Teltonika RUT906 Datasheet

Hardware

Front View

The front view of the RUT906 displays the following interfaces and indicators: LAN Ethernet ports (labeled LAN1, LAN2, LAN3), a WAN Ethernet port, LAN LEDs, a Power socket, an RS485 interface with a WAN LED, Mobile signal strength indication LEDs, a Power LED, an RS232 interface, a Mobile connection status LED, and an Input/output connector.

Back View

The back view features: Mobile AUX antenna connector (SMA female), GPS antenna connector (SMA female), Mobile MAIN antenna connector (SMA female), SIM1 slot, Wi-Fi antenna connector (RP-SMA female), SIM2 slot, and a Wi-Fi antenna connector (RP-SMA female). It also shows a USB port, Reset button, and SIM needle slot.

Power Socket Pinout

The power socket pinout is as follows:

Power / Red wire
Ground / Black wire
Input / Green wire
Output / White wire

Features

Mobile

Feature	Description
Mobile module	4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
3GPP Release	Release 9
3GPP Release	Release 10/11 depending on the hardware version
SIM switch	2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status	IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD	Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list	Operator black/white list (by country or separate operators)
Band management	Band lock, Used band status display
SIM idle protection service	When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
SIM PIN code management	SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN	Auto APN
Bridge	Direct connection (bridge) between mobile ISP and device on LAN
Passthrough	Router assigns its mobile WAN IP address to another device on LAN

Wireless

Feature	Description
Wireless mode	802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi security	WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
SSID/ESSID	ESSID stealth mode
Wi-Fi users	Up to 100 simultaneous connections
Wireless Connectivity Features	Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter	Whitelist, blacklist
Wireless QR code generator	Once scanned, a user will automatically enter your network without needing to input login information

Ethernet

Interface	Specification
WAN	1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
LAN	3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

Feature	Description
Routing	Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols	TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support	H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring	Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall	Port forward, traffic rules, custom rules
Firewall status page	View all your Firewall statistics, rules, and rule counters
Ports management	View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology	Visual representation of your network, showing which devices are connected to which other devices
Hotspot	Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
DHCP	Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)	Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS	Supported >25 service providers, others can be configured manually
DNS over HTTPS	DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup	Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing	Balance Internet traffic over multiple WAN connections
SSHFS	Possibility to mount remote file system via SSH protocol

Security

Authentication & Firewall

Feature	Description
Authentication	Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Firewall	Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention	DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN	Port and tag-based VLAN separation
Mobile quota control	Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter	Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control	Flexible access control of SSH, Web interface, CLI and Telnet
SSL certificate generation	Let's encrypt support

VPN

VPN Type	Encryption Methods
OpenVPN	Multiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN Encryption	DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec	XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE	GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP	Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel	Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code
DMVPN	Method of building scalable IPsec VPNs
SSTP	SSTP client instance support
ZeroTier	ZeroTier VPN client support
WireGuard	WireGuard VPN client and server support
Tinc	Tinc offers encryption, authentication and compression in it's tunnels. Client and server support

Protocols

Protocol	Supported Connection Types / Modes	Description
BACNET	Supported connection types: RS485, TCP Supported modes: Router	-
OPC UA	Supported modes: Client, Server	-
MODBUS	Supported connection types: TCP Supported modes: Server, Client RTU (RS232, RS485), TCP, USB	MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Custom registers	8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII	-
DATA TO SERVER	Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis	Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
MQTT GATEWAY	Modbus MQTT Gateway	Allows sending commands and receiving data from MODBUS Server through MQTT broker
DLMS	DLMS Support: DLMS - standard protocol for utility meter data exchange Supported modes: Client Supported connection types: RS232, RS485, TCP	-
API	Teltonika Networks Web API (beta) support	Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management

Monitoring Features

Feature	Description
WEB UI	HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
FOTA	Firmware update from server, automatic notification
SSH	SSH (v1, v2)
SMS	SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call	Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
TR-069	OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT	MQTT Broker, MQTT publisher
SNMP	SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC	Management API over HTTP/HTTPS
MODBUS	Teltonika Remote Management System (RMS)

IoT Platforms

Clouds of things: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type.
ThingWorx: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions.
Cumulocity: Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs.

System Characteristics

Component	Specification
CPU	Mediatek, 580 MHz, MIPS 24KEc
RAM	128 MB, DDR2
FLASH storage	16 MB, SPI Flash

Firmware / Configuration

Feature	Description
WEB UI	Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA	Update FW
RMS	Update FW/configuration for multiple devices at once
Keep settings	Update FW without losing current configuration
Factory settings reset	A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

Firmware Customisation

Feature	Description
Operating system	RutOS (OpenWrt based Linux OS)
Supported languages	Busybox shell, Lua, C, C++, and Python, Java in Package manager
Development tools	SDK package with build environment provided
GPL customization	You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients' needs
Package Manager	The Package Manager is a service used to install additional software on the device

Location Tracking

Feature	Description
GNSS	GPS. (GLONASS, BeiDou, Galileo and QZSS - under development)
Coordinates	GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA	NMEA 0183
NTRIP	NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software	Supported server software TAVL, RMS
Geofencing	Configurable multiple geofence zones

Serial

Interface	Specification
RS232	DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate
RS485	RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate
Serial functions	Console, Serial over IP, Modem

Interfaces & Specifications

USB

Feature	Description
Data rate	USB 2.0
Applications	Samba share, USB-to-serial
External devices	Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
Storage formats	FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

Input/Output

Feature	Description
Input	1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output	1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
Events	Email, RMS, SMS
I/O juggler	Allows to set certain I/O conditions to initiate event

SD Card

Feature	Description
Physical size	Micro SD (internal)
Applications	Samba share, Storage Memory Expansion, DLNA
Capacity	Up to 64 GB
Storage Formats	FAT32, NTFS, ext2, ext3, ext4

Power

Feature	Description
Connector	4-pin industrial DC power socket
Input voltage range	9 - 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
PoE (passive)	Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
Power consumption	< 2 W idle, < 7 W Max

Physical Interfaces

Interface	Specification
Ethernet	4 x RJ45 ports, 10/100 Mbps
I/O's	2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector
Status LEDs	1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
SIM	2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
Power	1 x 4-pin power connector
Input/output	1 x 10-pin industrial socket for inputs/outputs
Antennas	2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
USB	1 x USB A port for external devices
RS232	1 x DB9 socket
RS485	1 x 6-pin industrial socket
Reset	Reboot/User default reset/Factory reset button

Physical Specification

Attribute	Specification
Casing material	Aluminium housing, plastic panels
Dimensions (W x H x D)	109.5 x 50 x 100 mm
Weight	295 g
Mounting options	DIN rail, wall mount, flat surface (all require additional kit)

Operating Environment

Attribute	Specification
Operating temperature	-40 °C to 75 °C
Operating humidity	10% to 90% non-condensing
Ingress Protection Rating	IP30

Regulatory & Type Approvals

Regulatory certifications include: CE, UKCA, RCM, CB, E-mark.

Compliance & Standards

EMC Emissions & Immunity

Category	Standards
Emissions	EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 61000-3-2:2019+A1:2021
Immunity	EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-19 V2.2.0, EN 301 489-52 V1.2.1
ESD	EN 61000-4-2:2009
Radiated Immunity	EN IEC 61000-4-3:2020
EFT	EN 61000-4-4:2012
CS	EN 61000-4-6:2014
DIP	EN IEC 61000-4-11:2020

RF Standards

Category	Standards
General	CE: EN 62311 CB: IEC 62368-1:2018
RF	EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 300 328

Standard Package

The standard package for the RUT906 includes:

Router RUT906
9 W PSU
2x Mobile antennas (magnetic mount, SMA male, 3 m cable)
2x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
GNSS antenna (adhesive, SMA male, 3 m cable)
RS485 connector block
I/O connector block
Ethernet cable (1.5 m)
SIM Adapter kit
QSG (Quick Start Guide)
Packaging box

Note: Standard package contents may differ based on standard order codes.

Classification Codes & Available Versions

Classification Codes

HS Code: 851762
HTS: 8517.62.00

Available Versions

Hardware Version	Supported Frequencies	Standard Order Code / Package Contains
RUT906 0***** (Europe¹, The Middle East, Africa, Thailand, Australia, New Zealand)	4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28 4G (LTE-TDD): B38, B40, B41 3G: B1, B8 2G: B2, B8	RUT906000000 / Standard package with EU PSU RUT906000200 / Standard package with UK PSU RUT906000800 / Standard package with AU PSU RUT906000300 / Standard package with Power cable with 4-way screw terminal RUT906000400 / Standard package with Universal PSU RUT906000100 / Mass packing code

¹ Regional availability - excluding Russia & Belarus.

The price and lead-times for region (operator) specific versions may vary. For more information please contact Teltonika Networks.

Spatial Measurements

Main Measurements

W x H x D dimensions for RUT906:

Device housing*: 110 x 50 x 100 mm
Box: 355 x 60 x 175 mm

*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements refer to specific sections.

Top View Diagram Description

The top view diagram illustrates the RUT906 and its components as seen from the top, indicating dimensions such as 100 mm width, 93.9 mm depth, and various component placements with specific measurements.

Right View Diagram Description

The right view diagram shows the RUT906 and its components from the right side, detailing dimensions like 50.1 mm height, 100 mm width, and specific component placements with measurements such as 14.2 mm, 18.1 mm, and 5x6.4 mm.

Front View Diagram Description

The front view diagram depicts the measurements of the RUT906 and its components as seen from the front panel side. It includes detailed measurements for various ports, connectors, and indicators, showing dimensions like 13.4 mm, 21.7 mm, 26.9 mm, 29.9 mm, and overall width measurements up to 109.6 mm.

Rear View Diagram Description

The rear view diagram illustrates the measurements of the RUT906 and its components from the back panel side. It shows the placement of SIM slots (SIM1, SIM2), USB port, Reset button, Wi-Fi connectors, GPS connector, and Mobile antenna connectors, along with detailed dimension markings.

Mounting Space Requirements

The diagram shows an approximation of the device's dimensions when cables and antennas are attached, indicating overall dimensions of approximately 110 mm width, 51 mm height, and 150 mm depth, with a 20 mm clearance for cables and a 30 mm space for the DIN rail mount.

DIN Rail Mounting

The scheme depicts protrusion measurements for an attached DIN Rail, indicating a protrusion of approximately 16 mm from the mounting surface.

	Teltonika RUTM55 Datasheet: 5G Industrial Router Specifications Comprehensive datasheet for the Teltonika RUTM55, detailing its 5G/LTE connectivity, hardware features, network capabilities, security, VPN support, and industrial applications.
	Teltonika RUT955 Quick Start Guide - Installation and Configuration Comprehensive quick start guide for the Teltonika RUT955 router, covering hardware installation, device login, technical specifications, and safety information. Learn how to set up your RUT955 for reliable connectivity.
	Teltonika RUT956 Industrial Cellular Router: Features & Specifications Explore the Teltonika RUT956, a robust industrial cellular router offering dual-SIM 4G LTE, Wi-Fi, GNSS, multiple interfaces, and advanced RutOS software for reliable connectivity and IoT solutions.
	Teltonika ATRM50 5G Transport Router Datasheet Comprehensive datasheet for the Teltonika ATRM50, a rugged 5G transport router designed for industrial and enterprise applications, detailing its hardware, features, network capabilities, security, and specifications.
	Teltonika RUT955 Quick Start Guide v2.2 A quick start guide for the Teltonika RUT955 router, covering hardware installation, login procedures, and technical specifications. Includes multilingual safety information and conformity declarations.
	Teltonika RUTM30 Datasheet Datasheet for the Teltonika RUTM30, a 5G router with advanced features for connectivity and management.
	Teltonika RUTX11 Quick Start Guide: Installation, Setup, and Specifications Comprehensive quick start guide for the Teltonika RUTX11 router. Learn about hardware installation, device setup, login procedures, technical specifications, and safety compliance. Includes detailed descriptions of ports, antennas, and connectivity options.
	Teltonika RUTX10 Datasheet: Features, Specifications, and Mounting Comprehensive datasheet for the Teltonika RUTX10 router, detailing its hardware features, network capabilities, security protocols, physical specifications, installation, and mounting options.