GAMDIAS TALOS E2 Elite
Quick Installation Guide
Specifications
| Feature | Detail |
|---|---|
| SERIES | TG Series |
| Product Name | TALOS E2 Elite |
| Case Type | MID Tower |
| Dimension (L x W x H) | 392 x 230 x 467 mm (15.4 x 9 x 18.3 inch) |
| Chassis Dimension (L x W x H) | 350 x 230 x 445 mm (13.7 x 9 x 17.5 inch) |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7+3 |
| Material | SPCC, ABS, Tempered glass |
| Window | Front, Left |
| Radiator Support | Top: 280 mm, 240mm Front: 360 mm, 280 mm Rear: 140 mm, 120mm |
| Fan Support | Top: 2 x 120mm, 2 x 140mm Front: 3 x 120mm, 2 x 140mm, 2 x 200mm Rear: 1 x 120mm, 1 x 140mm |
| Pre-installed Fans | Front: 3 x 120mm ARGB Fans Rear: 1 x 120mm Fan |
| Pre-installed Control BOX | NO |
| Motherboard Sync | 5V 3-Pin Addressable Header |
| Drive Bays | 2 x 3.5" or 1 x 2.5" + 1 x 3.5" (HDD Cage) 3 x 2.5" |
| Clearance | CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm |
| I/O Port | USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1 |
Exploded View & Parts
A visual representation of the PC case components laid out. The main chassis body is shown with the tempered glass side panel and front panel detached. Various fans, an HDD cage, and rubber feet are depicted separately, indicating their placement and function within the case structure.
Parts List
- Chassis Body
- Tempered Glass Side Panel
- Right Side Panel
- Top Dust Filters
- Tempered Glass Front Panel
- I/O Port
- 12CM ARGB FAN
- HDD Cage
- Rubber Foot
- 120 MM Fan
Accessory List
| Figure | Parts Name | QTY | Used For |
|---|---|---|---|
| [Screw] | Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard |
| [Screw] | Screw #6 x 6 mm | 6 | PSU |
| [Screw] | Screw #6 x 5 mm | 9 | HDD |
| [Screw] | Screw M3 x 5 mm | 18 | 2.5" HDD/Motherboard/ODD |
| [Cable Tie] | Cable Tie | 5 | Cable Management |
Side Panel Removal
Illustration 1 shows the side panel being tilted upwards from the chassis. Illustration 2 shows the side panel being slid off the chassis.
Remove the side panel.
Motherboard Installation
An illustration shows the PC chassis laid down horizontally. An arrow indicates the correct placement for installing the motherboard, followed by an indication to secure it with screws.
Lay down the chassis. Install the motherboard in proper location and secure it with screws.
PSU Installation
An illustration shows the rear of the PC case with a PSU unit being inserted into its designated bay.
Place the PSU in proper location.
3.5" & 2.5" HDD Installation
Diagram A illustrates the mounting of a 3.5" HDD using a bracket and screws. Diagram B shows the mounting of a 2.5" SSD using a similar bracket and screws.
A. 3.5" HDD: Align the HDD into the mounting holes and screw in.
B. 2.5" SSD: Align the SSD into the mounting holes and screw in.
Air Cooling Compatibility
Diagrams and tables indicate the compatible fan sizes for the top, front, and rear sections of the PC case.
| Location | Compatibility |
|---|---|
| Top | 2 x 120mm or 2 x 140mm |
| Front | 3 x 120mm or 2 x 140mm or 2 x 200mm |
| Rear | 1 x 120mm or 1 x 140mm |
Radiator Compatibility
Tables detail the compatible radiator sizes for the top, front, and rear mounting locations of the PC case.
| Location | Compatibility |
|---|---|
| Top | 280 mm or 240 mm |
| Front | 360 mm or 280 mm |
| Rear | 140 mm or 120 mm |
I/O Ports
A top-down view of the front panel I/O ports, with numbered labels pointing to each connector.
- 1: Power Button
- 2: Fan LED Control
- 3: USB 2.0
- 4: Headphone
- 5: Mic
- 6: USB 2.0
- 7: USB 3.0
Note: Sync With Motherboard: Press and Hold the Fan LED Control Button for 3 Seconds.
I/O Connectors
Illustrations show various front panel connectors including USB 3.0, USB 2.0, HD AUDIO, POWER SW, LED/RGB SW, RESET SW, HDD LED, POWER LED+, and POWER LED-. Instructions advise referring to the motherboard manual for specific pin-outs.
See your motherboard's manual for front panel header locations and pin-outs.
