CT15036GN PART ILLUSTRATION
Part Illustration
This section provides a visual breakdown of the Stanley CT15036GN tool. The diagram displays various components, each identified by a unique item number. These numbers correspond to the detailed parts list provided below. A designated area is present for recording the Model No. & Serial No. of the specific unit.
CT15036GN PART LIST
ITEM NO. | PART NO. | QTY | DESCRIPTION |
---|---|---|---|
1 | 118 | 1 | Retaining Ring |
2 | 144 | 18 | HSHCS 5/16-18 x 1-1/4 |
3 | 7626 | 2 | O-Ring |
4 | 9330 | 1 | O-Ring |
5 | 294 | 1 | O-Ring |
6 | 360 | 1 | O-Ring |
7 | 936 | 2 | Adapter |
8 | 1259 | 1 | O-Ring |
9 | 1521 | 2 | HSHCS 1/4-20 x 1 |
10 | 1534 | 1 | Roll Pin |
11 | 7736 | 2 | Setscrew |
12 | 1608 | 4 | Steel Ball 3/16 |
13 | 1809 | 1 | Valve Spool |
14 | 1812 | 1 | Valve Spool Screw |
15 | -- | - | No Item |
16 | -- | - | No Item |
17 | 16556 | 1 | Spring |
18 | 18050 | 1 | Back-Up Ring -029 |
19 | 21424 | 1 | Relief Valve |
20 | 21847 | 1 | T-Seal |
21 | 21848 | 1 | O-Ring |
22 | 22147 | 2 | Capscrew |
23 | 65726 | 1 | Push Rod |
24 | 1259 | 1 | O-Ring |
25 | 28294 | 1 | Die Yoke |
26 | 38622 | 1 | Valve Sleeve |
27 | 39925 | 1 | Compression Spring |
28 | 39939 | 1 | Valve Handle |
29 | 51182 | 1 | Trigger Guard |
30 | 51183 | 1 | Trigger |
31 | 52534 | 2 | Setscrew |
32 | -- | - | No Item |
33 | 58439 | 1 | Adapter |
34 | 58440 | 1 | Retaining Ring |
35 | 58441 | 1 | Sleeve |
36 | 58442 | 1 | Oil Tube |
37 | 58443 | 1 | Piston |
38 | 58444 | 1 | Cylinder |
39 | 62286 | 1 | Cylinder Head |
40 | 76653 | 1 | CT15 Sticker |
41 | 58594 | 1 | Retaining Ring |
42 | 935 | 1 | O-Ring |
43 | 1459 | 1 | Lockwasher, 3/8 |
44 | 4311 | 1 | HHCS 3/8-16 x 2.25 |
45 | 7467 | 2 | Die Button |
46 | 18689 | 2 | Spring |
47 | 18690 | 2 | Die Pin |
48 | 24874 | 1 | Setscrew 10-32 x 1/4 |
49 | 28295 | 1 | Head Adapter |
50 | 28507 | 1 | Rod Wiper |
51 | 37734 | 1 | Extender |
52 | 37735 | 1 | Die Retainer |
53 | 7961 | 1 | Warning Sticker |
54 | 67259 | 1 | Check Valve Assy |
SEAL KIT: 58552