DS18 LC-DRM Water Resistant High Power Digital LED Lights Bluetooth Controller

Features

• Latest BT 5.4 Version for faster speed & longer range.
• Compact Design.
• Up to 15 Amps of Lighting Capacity.
• Control Multiple Digital LED Lights.
• Water Resistant, IP66 rated.
• 12 Volt Applications.
• Not For Submersible Use.
• Compatible with Both iOS and Android Platforms.
• Up to 8 LED Channels (Parallel)
• Bluetooth® Control Distance Up to: 100Ft/30m.

Specifications

• Voltage Operation: 10~15 DC Volts
• Fuse Size: 20A (Built-In)
• Water Resistant Rating: IP66
• Buttons/Controls: APP Controlled
• Body Material / Color / Finish: PC / Black / PC / Negro
• Short Circuit Protection: Yes (>25A)
• Max Output Power (Total): 180W
• Max Output Current (Total): 15A
• Number of Channels (Colors): 1 (Digital) / 1 (Digital)
• Chip Model Compatible: SM16703 / WS2811 / SK6809 / SK6812
• Number of Channels: Up to 8 (Parallel)
• Number of Pixels: 128
• Length of Pixels: 1280
• Data Protocol: Unipolar RZ (Return to Zero)
• BT Version: 5.4
• Services: BLE 2Mbps
• Bluetooth® Name: DS18 LC-DRM
• Range: >100ft/>30m
• Supported Devices: iOS / ANDROID

Measurements

• Overall Length: 3.3" / 86mm
• Overall Width: 3.2" / 83mm
• Overall Height: 1" / 27mm
• Input Wires Length / Size: 9.8" / 250mm (12/16 AWG)
• Output Wires Length / Size: 9.8" / 250mm (12/16 AWG)

Installation

Step One: Download the APP (DS18 LC) in ANDROID (GOOGLE PLAY STORE) or IOS (APP STORE).

Step Two: Once the controller has powered on, open the APP (DS18 LC) on your phone.

Step Three: Make sure you have the correct module on the "DEVICE LIST," then click on "CONNECT." Ensure Bluetooth® and GPS positioning are enabled.

Step Four: The app will auto-select "RGB MODE" or "MAGIC MODE" based on connected lights. Manual selection is available if both modes are needed.

Step Five: Select "STATIC" mode and click on "RED." If the LED strip is red, proceed to Step Six. Otherwise, follow the "WIRE ORDER" section.

Step Six: Click on "GREEN." If the LED strip is green, the Wire Order Setting is complete. If not, revisit the "WIRE ORDER" section.

Step Seven: Adjust the number of LED lights for the best display effect. Up to 1280 LEDs can be used in a single cycle.

App Functions

• Power: On/off
• Color Wheel: Choose color with touch-sensitive color wheel.
• Brightness: Slider Controlled; Change the light intensity.
• Speed: Slider Controlled; Change the speed at which colors change in multi-color mode.
• Favorite Mode: Save your custom light mode.
• Mode Palette: Choose between different lighting patterns.
• Music or Mic Mode: Control music via library or live music.

Magic Mode Settings

• Light Switch
• Mode Switch
• Connection Settings
• DIY Color Confirm button / Current Color
• Color Selection Palette
• Favorite Confirm button
• Mode Palette
• Favorite Mode Storage: Select favorite color mode, then click "MARK" to save (FAV1, FAV2...).
• Specific Color Selection: Click "+", select DIY color circle, then click "MARK" to add a new color.
• Normal Color Selection
• Main Mode
• Secondary Mode
• Brightness Adjustment
• Speed Adjustment
• Wire Order Adjustment
• LED Quantity Adjustment
• Music Mode
• Turn to Main Page

Warranty

Please visit our website DS18.com for more information on our warranty policy.

DS18 reserves the right to change products and specifications at any time without notice. Images may or may not include optional equipment.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body. Use only the supplied antenna.

Changes or modifications to this product not authorized by DS18 could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.

Warnings

WARNING: Cancer and Reproductive Harm. www.P65Warning.ca.gov