Deli Stand Barcode Scanner
User Manual No.S236
CERTIFICATE
Inspector: ____________________
Date of manufacture: ____________________
DELI GROUP CO., LTD.
Deli Industrial Zone, Ninghai County, Ningbo City, Zhejiang Province, China
Made in China
info@nbdeli.com | www.deliworld.com
[paper material] KEEP FOR FUTURE USE
Version: 1.1 | Date: 04-2024
Dear customers, thank you for your products. We are committed to providing our customers with high quality products. To ensure best performance, please read this manual carefully before use!
Component Description
Diagram shows a barcode scanner. Key components:
- Scanning window
- Indicator light
- voice hole (bottom)
- Cable interface
Decoding Mode Switching
Supported modes: Stand Barcode Scanner x1, USB Cable x1, Manual x1
Technical Parameter
| Parameter | Value |
|---|---|
| Input voltage | DC5V±0.5V |
| Operating current | 210mA |
| Standby current | 130mA |
| Light source | White LED |
| Scan barcode category | 1D code, 2D code |
| Reading accuracy | 1D ≥ 5mil, 2D ≥ 10mil |
| Decoding type |
1D: AIM-128, Code 39, Code128, Codabar, EAN-8, EAN-13, ISBN, UCC/EAN-128, UPC-E, UPC-A (Deutsche12, Deutsche14, GS1-RSS14, Gsl-rsslimited, Industrial 2 of 5, Interleaved 2 of 5, ISSN, ITF-14 Matrix 2 of 5, Msi-plessey, Rss-expand, Standard 2 of 5, Code 11, Code 93) 2D: QRCode, Data Matrix, (PDF417, Micro QR) |
| Operating temperature | 0°C ~ +45°C |
| Storage temperature | -20°C ~ +60°C |
| Operating humidity | 5% ~ 90% (No condensed water) |
| Prompt mode | Buzzer, indicator light |
| Interface type | USB |
| Scanning mode | Sensing mode |
| The anti-seismic capacity | Can pass the 1.2m free fall test |
Global Configuration Code Setting
- Barcode representing 'Restore Factory Defaults'
- Barcode representing 'Allow to read all barcodes' (all supported barcodes can be read)
Communication Interface Settings
- Barcode representing 'USB function'
- Barcode representing 'USB virtual serial port function'
Keyboard Mode Settings
- Barcode representing 'Keyboard case control'
- Barcode representing 'Forced case interchange of letters'
- Barcode representing 'Uppercase mode'
- Barcode representing 'Lower case mode'
Common Terminator Settings
- Barcode representing 'Do not add terminators'
- Barcode representing 'Allow add terminators'
- Barcode representing 'Add carriage return terminator'
- Barcode representing 'Add TAB terminator'
- Barcode representing 'Add carriage return line break terminator'
Decode Sound Settings
1. Turn on decoding sound / Turn off decoding sound
- Barcode representing 'Turn on decoding sound'
- Barcode representing 'Turn off decoding sound'
2. Sound type
- Barcode representing 'Type1'
- Barcode representing 'Type2'
- Barcode representing 'Type3'
Display Program Version Number
Barcode representing 'Display program version number'
Website QR Settings
- Barcode representing '*Open'
- Barcode representing 'Close'
Troubleshooting
| NO. | Problem | Possible causes | Solution |
|---|---|---|---|
| 1 | The interface cable is correctly installed, but the white fill light is not displayed | Scanner not powered | Make sure the host is powered on and turned on. When using the USB connector, connect the USB to the USB connector on the computer motherboard. Do not use the extended USB connector and other USB extension cables. |
| 2 | There is a white fill light, but the barcode cannot be read | Incorrect connection of interface cable | Please check whether the cable connection is loose. |
| This type of barcode system is not enabled | Open the code system by reading the setting code. | ||
| Bar code is damaged | Please try scanning other barcodes with the same barcode type. | ||
| Improper distance between scanner and barcode | Please move the barcode scanner near or far away from the barcode. | ||
| The height of the barcode scanner is not enough to completely cover the barcode | Read the barcode after aligning it. | ||
| 3 | The scanned data is displayed incorrectly on the host | Input method error | Convert the input method to the standard English input method. |
| 4 | The barcode characters are garbled or wrong | Other settings have been made to the scanner | Restore the scanner parameters to the factory settings, or contact the manufacturer's service center. |
| The keyboard country setting of the barcode scanner does not match the country where the keyboard is used | Set the barcode scanner keyboard country to match the country where the keyboard is used. | ||
| 5 | Other conditions cannot be decoded | Device transfer error | Turn off the power supply of the equipment, connect the equipment and the scanner correctly, turn on the power supply of the equipment, restore the parameters of the scanning platform to the factory settings and scan the code again. |
Simple Maintenance Method
- The dirt and dust on the scanning window sometimes affect the work of the scanner. When cleaning, you should use high-quality facial tissue paper, gently wipe it, and then blow it with a blowing balloon. If the paper with poor quality is used for wiping for a long time, the surface finish of the scanning window will be damaged and the reading effect of the scanner will be affected.
- The shell of the scanner can be wiped with a soft cleaning cloth. If necessary, a small amount of detergent can be added with water, and then wiped with a soft cloth dipped in water.
Maintenance
Our company is responsible for free maintenance in case of product failure within one year of normal use from the date of purchase.
The start date of the warranty period is subject to the purchase date and invoice of the product warranty card.
Please show the product warranty card and invoice during maintenance.
Please keep this warranty card properly. If it is lost, it will not be replaced. The purchase date filled in must be consistent with the invoice number, otherwise it will be invalid.
This card cannot be altered, otherwise it will be invalid. For products beyond the warranty period or not subject to free maintenance, the maintenance service center of our company is still enthusiastic to serve you.
One of the following conditions does not belong to the scope of free maintenance:
- Products beyond the warranty period.
- Those who cannot provide purchase invoices or valid vouchers.
- The appearance is naturally old due to use, and the consumer requires updating.
- Failure caused by failure to use according to the instructions.
- Failure caused by falling or collision.
- Failure caused by self assembly, disassembly and repair.
- Samples and processed products for commercial display and products with performance overload test.
The Table of Toxic and Hazardous Substances/Elements and Their Content [note]
| Part name | Hazardous and noxious substance or elements | |||||
|---|---|---|---|---|---|---|
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE | |
| Cable | O | O | O | O | O | O |
| Electronic parts | X | O | O | O | O | O |
| Injection molded parts | O | O | O | O | O | O |
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products».
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products». Due to limitations of science and technology development, these toxic or hazardous substances cannot be replaced or reduced for now. Under normal use conditions, no leakage or abrupt change will occur within 10 years, nor will it cause pollution to the environment or damage to people and property.
WARRANTY CARD
| Customer Name | [Customer Name] | Phone | [Phone] | Postcode | [Postcode] |
| Mailing Address | [Mailing Address] | ||||
| Product Name | [Product Name] | Model | [Model] | Date of Purchase | [Date of Purchase] |
| Province | [Province] | City/Town | [City/Town] | ||
REPAIR FORM
| Date | Description | Replaced parts | Maintenance Technician | |
|---|---|---|---|---|
| Name | Quantity | |||
| [Date] | [Description] | [Name] | [Quantity] | [Maintenance Technician] |
| [Date] | [Description] | [Name] | [Quantity] | [Maintenance Technician] |
| [Date] | [Description] | [Name] | [Quantity] | [Maintenance Technician] |
| [Date] | [Description] | [Name] | [Quantity] | [Maintenance Technician] |
★ For any question, please contact your local dealer.
