Declaration of Conformity
We Hereby Declare that the essential requirements set out in the Directive 2014/53/EU have been fully fulfilled on our product with indication below:
1. Manufacturer
Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Address: Room 402, Building 6, No. 8 Huamei Road, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China, 518105
2. UK Authorized Representative
Name: EVATOST CONSULTING LTD
Address: Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY
Email Address: contact@evatost.com
3. Product Information
Product Name: Smart Plug
Model No.: ET30
Brand Name: EIGHTREE
ASINs:
- B0CWV8TDXC
- B0B6ZZK8H6
- B0CHMNVVQP
- B0B6ZYGKC6
- B0B711V8K9
- B0CWV6DY2L
4. Applied Standards and Test Report
The submitted product has been tested (By Shenzhen LCS Compliance Testing Laboratory Ltd.) and found in compliance with the following standards:
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- Draft ETSI EN 301 489-17 V3.2.5 (2022-08)
- ETSI EN 300 328 V2.2.2 (2019-07)
- EN IEC 62311:2020
- IEC 60884-2-5:2017 with IEC 60884-1:2002+ AMD1:2006+AMD2:2013
5. CE Marking
[CE marking]
6. Technical Construction File (TCF) and Test Reports
The ISO requirement for the in-process quality control procedure and the manufacturing process has been met. The technical document and test reports will be retained for at least 10 years after the last product has been manufactured, available for inspection by relevant national authorities of any Member State.
7. Declaration Issuance
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Company Name: Shenzhen Realwe Innovation Technology Co., Ltd.
Contact Person: Wen Yuanyuan
Position: Manager
Date: 2023/9/5
Signature: Wen Yuanyuan