SilverCrest Activity Tracker (IAN 289546) User Manual and Safety Guide

Introduction

We congratulate you on the purchase of your new SilverCrest Activity Tracker. This manual provides important information regarding safety, usage, and disposal. Please familiarize yourself with all instructions before use.

Intended Use

The activity tracker is an information electronics product designed to track steps, distance, calories, and sleep duration. It is compatible with iOS (version 7.0 and higher) and Android™ (version 4.4 and higher) devices via Bluetooth® v4.2. It is intended for private use only.

Technical Data

• Charging Voltage: 5V
• Charging Current: approx. 55 mA
• Bluetooth Specification: Version 4.2
• Bluetooth Range: approx. 10 meters
• Supported Bluetooth Profiles: BLE (Bluetooth Low Energy*)
• Sensors: Gravity Sensor, UV Sensor
• Compatibility: Android 4.4 or above, iOS 7.0 or above
• Battery Type: Lithium polymer rechargeable battery, 3.8V, 70 mAh
• Operating Time: approx. 4 weeks
• Charging Time: approx. 2.5 hours
• Protection Class: IP67
• Working Temperature: +0°C to +45°C
• Storage Temperature: -20°C to +60°C
• Humidity (Nocondensation): 25 to 90%
• Dimensions (W x D x H): approx. 251 x 22 x 10.3 mm
• Weight: approx. 24.1 g
• Frequency Bands: 2402 MHz ~ 2480 MHz
• Maximum Power Transmitted: <0 dbm

General Safety Instructions

Please read all safety information and instructions before using the product. Failure to observe safety advice and instructions may cause fire and/or serious injuries.

Warnings and Symbols

• DANGER: Indicates a hazard with a high risk of serious injury or death if not avoided.
• WARNING: Indicates a hazard with a medium risk of serious injury or death if not avoided.
• CAUTION: Indicates a hazard with a low risk of minor injury or property damage if not avoided.
• NOTE: Provides additional useful information for operating the product.

General Precautions: Check the product before each use. Do not operate a damaged product. Keep out of reach of children. Do not open the product. Protect from moisture, impacts, and extreme temperatures. Avoid strong magnetic fields. Do not expose to fire or high temperatures.

Battery Safety: Keep batteries out of reach of children. Do not short-circuit, open, or dispose of batteries in fire or water.

Radio Interface: Avoid use in aircraft, hospitals, or near sensitive electronic systems. Keep at least 20cm from pacemakers. Radio waves may cause interference with hearing aids.

Getting Started

Charging the Activity Tracker

The activity tracker is activated by charging. Connect the charging adapter [3] using the supplied USB cable [5] to a free USB port or USB power adapter.

Place the charging adapter [3] onto the charging contact [4] on the back of the activity tracker [2]. The adapter [3] attaches magnetically and clicks into place.

Note: Ensure the metal pins align correctly with the charging contacts [4].

The LED indicator [1] blinks blue and orange upon successful activation. After activation, the LED indicator [1] turns orange to show charging progress.

Charge the battery fully before first use. The LED indicator [1] lights up blue when charging is complete.

Note: The product cannot be turned on or off. It powers off automatically when the battery level drops below 1% and powers on when charging.

Downloading the SilverCrest SAT 70 Activity Tracker App

Download the SilverCrest SAT 70 Activity Tracker app from the Apple App Store or Google Play Store. Alternatively, scan the QR code.

The app uses Bluetooth® to connect to your smartphone and enables all product functions.

Pairing and Connecting the Product

To check the remaining battery level, press within the SilverCrest SAT 70 Activity Tracker App.

Ensure Bluetooth is enabled on your smartphone. Open the SilverCrest SAT 70 Activity Tracker App, tap > Pair, search for your tracker, and touch to connect.

The tracker will appear in the app. Select it. The app will connect to the wristband. Double-tap the tracker's LED area to complete pairing. Confirm the connection on your smartphone.

Once confirmed, the app will display "Successfully connected".

Functions

Notifications for Incoming Calls/Messages

Enable notifications in the app to receive alerts for incoming calls and messages. The tracker will vibrate.

When connected and the app is running, the tracker vibrates and the LED [1] blinks blue for incoming calls/messages during the set period.

Smart Alarm

Set alarms within the app. The tracker will vibrate at the set time. Up to 3 alarms can be set.

To set an alarm: Tap and then select Smart Alarm. Tap Add Alarm, configure settings, and save. The product will vibrate at the scheduled time.

Note: To delete an alarm, go to alarm settings and press Remove.

Activity Monitor and Sleep Data

Wear the tracker to monitor steps, distance, calories, and sleep patterns. Sync data by pressing and swiping down on the app display. Swipe left or right to view data.

Share Activity Data

Tap Share to access the sharing tab. Select a network and follow on-screen instructions.

Measure UV Radiation

Select UV monitoring in the app. Place the tracker in sunlight and press Test to measure UV radiation levels. Tap the UV radiation circle for more detailed statistics.

Find My Band

Use the 'Find Band' feature in the app to make the tracker vibrate and its LED [1] blink blue.

Band Software Update

Ensure your smartphone is connected to the product and the internet. Follow on-screen instructions in the app to update the band software.

Update SilverCrest SAT 70 Activity Tracker App

Ensure your smartphone is connected to the internet. Follow on-screen instructions in the app to update the app.

Restore Factory Settings

Reset the tracker to factory settings via the app. This will erase all data. Confirm with OK to restart the product.

Note: Vibration function is enabled for all features when battery is below 10%.

Waterproofing (IP67)

The tracker is water-resistant (IP67) for everyday activities like hand washing and showering, but not for diving. Water resistance is not permanent and can be affected by impacts.

Cleaning and Care

Clean with a soft, damp, lint-free cloth. Avoid abrasive cleaners or tools.

Storage When Not in Use

Store in a dry, dust-free place away from direct sunlight. For long-term storage, ensure the battery is fully charged to prolong its life. Recharge regularly if not in use.

Troubleshooting

Connection Issues

If there is no connection: Toggle Bluetooth on/off on your smartphone. Restart your smartphone. Ensure smartphone visibility is on. Reinstall the app.

Data Transfer Issues

If not all data is transferred: Ensure regular syncing. If not synced in 14 days, older data may be overwritten.

Disposal

Dispose of packaging responsibly via local recycling facilities. The product contains a rechargeable battery and must be disposed of at designated electronic waste collection points according to Directive 2012/19/EU.

Simplified EU Declaration of Conformity

OWIM GmbH & Co. KG declares compliance with relevant EU directives (2014/53/EU and 2011/65/EU). Full text available at www.owim.com.

Warranty

A 3-year warranty is provided from the date of purchase, covering material and manufacturing defects. Proof of purchase is required. The warranty does not cover normal wear and tear or damage resulting from misuse or improper maintenance.