Deli USER MANUAL
Barcode Scanner No. S201
Dear customers, thank you for your products. Deli is committed to providing customers with high-quality products. To ensure best performance, please read this manual carefully before use!
How to use barcode scanner correctly
1. If the barcode is small, the barcode shall be close to the product scanning window. On the contrary, if the barcode is large, the barcode should be slightly away from the product scanning window, so that it is easier to read the barcode correctly.
2. If the barcode has a high reflectance (for example, the barcode surface is coated with film), the barcode should be kept at a certain angle with the product scanning window, so that the barcode can be successfully scanned.
3. When scanning the barcode, it must be aligned and the scanning line must be completely wrapped around the barcode for decoding. It is not allowed to scan only part of the barcode, otherwise there may be error code.
Scanning tips:
- Read the smaller barcode: Keep the scanner close.
- Read the coated barcode and which needs to be far: Keep the inclination angle.
Component description
Scanning window: The part of the scanner that reads the barcode.
Key: The button used to operate the scanner.
Voice hole: Emits audible feedback.
Indicator light: Provides visual feedback.
Prompt mode: Buzzer, indicator light.
Packing list
- Barcode Scanner x1
- USB Cable x1
- Manual x1
Technical parameter
| Input voltage | DC 5V ± 0.5A |
| Operating current | 140mA (typical value) |
| Light source | Red LED |
| Read the smaller barcode | ≥4.7mil |
| Decoding type | AIM-128, Codell, code39, code93, code128, Codabar, Deutsche12, Deutsche14, EAN-8, EAN13, Industrial 2-of-5, Interleaved 2-of-5, ISSN, ISBN, ITF-14, Matrix 2-of-5, MSI- Plessey, Plessey, Standard 2-of-5, UCC/EAN-128, UPC-E, UPC-A |
| Interface type | USB |
| Scanning mode | Manual, continuous |
| The anti-seismic capacity | Can pass the 1.2m free fall test |
| Operating temperature | 0°C~+45°C |
| Storage temperature | -20°C~+60°C |
| Operating humidity | 5%-90% (No condensated water) |
Global configuration code setting
- Restore Factory Defaults
- Allow to read all barcodes (all supported barcodes can be read)
Communication interface settings
- USB-KBW function
- USB virtual serial port function
Reading mode setting
- Manual read mode
- Automatic continuous reading
Troubleshooting
| NO | Problem | Possible causes | Solution |
|---|---|---|---|
| 1 | The interface cable is correctly installed, but the red fill light is not displayed | Scanner not powered on Incorrect connection of interface cable |
Make sure the host is powered on and turned on. When using the USB connector, connect the USB to the USB connector on the computer motherboard. Do not use the extended USB connector and other USB extension cables. Please check whether the cable connection is loose. |
| 2 | There is a red fill light, but the barcode cannot be read | Improper distance between scanner and barcode This type of barcode system is not enabled Bar code is damaged |
Please move the barcode scanner near or far away from the barcode. Open the code system by reading the setting code. Please try scanning other barcodes with the same barcode type. |
| 3 | The scanned data is displayed incorrectly on the host | The height of the barcode scanner is not enough to completely cover the barcode Input method error Other settings have been made to the scanner |
Read the barcode after aligning it. Convert the input method to the standard English input method. Restore the scanner parameters to the factory settings, or contact the manufacturer's service center. |
| 4 | The barcode characters are garbled or wrong | The keyboard country setting of the barcode scanner does not match the country where the keyboard is used | Set the barcode scanner keyboard country to match the country where the keyboard is used. |
| 5 | Other conditions Device cannot be decoded | Transfer error | Turn off the power supply of the equipment, connect the equipment and the scanner correctly, turn on the power supply of the equipment, restore the parameters of the scanning platform to the factory settings and scan the code again. |
Simple maintenance method
1. The dirt and dust on the scanning window sometimes affect the work of the scanner. When cleaning, you should use high-quality facial tissue paper, gently wipe it, and then blow it with a blowing balloon. If the paper with poor quality is used for wiping for a long time, the surface finish of the scanning window will be damaged and the reading effect of the scanner will be affected.
2. The shell of the scanner can be wiped with a soft cleaning cloth. If necessary, a small amount of detergent can be added with water, and then wiped with a soft cloth dipped in water.
Maintenance
Deli is responsible for free maintenance in case of product failure within one year of normal use from the date of purchase. The start date of the warranty period is subject to the purchase date and invoice of the product warranty card.
Please show the product warranty card and invoice during maintenance. Please keep this warranty card properly. If it is lost, it will not be replaced. The purchase date filled in must be consistent with the invoice number, otherwise it will be invalid. This card cannot be altered, otherwise it will be invalid.
For products beyond the warranty period or not subject to free maintenance, the maintenance service center of Deli is still enthusiastic to serve you.
One of the following conditions does not belong to the scope of free maintenance:
- Products beyond the warranty period.
- Those who cannot provide purchase invoices or valid vouchers.
- The appearance is naturally old due to use, and the consumer requires updating.
- Failure caused by failure to use according to the instructions.
- Failure caused by falling or collision.
- Failure caused by self assembly, disassembly and repair.
- Samples and processed products for commercial display and products with performance overload test.
The table of toxic and hazardous substances/elements and their content
| Hazardous and noxious substance or elements | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Part name | ||||||
| Cable | ○ | ○ | ○ | ○ | ○ | ○ |
| Electronic components | X | ○ | ○ | ○ | ○ | ○ |
| Injection molded parts | ○ | ○ | ○ | ○ | ○ | ○ |
○: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products».
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products ». Due to limitations of science and technology development, these toxic or hazardous substances cannot be replaced or reduced for now. Under normal use conditions, no leakage or abrupt change will occur within 10 years, nor will it cause pollution to the environment or damage to people and property.
10 Environment-Friendly Use Period: This mark refers to the environment-friendly use period of electronic and electrical products sold in accordance with the Regulation of the People's Republic of China on Limit on Use of Hazardous Substances in Electric and Electronic Products and General Guidelines of Environment-friendly Use Period of Electronic Information Products.
WARRANTY CARD
| Customer Name: | Phone: | ||
| Address: | |||
| Product Name: | Model: | ||
| Date of Purchase: | Province: | ||
| City/town: | Postcode: | ||
REPAIR FORM
| Date | Description | Maintenance | Replaced parts | Name | Quantity | Technician |
★ For any question, please contact your local dealer.
Related Documents
 |
Deli-E14952 Handheld Barcode Scanner User Manual User manual for the Deli-E14952 handheld barcode scanner, providing setup, operation, specifications, and troubleshooting guidance. |
 |
Deli Stand Barcode Scanner S236 User Manual User manual for the Deli Stand Barcode Scanner model S236. This guide provides detailed information on component description, technical parameters, decoding modes, communication and keyboard settings, troubleshooting, simple maintenance, and warranty information. |
 |
Deli 14970WB Barcode Scanner User Manual User manual for the Deli 14970WB barcode scanner, detailing its features, setup, and operation for efficient data collection and management. |
 |
Deli S227WB Barcode Scanner User Manual User manual for the Deli S227WB Barcode Scanner, covering setup, operation, technical specifications, and troubleshooting. |
 |
Deli 886A/886BW Thermal Label Printer User Manual This user manual provides comprehensive instructions for the Deli 886A and 886BW thermal label printers, covering installation, operation, specifications, interface details, and cleaning procedures. |
 |
Deli-E200P Receipt Printer User Manual Comprehensive user manual for the Deli-E200P receipt printer, detailing its features, setup, and operation. Provided by Deli Group Co., Ltd. |
 |
Deli E3765 Face Recognition Attendance Machine User Manual Comprehensive user manual for the Deli E3765 Face Recognition Attendance Machine, covering installation, setup, registration, operation, and reporting. |
 |
Deli 760DW Thermal Label Printer User Manual and Warranty Information User manual and warranty information for the Deli 760DW Thermal Label Printer, covering packing list, appearance, paper loading, power connection, and tips. Includes warranty card details and special disclaimers. |