Declaration of Conformity
We Hereby, Declare that the essential requirements set out in the Directive 2014/53/EU have been fully fulfilled on our product with indication below:
1. Manufacturer
- Name
- Shenzhen Realwe Innovation Technology Co., Ltd.
- Address
- Room 402, Building 6, No. 8 Huamei Road, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China, 518105
2. EU Authorized Representative
- Name
- eVatmaster Consulting Gmbh
- Address
- Raiffeisen Street2B11, 63110 Rodgau, Hessen, Germany
- Email Address
- contact@evatmaster.com
3. Product Info
- Product Name
- Smart Plug
- Model No.
- ET71
- Brand Name
- EIGHTREE
- Asin
- B0D4ZJSJV8 B0D4ZHMB8G B0D52NZHR9
4. Applied Standard and Test Report
The submitted product have been tested (By Shenzhen LCS Compliance Testing Laboratory Ltd.) with the listed standards and found in compliance with the following standard:
| Standard | Version/Date |
|---|---|
| ETSI EN 301 489-1 | V2.2.3 (2019-11) |
| DRAFT ETSI EN 301 489-17 | V3.2.6 (2023-06) |
| EN 55032 | 2015/A1:2020 |
| EN 55035 | 2017/A11:2020 |
| ETSI EN 300 328 | V2.2.2 (2019-07) |
| EN IEC 62311 | 2020 |
| EN IEC 62368-1 | 2020+A11:2020 |
5. CE marking
CE
6. Technical Construction File (TCF) and Test Reports
Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection.
7. Declaration Issuance
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Company Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Contact Person: Wen Yuanyuan
Position: Manager
Date: 2024/10/18
Signature: Wen Yuanyuan
