Teltonika RUTX10 Datasheet
This document provides detailed specifications and information for the Teltonika RUTX10 router.
Hardware Overview
Front View
The front panel of the RUTX10 features a power/reset button, four LAN Ethernet ports (RJ45), and WAN LEDs. The power status is indicated by a dedicated LED.
Back View
The back panel includes connectors for WiFi and Bluetooth antennas, a grounding screw for secure installation, and a USB port for external devices.
Power Socket Pinout
The 4-pin power connector is configured as follows: ⚡ Power / Red wire, ? Input / Green wire, ? Ground / Black wire, and ? Output / White wire.
Features
Ethernet
| Interface | Specification |
| WAN | 1 x WAN port (configurable as LAN), 10/100/1000 Mbps, IEEE 802.3, 802.3u, 802.3az standards, auto MDI/MDIX crossover |
| LAN | 3 x LAN ports, 10/100/1000 Mbps, IEEE 802.3, 802.3u, 802.3az standards, auto MDI/MDIX crossover |
Wireless
| Feature | Specification |
| Wireless Mode | 802.11b/g/n/ac Wave 2 (WiFi 5), up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
| WiFi Security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| ESSID | ESSID stealth mode |
| WiFi Users | Up to 150 simultaneous connections |
| Wireless Hotspot | Captive portal, internal/external Radius server, customizable landing page |
Bluetooth
| Feature | Specification |
| Bluetooth 4.0 | Bluetooth low energy (LE) for short-range communication |
Network
| Feature | Specification |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
| Network Protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers for proper VoIP routing |
| Connection monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forwards, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supported >25 service providers, configurable manually |
| Network backup | VRRP, Wired and WiFi WAN options for automatic Failover |
| SSHFS | Mount remote file systems via SSH protocol |
Security
| Feature | Specification |
| Authentication | Pre-shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured rules via WebUI, unlimited configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention | DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Port and tag based VLAN separation |
| WEB filter | Blacklist for blocking websites, whitelist for allowed sites |
| Access control | Flexible access control for TCP, UDP, ICMP packets, MAC address filter |
VPN
| VPN Type | Specification |
| OpenVPN | Multiple clients and server instances, 12 encryption methods |
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPsec | IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| GRE | GRE tunnel |
| PPTP, L2TP | Client/Server instances, L2TPv3 support |
| Stunnel | Proxy for adding TLS encryption to existing clients/servers |
| DMVPN | Scalable IPsec VPNs |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
MODBUS TCP SLAVE
| Feature | Specification |
| ID filtering | Respond to one ID in range [1;255] or any |
| Allow remote access | Access through WAN |
| Custom registers | Modbus TCP custom register block for file read/write and extended functionality |
MODBUS TCP MASTER
| Feature | Specification |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8-bit (INT, UINT), 16-bit (INT, UINT), 32-bit (float, INT, UINT), HEX, ASCII |
MQTT GATEWAY
| Feature | Specification |
| Gateway | Allows sending commands and receiving data from Modbus Master via MQTT broker |
DATA TO SERVER
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
MONITORING & MANAGEMENT
| Feature | Specification |
| WEB UI | HTTP/HTTPS for status, configuration, FW update, CLI, logs |
| FOTA | Firmware update from server, automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, configuration, send/read SMS via HTTP POST/GET |
| Call | Reboot, Status, Mobile data on/off, Output on/off |
| TR-069 | Supports various ACS platforms (OpenACS, EasyCwmp, etc.) |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| MODBUS | MODBUS TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
System Characteristics
| Component | Specification |
| CPU | Quad-core ARM Cortex A7, 717 MHz |
| RAM | 256 MB, DDR3 |
| FLASH storage | 256 MB, SPI Flash |
Firmware / Configuration
| Feature | Specification |
| WEB UI | Update FW from file, check FW on server, configuration profiles, backup |
| FOTA | Update FW/configuration from server |
| RMS | Update FW/configuration for multiple devices |
| Keep settings | Update FW without losing current configuration |
Firmware Customization
| Feature | Specification |
| Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++ |
| Development tools | SDK package with build environment |
USB
| Feature | Specification |
| Data rate | USB 2.0 |
| Applications | Samba share, USB-to-serial |
| External devices | Connect external HDD, flash drive, additional modem, printer |
| Storage formats | FAT, FAT32, NTFS |
? Input/Output & Power
Input/Output
| Feature | Specification |
| Input | 1 x Digital Input (0-6V low, 8-30V high) |
| Output | 1 x Digital Output (Open collector, max 30V, 300mA) |
| Events | Email, RMS |
| I/O juggler | Allows setting I/O conditions to initiate events |
Power
| Feature | Specification |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9-50 VDC, reverse polarity protection, voltage surge/transient protection |
| PoE (passive) | Passive PoE, powers up through LAN port, not compatible with IEEE802.3af, 802.3at, 802.3bt standards |
| Power consumption | 9 W Max |
Physical Interfaces
Ethernet
4 x RJ45 ports, 10/100/1000 Mbps.
I/Os
1 x Digital Input, 1 x Digital Output on 4-pin power connector.
Status LEDs
8 x LAN status LEDs, 1 x ⚡ Power LED, 2 x 2.4G and 5G ? WiFi LEDs.
Power
1 x 4-pin DC connector.
Antennas
2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth.
USB
1 x USB A port for external devices.
Reset
Reboot/User default reset/Factory reset button.
Other
1 x ? Grounding screw.
Physical Specification
| Parameter | Specification |
| Casing material | Aluminium housing with DIN rail mounting option |
| Dimensions (W x H x D) | 115 x 32.2 x 95.2 mm |
| Weight | 355 g |
| Mounting options | DIN rail, flat surface placement |
Operating Environment
| Parameter | Specification |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Hardware Installation
- Attach all antennas.
- Connect the power adapter to the socket on the front of the device, then plug the other end into a power outlet.
- Connect to the device wirelessly using the SSID and password from the device label, or use an Ethernet cable connected to a LAN port.
? Login to Device
- Open a web browser and navigate to
http://192.168.1.1. - Enter the username and password when prompted. (See Image A for reference).
- Upon first login, you will be required to change the default password for security. The new password must be at least 8 characters long, including uppercase, lowercase letters, and digits.
- After changing the password, the Configuration Wizard will launch to help set up main operating parameters.
Image A Description: A screenshot of the RUTX10 login interface showing fields for username and password, with default credentials 'admin' and 'admin01' pre-filled.
⚙️ Setup Wizard
After logging into the WebUI, you will be prompted to change the default password and initiate the Setup Wizard:
- Select your time zone and optionally sync the router's time with your browser.
- Configure default LAN settings unless specific network requirements dictate otherwise.
Technical Information
Radio Specifications
| Feature | Specification |
| RF technologies | WiFi, BLE |
| Max RF power | 23 dBm@WiFi, 10 dBm@BLE |
Bundled Accessories Specifications
| Item | Specification |
| Power adapter | Input: 0.6 A@100-240 VAC, Output: 12 VDC, 1.5 A, 4-pin plug |
| WiFi antenna | 2400~2483.5 MHz/5150~5905 MHz, 50 Ω, VSWR<2, gain 5 dBi, omnidirectional, RP-SMA male connector |
| BLE antenna | 2400~2483.5 MHz, 50 Ω, VSWR<2, gain 2 dBi, omnidirectional, RP-SMA male connector |
* Order code dependent. ** Higher gain antennas can be used to compensate for cable attenuation. Users are responsible for compliance with legal regulations.
? What's in the Box?
Standard Package Contains*
- Router RUTX10
- 18 W PSU
- 2 x WiFi antennas (swivel, RP-SMA male)
- 1 x Bluetooth antenna (magnetic mount, RP-SMA male, 1.5 m cable)
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- RMS Flyer
- Packaging box
Included Items Visual Description: Images display the RUTX10 router, an 18W power supply, two swivel WiFi antennas, one magnetic mount Bluetooth antenna with cable, and an Ethernet cable.
? Standard Order Codes
| PRODUCT CODE | HS CODE | HTS CODE | PACKAGE CONTAINS |
| RUTX10000000 | 851762 | 8517.62.00 | Standard package with Euro PSU |
| RUTX10000200 | 851762 | 8517.62.00 | Standard package with US PSU |
For more information on all available packaging options, please contact Teltonika Networks directly.
? Mounting Options
DIN RAIL KIT
| Parameter | Value |
| Mounting standard | 35mm DIN Rail |
| Material | Low carbon steel |
| Weight | 57g |
| Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
| Dimensions | 82 mm x 46 mm x 20 mm |
| RoHS Compliant | Yes |
DIN RAIL KIT Components: DIN Rail adapter, Philips Pan Head screw #6-32×3/16, 2pcs (for RUT2xx/RUT9xx).
ORDER CODE: PR5MEC00
COMPACT DIN RAIL KIT
| Parameter | Value |
| Mounting standard | 35mm DIN Rail |
| Material | ABS + PC plastic |
| Weight | 6.5 g |
| Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
| Dimensions | 70 mm x 25 mm x 14.5 mm |
| RoHS Compliant | Yes |
DIN RAIL KIT Components: Compact plastic DIN Rail adapter (70x25x14.5mm), Philips Pan Head screw #6-32×3/16, 2pcs.
ORDER CODE: PR5MEC11
SURFACE MOUNTING KIT
| Parameter | Value |
| Mounting standard | Flat surface mount |
| Material | ABS + PC plastic |
| Weight | 2x5 g |
| Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
| Dimensions | 25 mm x 48 mm x 7.5 mm |
| RoHS Compliant | Yes |
DIN RAIL KIT Components: Surface mounting kit, Philips Pan Head screw #6-32×3/16, 2pcs.
ORDER CODE: PR5MEC12
For more information on all available packaging options, please contact Teltonika Networks directly.
? Spatial Measurements & Weight
Main Measurements
W x H x D dimensions for RUTX10:
- Device housing*: 115 x 32.2 x 95.2 mm
- Box: 173 x 71 x 148 mm
*Housing measurements exclude antenna connectors and screws.
Top View
Diagram Description: A diagram showing the top view of the RUTX10, detailing its overall width and depth, and the spacing of its components.
Right View
Diagram Description: A diagram illustrating the right side view of the RUTX10, providing measurements for its height and depth.
Front View
Diagram Description: A detailed diagram of the RUTX10's front panel, showing precise measurements for ports, LEDs, and buttons.
Rear View
Diagram Description: A detailed diagram of the RUTX10's rear panel, indicating precise measurements for connectors and ports.
? Mounting Space Requirements
Diagram Description: A 3D isometric view depicting the RUTX10 with attached antennas and cables, illustrating the approximate overall space required, including height, width, and depth.
?️ DIN RAIL
Diagram Description: A side view diagram showing the RUTX10 mounted on a DIN rail, with measurements indicating the protrusion from the rail.
