AMZCHEF ZM5003 Professional Blender

Important Safeguards

⚠️ **WARNING:** This product contains electrical connections and moving parts that may pose a risk to the user. Follow basic safety precautions to avoid serious injury.

Read all instructions, warnings, and cautions before using the blender. Failure to do so may result in improper use, serious injury, and void the warranty.

• Read and follow all instructions carefully.
• Take care when unpacking and assembling; blades are sharp.
• Inventory all contents to ensure all parts are present.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised. Close supervision is required when used by or near children.
• Do not allow children to use this appliance or play with it.
• To protect against electric shock, do not immerse the unit or allow the power cord to contact liquid.
• Always turn off and unplug the appliance before assembling, disassembling, cleaning, or when not in use. Grip the plug, not the cord, to unplug.
• Do not operate with a damaged cord or plug, or after malfunction. Contact customer service for examination or repair.
• GFCI circuit breakers may be installed. If the blender malfunctions, reset the outlet or breaker. If it trips repeatedly, unplug the blender and let it rest for 24 hours. Contact customer service if the problem persists.
• The power cord cannot be replaced. If damaged, contact customer service for maintenance.
• Before use, wash all parts that contact food.
• Always use the unit on a dry, level, and firm surface. Never use on soft surfaces.
• Unauthorized alterations or modifications can cause fire, electric shock, or injury.
• Do not use unauthorized accessories, as this may cause fire, electric shock, or injury.
• Do not use outdoors.
• This product is designed for household use only.
• Verify the voltage matches the machine's indicated voltage.
• Do not let the cord hang over the edge of a table or counter.
• Keep the cord away from hot surfaces, including stoves.
• Do not use on or near hot surfaces. Never leave unattended during use.
• Keep hands and utensils away from the container during blending to reduce the risk of injury. A scraper may be used when the blender is not operating.
• The protective device (lid) should only be used when the main part of the lid is in place.
• Do not leave foreign objects in the container (e.g., spoons, forks) as this can damage blades.
• Never operate with damaged blades.
• Check blades for damage before each use. If damaged, contact customer service for replacement.
• Always use the blender with the lid and lid plug securely in place. The lid plug is removed only for adding ingredients or using the tamper.
• If ingredients stick to the sides, stop the blender, remove the lid, and use a spatula to dislodge them. Never insert hands into the container.
• Do not attempt to remove the container or lid from the motor base while blades are still spinning. Allow the unit to stop completely.
• Do not overfill the container beyond the "MAX" line to prevent spills.
• When making nut butters or oil-based foods, do not process for more than 1 minute after the mixture starts flowing; prolonged periods can cause dangerous overheating.
• Store power cords safely to prevent children from pulling them.
• Blades are sharp; clean around them with extreme care.
• Never operate with the centering pad removed.
• Ensure the container and blade base align with the centering pad for proper engagement.
• Do not attempt to bypass the locking mechanism.
• Do not use the container to heat ingredients.
• Do not operate continuously for more than 2 minutes.
• Do not attempt to sharpen the blades.
• Do not expose the container to extreme temperature changes.
• Appliance accessories are not designed for microwave use.
• Extension cords are not recommended.
• If the device overheats, a thermal switch will temporarily turn the motor off. Unplug and let it cool for approximately 1 hour before reuse.
• Do not store ingredients in the container after blending if they may expand or release gas, which can cause excessive pressure.
• Never handle the plug with wet hands.
• Always connect the plug to the unit first, then to the wall outlet. To disconnect, turn off controls and remove the plug from the wall.
• A flashing light indicates the unit is ready for use.
• Keep this manual for future reference.

SAVE THESE INSTRUCTIONS

Household use only

Parts & Features

A visual representation of the AMZCHEF ZM5003 Professional Blender. It shows the main blender unit with its jug and lid, alongside a separate travel bottle with its lid and a tamper.

Main Components:

• Main Body: Houses the motor and control panel. Designed with double protection circuits to prevent overheating and overload.
• Container (1.85L): Marked with volume measurements (ounces/milliliters/cups). Designed for easy cleaning without removing the blade assembly.
• Lid (2 parts): Easy to attach and remove. Always use with the lid securely closed during operation, especially with hot ingredients.
• Lid Plug: Inserts into the lid and secures by twisting. Remove by twisting counter-clockwise to add ingredients or use the tamper.
• Blades: Made of ultra-sharp stainless steel.
• Centering Pad: Ensures the container is aligned correctly with the motor base.
• Tamper: Used for processing thicker mixtures and keeping ingredients moving towards the blades. Use only when the main lid is in place.
• Travel Bottle: An accessory for blending and consuming on-the-go.
• Travel Bottle Base: Connects the travel bottle to the main unit.
• Travel Bottle Cap: Seals the travel bottle.

Control Panel:

The control panel features multiple function selection buttons (e.g., SMOOTHIES, ICE CRUSH, PUREE, BLEND, PULSE, LOW, MED, HIGH) and a central START/STOP button. An LED display shows function status and timers.

Specifications:

Function

The blender offers various pre-set functions and manual control options:

• SMOOTHIES / BLEND (120s): For making smoothies with fruits and milk.
• ICE CRUSH (30s): Primarily for crushing ice (max 13 cubes).
• PUREE (120s): For pureeing fruits and vegetables.
• BLEND (150s): For making juice by blending fruits and vegetables with added water.
• PULSE (60s): For quick bursts of power, useful for stirring, cleaning, or final adjustments.
• LOW (150s): Low speed, suitable for jams.
• MED (150s): Medium speed, for soft fruits and vegetables.
• HIGH (150s): High speed, for liquefying hard fruits and vegetables, and dry grinding (e.g., carrots, dry soybeans).
• START/STOP: Activates the selected function or stops the machine.

Notes:

• Ingredients can be added during operation by opening the lid plug. Do not add hot water to avoid burns.
• Do not exceed the 1850 ml fill line in the container to prevent overflow.
• If continuous blending is required, use functions multiple times with a 10-minute interval between uses.
• If the motor overheats, the unit will shut off. Allow it to cool for approximately 30 minutes before continuing.

Instruction and Steps

Follow these steps for operating the blender:

1. Prepare Ingredients: Cut ingredients into approximately 2 cm cubes. Remove any tendons from meat if applicable.
2. Measure Ingredients: Use the lid plug (or a scale) to measure the desired amount of ingredients.
3. Add Ingredients to Jar: Pour the measured ingredients into the blender jar.
4. Add Liquid: Add an appropriate amount of water or other liquid.
5. Secure Lid: Align the jar lid with the jar and press down firmly. Align the small measuring cup with the center of the lid and screw it in to secure.
6. Place Jar on Base: Position the blender jar correctly onto the main body on a flat surface. If the jar does not sit securely, rotate the main unit connector by 15° and place it on the base.
7. Connect Power: Plug the power cord into the outlet. All background lights will flash once, and the START/STOP button will blink. The unit will not power on if the jar is not correctly placed.
8. Select Function & Start: Choose the desired function (e.g., ULTRA BLEND) and press the START/STOP button to begin operation. The sound may vary during operation.
9. Cycle Completion: Upon completion, the blender will beep 5 times and return to standby mode.
10. Using Tamper (for Ice Crush/Dry Grind): When using ice crush, jam, or dry grinding ingredients, remove the small lid plug and insert the tamper to stir ingredients for a finer texture.
11. Serve: Remove the blender jar, pour the contents, and add seasonings as desired. Pour carefully to avoid splashing.

Using the Travel Bottle:

14. Attach Holder: Align the travel bottle holder with the mouth of the bottle and tighten by turning clockwise.
15. Place on Base: Place the travel bottle assembly onto the main body on a flat surface. You may need to press down on the bottle assembly to prevent bouncing at high speeds. Connect the power cord.
16. Select Function & Start: Choose the desired function and press the Start/Stop button.
17. Remove & Seal: Remove the travel bottle. Unscrew the blade assembly counter-clockwise. Attach the travel lid and screw it clockwise to tighten. The blender will beep 3 times upon completion.
18. Check Seal & Carry: After tightening the travel bottle lid, ensure it is sealed properly to prevent leaks. Pull the handle upwards to carry.

Cleaning and Maintenance

PRECAUTIONS:

• ⚠️ To prevent accidental activation, unplug the unit before assembling, disassembling, or cleaning.
• DO NOT immerse the motor base in water or any other liquid.
• DO NOT allow liquids to enter the motor.

IMPORTANT: For continuous and effective performance, do not place the container, lid, or plug in the dishwasher. Clean the device after each use.

1. Cleaning the Container, Lid, Lid Plug, Tamper, and Centering Pad:

• Auto-clean (with container, lid, and plug attached):
• Fill the container halfway with warm water and add a few drops of dish soap.
• Ensure the 2-part lid is securely fitted.
• Run the machine, preferably using the Pulse function several times.
• Rinse with clean water and dry thoroughly.
• Hand Wash (remove container, lid, and plug):
• Wash the container, lid, and accessories with hot, soapy water. Rinse with running water and dry well. The centering pad can be removed for more thorough cleaning.
• ⚠️ Handle the blades with care to avoid cuts from sharp edges.

2. Cleaning the Motor Base:

• Wipe the motor base with a soft, damp cloth to prevent scratches.
• Do not immerse the motor base in water or other liquids. Ensure no liquid enters the motor.

STORAGE:

1. Unplug the unit.
2. Ensure all parts are clean, dry, and stored in a clean, dry location.
3. Store the blender upright with the lid securely in place.

Troubleshooting

⚠️ To reduce the risk of electric shock and unexpected operation, turn off the power and unplug the unit before troubleshooting.