Broan-NuTone ACCESSORY SPEAKER

APPLICATION

The SPKACC is a Hi-Fidelity, Bluetooth® wireless technology enabled accessory that works with all QT-series Broan and NuTone bath fans except: fans with humidity sensing, fans equipped with heaters, and fans controlled with variable speed controls.

The SPKACC can be used only with the models shown in this chart:

NOTE: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Broan-NuTone LLC is under license. Other trademark and trade names are those of their respective owners.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2ADLL-99528551

This Bluetooth® wireless technology enabled Speaker complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying exposure compliance. This speaker must not be co-located or operate in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

NOTE: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

INSTALLATION WITH "RAISED" MOTOR BRACKET

INSTALLATION WITH "FLAT" MOTOR BRACKET

Bluetooth® wireless technology SPEAKER OPERATION

Connecting for the First Time

1. To play your personal music or audio files, you need a Bluetooth wireless technology enabled Smart Phone, Tablet, or any other such device.
2. Set your device to a low-to-midrange volume before connecting to the speaker.
3. Make sure Fan is ON and Bluetooth® wireless technology enabled device is located within 10 meters (approximately 33 feet) of the Speaker/Fan.
4. Pairing your Bluetooth® wireless technology enabled device with the Speaker:
   1. For iPad/iPhone/iPod touch: From your device home page, tap Settings. Then tap General (if applicable), then tap Bluetooth. Move the Bluetooth® Slider to ON/green. The Broan-NuTone Speaker identifier "Sensonic™™ Vent Fan" should appear in the list of Discoverable Devices. If not, turn the Fan OFF, then ON, then turn Bluetooth® OFF, then ON. Consult your device's manual if "Sensonic™™ Vent Fan" is still not listed. Tap "Sensonic™™ Vent Fan" to complete pairing.
   2. For Android Phone/Tablet: From your device home page, tap Settings. Go to Wireless & Controls, Wireless & Networks, or similar. Find and tap Bluetooth® or move the slider to ON. Tap "Scan for Devices" or "Search for Devices". The Broan-NuTone Speaker identifier "Sensonic™™ Vent Fan" should appear in the list of Available Devices. If not, turn the Fan OFF, then ON, and repeat pairing. Consult your Android device's manual if "Sensonic™™ Vent Fan" is still not listed. Tap "Sensonic™™ Vent Fan" to complete pairing.
   3. For all other Bluetooth® wireless technology enabled devices: Follow your device's instructions to search for Bluetooth® accessories. Go to the "Paired Devices" screen and SELECT "Search for Devices". The "Sensonic™™ Vent Fan" identifier should appear. If not, turn the Fan OFF, then ON, and repeat pairing.
5. Open your audio program and play your music or audio files. The audio should play over the Bluetooth® Fan Speakers.
6. When finished, disconnect by turning OFF the fan, disconnecting Bluetooth® from your device, or moving the device out of range (approx. 10 meters / 33 feet).

Connecting Subsequent Times

1. The Sensonic™ Speaker plays one device at a time; one device must be DISCONNECTED (but not necessarily UNPAIRED) before using another.
2. If your device was DISCONNECTED but not UNPAIRED, it should auto-connect when in range, unless already connected to another device. If not, find your "Paired Devices" list and TAP on "Sensonic Vent Fan" to reconnect.
3. If your device was UNPAIRED, follow the initial pairing procedure.
4. Open your audio program and play your music or audio files.
5. Disconnect when finished as described in the previous section.

WARRANTY

Limited Warranty

Warranty Period and Exclusions: Broan-NuTone LLC warrants the original consumer purchaser that the Product will be free from material defects in material or workmanship for a period of one (1) year from the date of original purchase. This warranty does not cover speed controls, fluorescent lamp starters, tubes, halogen and incandescent bulbs, fuses, filters, ducts, roof caps, wall caps, and other accessories. It also does not cover normal maintenance, wear and tear, misuse, abuse, negligence, accident, improper maintenance, faulty installation, or use contrary to instructions. Products moved from their original installation point, damage from environmental elements, transit damage, natural wear of finish, commercial/non-residential use, or damage from fire, flood, or acts of God are also excluded. This warranty covers only Products sold to original consumers in the United States by the Company or authorized U.S. distributors.

No Other Warranties: This Limited Warranty contains the Company's sole obligation and your sole remedy. The Company disclaims and excludes all other express warranties and all warranties implied by law, including those of MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE. Any applicable implied warranty duration is limited to the express warranty period.

Remedy: During the warranty period, the Company will, at its option, provide replacement parts, or repair or replace any Product or part thereof found to be defective, without charge. The Company will ship repaired or replaced items at no charge. You are responsible for removal, reinstallation, and shipping costs.

Exclusion of Damages: The Company shall not be liable for incidental, indirect, consequential, or special damages arising out of or in connection with the Product, its use, or performance.

How to Obtain Warranty Service: Notify the Company within seven (7) days of discovering a defect, provide the model number and part identification, and describe the defect. Present evidence of the original purchase date. Contact Broan-NuTone LLC at 926 West State Street, Hartford, WI 53027, or call 800-637-1453. More information is available at www.broan.com.