Declaration of Conformity

Introduction

We hereby declare that the essential requirements set out in CHAPTER 1 of the Radio Equipment Regulations 2017 have been fully fulfilled on our product with indication below:

Manufacturer

Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Address: Room 402, Building 6, No. 8 Huamei Road, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China, 518105

UK Authorized Representative

Name: EVATOST CONSULTING LTD
Address: Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY
Email Address: contact@evatost.com

Product Information

Product Name: Smart Plug
Model No.: ET35
Brand Name: EIGHTREE
Asin: B0C5N2NV1G, B0C5MZG6KF, B0C5N1HBSN

Applied Standards and Test Report

The submitted product has been tested (By Shenzhen LCS Compliance Testing Laboratory Ltd.) with the listed standards and found in compliance with the following standards:

ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 300 328 V2.2.2 (2019-07)
EN IEC 62311: 2020
BS EN 60669-1: 2018
BS EN 60669-2-1: 2004+A1:2009+A12: 2010
BS 1363-3: 2016+A1:2018

UKCA Marking

[UKCA Mark]

Technical Construction File (TCF) and Test Reports

Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document, as well as the test reports, will be kept for a period of at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection.

Declaration Statement

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Company Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Contact Person: Wen Yuanyuan
Position: Manager
Date: 2022/7/27
Signature: Wen Yuanyuan

	Declaration of Conformity - Eightree Smart Plug ET30 Official Declaration of Conformity for the Eightree Smart Plug, Model ET30, confirming compliance with Radio Equipment Regulations 2017 and relevant standards.
	Declaration of Conformity for EIGHTREE Smart Plug ET36 Official Declaration of Conformity for the EIGHTREE Smart Plug, Model ET36, confirming compliance with essential requirements of the Radio Equipment Regulations 2017 and relevant standards.
	Declaration of Conformity - EIGHTREE Smart Plug ET35 Official Declaration of Conformity for the EIGHTREE Smart Plug, Model ET35, manufactured by Shenzhen Realwe Innovation Technology Co., Ltd. This document confirms compliance with essential requirements of EU Directive 2014/53/EU and lists applicable standards and testing reports.
	Declaration of Conformity - Eightree Smart Plug ET32 Declaration of Conformity for the Eightree Smart Plug (Model ET32) by Shenzhen Realwe Innovation Technology Co., Ltd., confirming compliance with EU directives and standards.
	Eightree ET36 Smart Plug Declaration of Conformity Declaration of Conformity for the Eightree ET36 Smart Plug, confirming compliance with essential requirements of Directive 2014/53/EU and listed standards.
	Declaration of Conformity for EIGHTREE Smart Plug ET31 Official declaration of conformity for the EIGHTREE Smart Plug, Model ET31, confirming compliance with EU Directive 2014/53/EU and relevant standards.
	Declaration of Conformity for EIGHTREE ET30 Smart Plug Official Declaration of Conformity for the EIGHTREE ET30 Smart Plug, confirming compliance with EU Directive 2014/53/EU and relevant standards, manufactured by Shenzhen Realwe Innovation Technology Co., Ltd.
	Declaration of Conformity - EIGHTREE Smart Plug ET71 Official Declaration of Conformity for the EIGHTREE Smart Plug, Model ET71, confirming compliance with EU directives and standards.