimals respond to each other in fun ways during play!
Troubleshooting Sync Issues: If, at any time, one of your Linkimals doesn't seem to be interacting with other Linkimals, turn all of them OFF and then back ON again.
Language Note: Linkimals are also available in different languages (sold separately and subject to availability). Linkimals only sync with other Linkimals of the same language.
Company Information and Compliance
United States: Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Consumer Services: 1-800-432-5437. www.service.mattel.com
Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Consumer Services/Service à la clientèle: 1-800-432-5437. www.service.mattel.com.
Great Britain: Mattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK. www.service.mattel.com/uk.
Nederland: Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
South Africa: Mattel South Africa (PTY) LTD, Office 102 13, 30 Melrose Boulevard, Johannesburg 2196.
FCC Statement (United States Only):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
©2021 Mattel. PRINTED IN CHINA
Model Number/Identifier: HFT73-0970-1102778821-DOM
Revision History
Revision | Date | ID# | Changes |
---|---|---|---|
Primary - pr | 11/23/2021 | HFT73-0970-1102778821-DOM | NA |